"AUTO" is the more energy-efficient option, as it runs the fan only when
Keeping your fan on AUTO is the most energy-efficient option. The fan only runs when the system is on and not continuously. There is better dehumidification in your home during the summer months. When your fan is set to AUTO, moisture from cold cooling coils can drip and be drained outside.
The main benefit of setting the thermostat to 'Auto' is that it will result in more energy efficient usage. This is because the fan will run only when it's required. Also, the air filter will need to be changed or cleaned less frequently when the thermostat setting is set to 'Auto'.
Using the “Auto” Setting
This setting offers benefits including: Increased energy efficiency by running the fan only when needed. Extended filter life as the fan operates less frequently. Lower energy bills due to reduced electricity usage.
The fan setting pulls air through the filter continuously, offering an effective way to clean the air if you're suffering from poor indoor air quality. If you're dusting, vacuuming, sweeping, or completing projects that release odors and particles into the air, consider turning on the fan setting while you work.
"AUTO" is the more energy-efficient option, as it runs the fan only when heating or cooling is actively needed. "ON" keeps the fan running continuously, which can help with air circulation and filtration but may consume more energy.
If you're asking “Should the fan be on when the heat is on?”, think about your priorities. Keeping the fan on auto is fine if you prioritize energy efficiency. If comfort and air quality are at the top of your list, keep the fan on.
The fundamental difference between the “auto” and “on” settings is that the fan runs continuously with the “on” setting, even if the heating unit shuts off. The “auto” function allows you to control how long the fan operates. Once the set interior temperature is reached, the unit and the fan stop.
By some estimations, experts report that homeowners can save as much as 15% on heating costs when they run ceiling fans during the winter. Due to the improved distribution of heat in the room, thermostats can be turned down. When you do that, your heater runs less often, consuming less energy.
The heater might blow cold air rather than warm if the gas line supply has been turned off. This usually happens when something goes wrong with the heater, and it breaks. For example, maybe there was a problem with a gas valve, the gas supply pipe, or something else in your furnace broke down.
In most cases, auto is the best option, but there are instances where you may want to use the on setting or a combination of both called circulate. There is no right or wrong answer, but by understanding the pros and cons of each setting, you can use them more efficiently for your home.
A temperature of 68 degrees Fahrenheit is often considered the best temperature to set thermostat in winter to save money. But why is 68 degrees the best winter thermostat setting? In winter, heat loss through walls, windows, and doors is a significant contributor to energy wastage.
'Auto' or 'Twice' means the heating goes on and off during the day at the times it has been programmed to do so.
The Advantages of “Auto”
Lower Utility Bills — Since the blower only runs when heat is needed when your heater is set to “AUTO,” it requires less energy than if it were set to “ON.” This can lead to lower utility bills if you can put up with slightly cooler temperatures.
You can run your system's fan independently of heating or cooling. So your system doesn't need to be actively heating or cooling to run the fan. However, you can only run the fan when your thermostat is set to a temperature mode (like Cool mode, for example).
During the winter months it is best to allow your heat pump to run at a lower fan setting and spread heat out more evenly over a longer period of time. The reason for this is two fold: Maintaining temperature over a longer period of time is more efficient than getting a room to temperature quickly.
When it comes to whether you should set your furnace fan to “on” or to “auto” in winter, the answer for me is “auto” because it's the move that has the most to do with energy efficiency. It is not, however, the only thing you can do this winter to bolster your HVAC system's energy efficiency.
The fan only turns on when cooling or heating is required. If you are generally as comfortable in one room of your home as the next, you'll want to use the AUTO setting. The AC fan kicks in when needed and stops running when the job is done.
Since the AUTO setting means the fan is only engaged when the system is on, rather than constantly blowing, AUTO is the most energy-efficient option between the two settings. This means you'll be using less energy and saving money on your electric bill by using the AUTO setting.
Keeping the fan on creates a more even distribution of heating and cooling, circulating the air if you have cold or hot spots in your house, like a bedroom above a garage. Less frequent starts and stops of the fan can reduce the stress from startup, and potentially help extend it's lifespan.
• AUTO (automatic) mode
Automatic mode sets the thermostat to follow the temperature program.
Cool mode: Ideal for hot days, this mode reduces the room temperature to your desired setting. Dry mode: Perfect for humid conditions, this mode removes excess moisture from the air without significantly reducing the temperature.
Leaving the fan running reduces wear and tear on the motor since it's not starting and stopping repeatedly. It's also beneficial to boost filtration, but leaving it on this setting has more drawbacks than benefits. When it runs nonstop, the fan consumes more energy, and the air filter needs frequent replacement.
The ideal thermostat temperature in the winter is 68 degrees Fahrenheit when you're at home. Energy.gov suggests that 68 degrees is a good room temperature while you're awake at home but recommends lowering it while you're asleep or away.
With a furnace blowing cold air, the first question you should ask is if the furnace has been turned ON. Two thermostat issues that could cause your furnace to blow cold air include (1) your thermostat is still set to COOL, not HEAT and (2) your thermostat fan is set to ON, not AUTO.