Always install the tile to the wall, under appliances, and cabinets. Good flooring could be in place for 20 years or more. In that time there could be water leaks, appliance failures cabinet damage that requires replacement, electrical problems that require cabinets to be moved, etc...
Putting a refrigerator on a floating floor is a little risky but not impossible. As much as possible, ensure that the floor does not come in direct contact with the walls or cabinets in the kitchen so that it has plenty of room to shift in any direction without creating problematic lumps.
To be safe, wait 72 hours after laying a tile floor before placing a refrigerator or other heavy items on top of it.
If due to design circumstances (for example an odd appliance height or construction anomaly) your total flooring height will need to be elevated and finished higher than normal—2 inches or more—consider installing flooring before putting in the kitchen cabinets and appliances.
While refrigerators and stoves can be removed easily to install the flooring, the same cannot be said for kitchens with a dishwasher. However, it is possible to install laminate flooring under a dishwasher without completely disconnecting it.
Place a barrier between your appliance and the floor: One of the most effective ways to prevent damage is to place your heavy appliances on a piece of plywood or use some other barrier to ensure the machine is not resting directly on your floor. You can purchase anti-vibration pads from manufacturers and many stores.
Tile installation and more
But once the job is finished, there is a curing process to follow. The curation generally occurs in about twenty minutes; however, the tiles should not be walked on for a solid 24-hour time frame to allow them to set fully.
It shouldn't be walked on or disturbed during the drying process, as doing so could cause a serious misalignment of the tiles you just laid, a problem that would be difficult to fix. This means you need to allow it to dry before grouting.
Any appliance with wheels on it. You install tile underneath it if it isn't permanently installed. If the appliance is in the wall or in the cabinets, you don't have to put tile over it.
Always install the tile to the wall, under appliances, and cabinets. Good flooring could be in place for 20 years or more. In that time there could be water leaks, appliance failures cabinet damage that requires replacement, electrical problems that require cabinets to be moved, etc...
After tiling, you must wait at least 24 to 48 hours before grouting the tiles. The mortar used to adhere tiles to the surface needs to cure before grouting. Mortar and adhesive used to adhere tiles to the floors or walls are made up of cement, fine sand, and water-retaining agents.
Any type of mortar, thinset or grout, that was used to adhere the tiles to the floor and fill in the gaps between the tiles needs to dry completely before pressure is applied. Walking too soon on the floors risks shifting the tiles and disturbing the grout, according to Senior Care 2 Share.
Appliances. The first thing you should understand is that appliances are a standard height of 36 inches and should generally be installed over the flooring. That's because if you need to replace the appliance, you don't want to have to rip out your floors as well.
They tell you not to install any floating floors under appliances only because you are tacking them down by weight and they could possibly fail to expand in any 2D direction if you lay the planks down with appliances on both ends, so they may tent.
Can You Wait Too Long to Grout Tile? There is no harm in waiting more than 24 hours before you grout your installed tile. As long as the tile surface is kept clean and debris is kept out of the seams between tiles, you can allow your mortar to cure for as long as you wish before grouting.
There ARE, however, fast setting thinsets that arre made to set up in as little as 2 hours. Using these thinsets, you CAN set and grout the same day without any risks.
The simplest way to describe grout is as a mixture that helps hold your tiles together. The biggest misconception about grout is that it's used to secure your tiles to your subfloor/walls but in fact that function is provided by tile adhesive. Instead, grout is used to fill the gaps between tiles.
You should wait at least 24 hours after laying the tile to walk on it to avoid damage to the floors.
You should only apply grout sealant to cement-based tile grout. Synthetic grouts such as epoxy and urethane do not need to be sealed; sealing synthetic grouts may do more harm than good for your precious tile grout.
Once all tiles are down, you'll need to wait until the adhesive has set before you walk on them – this can take up to 48 hours. If you're tiling a room which you'll need access to, like a kitchen, bathroom or hallway, tile half the room one day, and the other half the next.
Some homeowners also use felt furniture slider pads or pieces of plywood under their refrigerator. Plastic-cup style or rubber floor protectors are other options, and like some of the others, these will raise the refrigerator off the floor.
The simple answer is YES. You can put vinyl plank flooring under appliances.