Should I put chlorine in my Intex pool?

Author: Rosina Dooley DDS  |  Last update: Wednesday, June 29, 2022

For the greatest protection against algae, bacteria, and cloudy water, Intex pools should maintain a chlorine level of 2.0-4.0 ppm at all times. If you opted for the Intex Salt Chlorinator, you can make your own chlorine by adding the correct amount of Pool Salt to the water.

What chemicals should I put in my Intex pool?

Intex Pool Chemical Startup List
  1. Alkalinity increaser (sodium bicarbonate)
  2. Alkalinity decreaser (sodium bisulfate)
  3. pH increaser (sodium carbonate)
  4. pH decreaser (sodium bisulfate)
  5. Calcium hardness increaser (calcium chloride)
  6. Sanitizer (liquid chlorine, chlorine tablets, Intex saltwater pool system)

Do you need to shock a Intex pool?

We recommend shocking Intex pools every week, especially if you're having a heat wave or heavy rains. Heat and excess water can knock your chlorine levels to sub-par levels pretty quickly. Use a pool shock with a decent amount of available chlorine, and run your filtration system after you shock your pool.

How long can water sit in pool without chlorine?

I think the answer to your question is about 3-6 days. The problem is that the chlorine that you need to keep the bacteria in check is used up more quickly as the temperature rises, the activity increases, and as sweat and other body stuff is put into the pool.

Is it OK to swim in a pool without chlorine?

The Bottom Line about Pools and Chlorine

As mentioned above, you could probably swim in a pool without chlorine without any major health issues. However, long-term use of a pool lacking chlorinated H2O could make you sick or, at the very least, contribute to rashes and other types of skin irritation.

HOW TO KEEP YOUR INTEX POOL WATER CLEAN (TAGALOG) - VLOG# 082

How often should you change inflatable pool water?

For most inflatable pools or plastic kiddie pools following the guidelines listed above, the water should be changed every two weeks at a minimum. If you are not adding chlorine to kill bacteria, drain the pool every other day. Stagnant water without chlorine can become unhealthy water in as little as 24-48 hours.

Can I put chlorine in inflatable pool?

Small inflatable or plastic kiddie pools and water slides don't have the same protection against germs that a swimming pool, hot tub, or water playground do. That's because it is unsafe to add germ-killing disinfectants, such as chlorine or bromine, to the water in kiddie pools and water slides.

How much chlorine do I put in my Intex pool?

Intex Pool Sanitizers

For the greatest protection against algae, bacteria, and cloudy water, Intex pools should maintain a chlorine level of 2.0-4.0 ppm at all times.

Should I cover my Intex pool every night?

You should cover your pool every night for several reasons. First off, a pool cover saves energy and conserves water by decreasing the amount of make-up water. Also, it reduces the consumption of chemicals, and finally, it saves a lot of cleaning time since it keeps the debris out of the pool.

Do you put chlorine in above ground pools?

Add enough chlorine tablets to raise the chlorine level into the 2-4 ppm range, and strive for consistency. Most above ground pools use 2-4 of the 3" chlorine tablets per week, in a chlorine floater or chlorinator.

How many chlorine tablets do I need for a 10ft pool?

Do i fill the whole thing up till filled with tablets? or do i stick one tablet in for a 10ft summer wave pool. thanks:-) Answer: One tablet is all you need.

Can I put a chlorine tablet in my Intex pool filter?

Fill a 5-gallon bucket 3/4 full of pool water, and insert the chlorine tabs into the bucket. Stir the water inside the bucket with a long-handled spoon until the chlorine tablets dissolve. Pour the chlorinated water into the Intex pool, and turn on the pool pump to circulate the chlorinated water throughout the pool.

How do you maintain an Intex above ground pool?

For Intex pools, the go-to approach is to place 2 to 3 chlorine tablets in a floating chlorinator for slow-dissolve release, topping up when they start to run low. You'll want to keep the chlorine level at around 1 to 3 ppm. Any higher and the water will be too harsh on your skin and eyes.

How much liquid chlorine do I add to my pool for the first time?

If the water is clean and clear, then add about 3 oz of liquid chlorine per 1000 gallons of water – while the pool filter is running. This should give you a chlorine level of about 3 ppm.

How do you keep an inflatable pool water clean?

Drain and refill the pool

If your kid's pool is pretty small, and draining and refilling it doesn't feel like a colossal waste of water, then the best way to keep the kiddie pool clean is to drain it when the water's dirty, scrub it down with a plain old kitchen brush and some mild dish soap, and refill it.

Can you put chlorine in a kiddie pool?

Use chlorine. You may be surprised to know that you can use chlorine for kiddie pools! In small quantities of course, chlorine tablets are great to fight bacteria and algae in your baby pool.

How do you keep a kiddie pool clean without draining?

5 Methods for Keeping a Kiddie Pool Clean All Summer Long
  1. Skim the Pool to Remove Debris. If you treat a kiddie pool like a miniature version of an in-ground or above-ground pool, its care is easy to master. ...
  2. Use a Small Pool Portable Vacuum. ...
  3. Get a Pool Filter. ...
  4. Sanitize with Chlorine. ...
  5. Cover the Pool When Not in Use.

Why does my inflatable pool feel slimy?

Skimmer Net

With excessive debris in the water like leaves, pine needles, and dirt, the pool walls will get slimy and grow mildew faster.

How do I clean my Intex inflatable pool?

There are no less than 5 ways to clean the floor of an Intex pool.
  1. Use your Leaf Rake to scoop debris from an Intex pool. ...
  2. Use a Leaf Gulper garden hose vacuum to clean an Intex pool. ...
  3. Use a Vac Head and Hose to vacuum with your Intex pump/filter. ...
  4. Use a Handheld Battery Operated Cleaner to vacuum an Intex pool.

Can you leave Intex pools up all year?

In warmer climates, Intex advises to keep your pool up, if you prefer. However, you must winterize the pool when keeping it full throughout the winter. If your area maintains tropical climates all year long, you may not need to winterize your pool at all, especially if you use your pool on a regular basis.

How often should you put chlorine in the pool?

Shock is liquid or granular chlorine. You should add one gallon (or one pound) of shock per 10,000 gallons of pool water every week to two weeks. During hot weather or frequent use, you may need to shock more frequently.

What can you use in a pool instead of chlorine?

Here are the top 5 alternatives to use in pools instead of chlorine:
  • Bromine.
  • Salt-water system.
  • Ozone generators.
  • Non-chlorine Shock.
  • Mineral System.

How do you tell if a pool is properly chlorinated?

Strong Smell of Chlorine

A healthy, safe pool will have little to no odor. That smell comes when your pool is out of balance. The smell of chlorine arises when the chemicals are dealing with a lot organic material like sweat, urine, and bacteria in your pool.

Previous article
Should curtains touch the floor or window sill?
Next article
When should I drain my pool?