For really wide drawers, we always recommend using two cup pulls, and then evenly space them. As a general rule of thumb, if your drawer is 30″ or wider, I like to use two cup pulls. Lastly, if you have tall drawers, you can either center them in the overall drawer, or install them on the top rail.
Cabinet pulls give a sleek visually appealing look to cabinet doors and drawers. What usually looks best is a pull length that is about 1/3 the height of the cabinet door and 1/3 the width of the cabinet drawer. Your eyes follow the length of the pull up the height of the door or across the width of the drawer.
Rather than using two pulls on wide drawers, you can use a single pull that is longer in length. This can offer a cleaner, more contemporary appearance and it also is easier to operate your drawers with. Using a pull that is approximately 1/3 the length of the drawer is a good rule of thumb.
Stick with the rule of thirds for multiple pulls on a drawer. This means dividing the drawer into thirds and placing the pull hardware horizontally in the center of each left and right section.
Small Drawers that are 12” or less typically work best with a pull that is 3” to 4” long or a knob that is 1” in diameter. Large Drawers that are 30” to 48"will require a pull that is longer than 8" or a knob that is 1" in diameter or greater. Using two pulls or knobs for a large drawer also works great.
If you will have knobs on doors and drawers, stick to the same size or larger on drawers. Wood knobs can go slightly larger than metal knobs, as they are intended to be more robust and are visually lighter than shiny metal. Drawers wider than 18″ need two knobs/pulls, whereas drawer narrower need only one.
As a general rule of thumb, if your drawer is 30″ or wider, I like to use two cup pulls. Lastly, if you have tall drawers, you can either center them in the overall drawer, or install them on the top rail. Knobs: For the most part, we only use knobs on cabinet doors.
Sleek Modern Pulls. Slim and sleek pulls are still the most popular cabinet hardware style. Modern bar pulls, whether tubular or square are top sellers, and for good reason. They look great on most cabinets, come in many finishes, and are a flexible design choice.
The quick answer is no, they don't, but they should complement each other and blend with the rest of the house. For instance, brushed nickel hardware in a kitchen with chrome lights doesn't work because the finishes look too similar, and they are different styles (traditional vs. contemporary).
Pulls 3-7 inches in length will sit the most comfortably on doors less than 24 inches tall. Cabinet doors 24-36 inches tall are best adorned with pulls 7-12 inches long, while cabinets taller than 36 inches such as pantries, built-in appliances and pullouts should be accompanied by pulls longer than 12 inches.
For standard size cabinetry (dimensions of 12″ – 36″) the most common pull sizes are 3”, 4”, 96mm, and 128mm center to center (from one screw hole to another).
Alternatively, you may opt to install two smaller pulls on a drawer wider than 24 inches using the same rules as installing two knobs. Pro-tip: Generally, you will want to place all your knobs or pulls in the middle of each drawer.
Mounted on the door stile, cabinetry knobs are placed on the opposite side of the door hinge + typically 2-½” to 3” from the bottom corner of the door for upper cabinets. While on base cabinets knobs are usually placed 2-½” to 3” from the upper corner of the door.
There's no "rule", it's a matter of looking at as many kitchens as possible and figuring out the look you prefer. I also used a variety of sized pulls on drawers of different widths, and used Restoration Hardware.
Does door hardware have to match? Door handles, fixtures and fittings, and other hardware don't have to match exactly, but they should blend together to make a harmonious space. If you want a cohesive aesthetic, select hardware that's a similar colour to the finish on your fixtures and appliances.
MIXING HARDWARE STYLES
Choose a single finish. It's much easier and safer to mix different shapes of knobs and pulls in one matching finish. Think about the number of drawers and doors. It can be easier to make multiple styles of hardware work in a larger kitchen with many doors and drawers.
Traditionally knobs are used for cabinet doors and pulls are used on cabinet drawers however these days anything goes. You will often see people using knobs for drawers for consistency or based on the size of the drawers.
What Colour Doors Knobs Are In Style For 2023? In 2023, the most on trend colour door knobs are matte black, sage green, polished brass and aged brass metal finishes.
Matte Black Continues
Matte black hardware will continue its dominance in 2023, and we can't get enough! This trend is ideal when used as part of a monochrome decor scheme or as a statement piece against bright colors.
Matte Black & Gold Cabinet Hardware
Whether separate or together these colours are dominating the 2023 kitchen trends. Perfect for modern or traditional hardware these colours are complimentary to all types of cabinetry colours.
If you do, the common rule of thumb for placement is to divide the drawer into thirds, and install the hardware in the left and right thirds.
It depends on the size of the drawer. Standard base and wall cabinets are usually between 12 and 36 inches. If this is the case, it's typical to use 3- or 4-inch pull handles. If your cabinets are larger than standard, you'll need larger pulls.
On wall cabinets, knobs are usually placed 2-1/2” to 3” from the bottom corner of the door. On base cabinets, they are placed 2-1/2” to 3” from the upper corner of the door. On drawers and pull-out cabinets, drawer pulls and knobs are typically centered on the drawer front.