Do Not Keep the Fridge Open Unnecessarily. This applies to both new and old fridges. Anyway, make sure that you are not keeping the fridge open for too long as warm air will enter the fridge. It will put extra pressure on the compressor since the component will need to give more effort to keep the fridge cool.
Once the unit is in the house you should: Leave the appliance to sit for 3 hours. Then plug it in and switch it on. It should then be left overnight to stabilize before putting any fresh food into it.
You should leave your fridge/fridge freezer to settle for at least 4 hours. Once 4 hours have passed, you can plug your appliance in. When doing so, make sure that the thermostat control is set to on. Before placing food into the appliance, allow your fridge some time to cool down to temperatures safe for food storage.
The reason you cannot turn on a new refrigerator right away, is the freon has to settle into the holding tank before the compressor forces it to move through the cooling system. You can risk damaging your compressor and other components if you do not let it settle for a day or so before turning it on.
Once you have received your new refrigerator it is best to let it sit for at 4 hours before you turn it one. This needs to be done to let the gas and lubricants settle back into the compressor again. You will then need to wait for your refrigerator to come to temperature before you start to use it.
Once you've connected your refrigerator to the main water supply, allow it to sit for 12 to 24 hours before plugging it in. Plug your fridge into its designated electrical socket.
Turning the fridge on too soon can lead to a coolant rush, which can cause problems like leaks or blockages. This can damage the fridge, and you may need to pay for expensive repairs. Waiting allows the coolant to settle back into its correct position and ensures that there are no leaks or blockages.
Never lay a refrigerator on its front or back as it could cause damage. It is advised to strap it standing upright to the side of a moving truck or other tall truck. If the refrigerator must be laid down, only do so on the left or right side.
According to Whirlpool, it generally takes about 24 hours for a fridge to reach the correct internal temperature of 37 degrees Fahrenheit to 40 F (3 C to 5 C). During this time, the fridge is working to remove heat from the interior and establish a stable environment for food storage.
To keep your fridge or freezer working properly, it's recommended to wait a few hours, at least 4-6 hours, before plugging it in after it's been moved. This allows the compressor oil, which lubricates the internal components, to settle back into place.
Avoid using any chemical products– soap and water will work best. Wipe the inner walls and all the shelving. If your refrigerator comes with an ice maker or water option, you will want to run some water through the lines before ingesting it.
Fridge temperature settings are generally numbered from 1 to 5, with 5 being the coldest. A fully stocked fridge may need to be set to a higher setting (around 3 or 4), whereas one with more space is best suited to temperature setting 2 or 3.
If it is transported upright, wait at least two to three hours before plugging it in. If transported on its side, turn it upright and let it stand for at least four hours.
Run two to four gallons of water through the new filter. This helps prevent your water dispenser from sputtering and clears impurities left over from manufacturing. Check for leaks around the filter.
Cool down your food before you put it in the new refrigerator. This will help ensure it maintains a safe temperature. If your refrigerator or freezer isn't at the right temperature after a day, contact either the store you purchased it from or the manufacturer for advice on how to get it to the right temperature.
Let it stand
In transit, your appliance gets shaken around, so it's best to let everything settle before you plug it in. If it was transported upright, give it at least an hour before you plug it in. If it was transported on its side, turn it the right way up and leave it for at least four hours.
Depending how you moved your fridge, it is best to wait at least 24 hours before plugging it in. If you moved your fridge lying down or on its side, it might be best to wait 24 – 48 hours to allow all the fluids to settle back.
Our Top Pick: LG produces excellent refrigerators that perform well in our tests and receive high satisfaction ratings from consumers, including our survey participants. The Smart French Door Refrigerator with Dual Ice Maker stands out for its simple, user-friendly design and customizable features.
Many Refrigerators come with a cardboard or metal cover on the rear of the Refrigerator, at the bottom. This should not be removed, as it protects components at the bottom of the Refrigerator.
How Long Do Refrigerators Last on Average? Estimates range in terms of how long fridges last; some sources say 10 years while others say as long as 25 years. According to the United States Department of Energy, refrigerators last approximately 12 years.
How long should I wait after plugging in the refrigerator before putting food in? After plugging the refrigerator in, wait two to four hours and verify that the unit is cooling before putting food inside. Only add food to the freezer once the freezer temperature is below 0°F (-18°C).
Fridge freezers repair and gas refilling on-site ,R400 for gas refill. 0646213749 call or WhatsApp Lesley for assistance.