CO detectors are very sensitive and designed to alert occupants before CO reaches dangerous levels. If your detectors go off, call 911 and evacuate the home. Be sure to notify them if anyone in the house is experiencing flu-like symptoms.
Install a CO detector:
If your CO detector goes off and you feel ill, leave the house and call 911 or the local fire department.
Yes, if a carbon monoxide (CO) alarm goes off, you should take it seriously. Here are the steps you should follow: Evacuate Immediately: Get everyone out of the building and into fresh air. Call 911: Once you are safe, call emergency services to report the alarm. They can send professionals to assess the situation.
If it still sounds, call the fire department. If the CO alarm sounds, immediately move to a fresh air location outdoors or by an open window or door. Make sure everyone inside the home is accounted for. Call for help from a fresh air location and stay there until emergency personnel.
There is no per-call charge for calling 9-1-1. However, EMS/ambulances dispatched through 9-1-1 may charge for taking someone to the hospital; this is a separate ambulance charge, not a 9-1-1 charge.
Your carbon monoxide alarm is going off for one of the following reasons: It is doing its job properly and detects CO pollution in the air. It is a false alarm caused by other household items. The detector is malfunctioning or the batteries need changing.
The most common symptoms of CO poisoning are headache, dizziness, weakness, upset stomach, vomiting, chest pain, and confusion. CO symptoms are often described as “flu-like.” If you breathe in a lot of CO, it can make you pass out or kill you.
If you experience symptoms that you think could be from CO poisoning: DO GET FRESH AIR IMMEDIATELY. Open doors and windows, turn off combustion appliances and leave the house.
If you “shut it off” it will not be working, so will not detect carbon monoxide. If you reset it, it will activate again if carbon monoxide is detected, as long as the battery/power supply is within normal operating limits. A low battery may cause the alarm to “fail safe” and activate to notify that it needs replacing.
Call 911 and report what is happening. Immediately leave your residence and wait for the fire department to arrive. Once there, we will send in a team with special monitoring equipment that will take air readings and determine the next appropriate action.
What Does an Emergency Alarm Chirp Mean? This meaning is probably the most self-explanatory. When your carbon monoxide detector chirps 4 times in a row and pauses, this means it has detected unsafe levels of carbon monoxide. This means your entire household should evacuate immediately and seek fresh air.
If you have a carbon monoxide detector chirping and then it stops, it's important to take the situation seriously, even if the alarm is no longer sounding. Even if the alarm has stopped, get everyone out of the home to a place with fresh air. Contact 911 or your local fire department to report the incident.
Yes, the fire department can check for carbon monoxide. If you suspect the presence of carbon monoxide in your home or building, it's essential to act quickly. Evacuate the area, ensure everyone's safety, and call your local emergency services or fire department.
If the alarm sounds, vacate the house. Then, it's best to call 911 or the fire department to come out and test for the source of carbon monoxide. Once they've identified what is causing carbon monoxide to be released in your home, you'll need to contact a licensed professional to service the offending appliance.
If no one is feeling symptoms, ventilate the home with fresh air and turn off all potential sources of CO. That includes your oil or gas furnace, gas water heater, gas range and oven, gas dryer, gas or kerosene space heater, and any vehicle or small engine.
If your detectors go off, call 911 and evacuate the home. Be sure to notify them if anyone in the house is experiencing flu-like symptoms. The Fire Department has specialized equipment to detect and measure amounts of CO in your home.
While CO detectors are designed to be reliable, various factors can cause them to beep erroneously. False alarms can be caused by incorrect installation, placement near a source of fumes or steam, or even a buildup of dust and dirt on the sensor.
CO levels in the home are measured using two factors: parts per million (ppm)—from 0 to 1000-ppm—and the length of exposure. In other words, your carbon monoxide detector should not sound unless it detects 49 ppm over a 10-hour period, or 400 ppm during 4 to 15 minutes.
Even with the doors and windows open, any of these activities can trigger carbon monoxide detectors. Using a grill inside the garage or near open doors and windows–Not only is barbecuing among the most common CO-producing activities, but it can also be a fire hazard when done too close to your home.
Push and hold the silence button for 5 seconds to silence the alarm while contamination is being burned off the sensor. You may need to do this a number of times to give the carbon monoxide alarm enough time to reset.
Don't re-enter the home, even after the alarm stops going off. Open doors and windows may allow the CO in your home to dissipate, but you don't know if the machine that triggered the alarm has stopped producing carbon monoxide. CO could build up again once you're inside.