In general, it's wise to position the blind as far back as possible, without it being obstructed by anything like trickle vents or window handles. This way you'll minimise light bleed around the edges if you've gone for a roller blind, and maintain as much windowsill space as you can!
In conclusion, there is no right or wrong way to decide which way round a roller blind should go, simply your preferences and the environment in which you are fitting the blind.
You can either mount your blinds inside or outside of the casing. Hanging the blinds outside means your window look bigger but when you hang your blinds inside, your window looks slimmer. When you need to mount your blinds outside, measure along the outside edges of the casing that surrounds the window.
If your window depth is larger than ¾”, your blinds will not be flush but can still be installed inside the window frame. If your shallow window depth is less than this, your blinds will have to be mounted outside the window frame in order to secure the brackets.
In general, it's wise to position the blind as far back as possible, without it being obstructed by anything like trickle vents or window handles.
Factory Deductions: Inside mounted products have a light gap between 1/8” and 1/4” on either side of the window – this gap is required in order for the product to operate properly.
A good rule of thumb is to hang your blinds as close to the window as possible when hanging them inside of the recess, without getting so close to the window as to risk the blind catching on handles and/or sticking to a condensated window for fabric blinds.
Privacy: Blinds that touch the sill can improve privacy, especially in spaces like bathrooms or ground-floor rooms. Day and Night Blinds and Roman Blinds benefit from this setup as they prevent gaps through which people can see. Temperature Control: In colder months, blinds that touch the sill can help retain heat.
For homeowners looking for an efficient, smart look in a room, then fitting blinds inside the window recess is the ideal answer.
When it comes to hanging your new roller blind you will want to make sure that the face of the fabric is facing inwards towards the room whether it's a standard roll or reverse roll.
When the blinds are turned up, the rounded side faces outward. Blinds turned in this direction offer more privacy and light control since the convex side faces the window, blocking light or views from the outside.
Whether you can see through blinds depends on their type, material, and position. Horizontal blinds, when fully closed, offer high privacy, while tilted slats allow partial visibility. Vertical blinds also block the view effectively when closed but permit some visibility when slightly open.
The real answer is it's up to you, however the most common option is a back roll for face fit roller blinds and front roll for recess fit.
Aid in Better Sleep
This is especially important for light-sensitive sleepers or those living in well-lit areas. Closing your blinds ensures that your bedroom remains a sleep-friendly sanctuary, promoting healthier, more restorative rest.
The cost to install blinds or shades varies based on many factors. The Home Depot offers basic installation starting at $119 for up to 10 blinds, but also has custom options available starting at $250 per window.
Inside-mounted blinds are installed within the window. Blinds with outside mounts are installed to cover the window frame or attach to the wall. If the window frame is sufficiently deep to attach the mounting brackets inside the window frame, you can choose inside or outside mounting.
Inside mounts are the most popular choice. They offer a clean, finished look because the blinds or shades are recessed and contained inside the window casing. Inside-mounted window treatments are NOT the best choice for you if: Your window frame is not deep.
To maximize privacy and enhance insulation, it's recommended to turn the louvers so that the coated side faces outward. However, it's important to note that the difference in insulation effectiveness between the two directions is minimal due to the slender nature of the louvers and coating.
A blind that is fitted within the window recess means it is the same size as the window and will fill that area. This is known as recess fitting. Whereas a blind that is fitted outside of the recessed area is commonly referred to as an exact fitting.
It should be flush with the wall's surface.
Measure both the width of the window and the height of the window. Consider adding an extra 3 inches to the width and height for optimum light control and privacy. Extending the blinds outside the window will also provide the space needed for the mounts and help the window appear larger than it actually is.
Yes, for your blinds to work to greatest effect and to achieve the right visual finish, window blinds should rest on the windowsill. The only exception to this is vertical blinds which require a small amount of clearance to prevent the louvres from dragging on the windowsill when operated.
Fitting a blind inside the window recess will reduce any light ingress around the edges of the blind. A blind fitted outside the recess will project away from the wall by approximately 4.5cm once the headrail is installed and light can pass around the edges of the blind.