For the wire shut-off arm on a standard refrigerator ice maker, down is on and up is off.
For most refrigerators, down is ON and up is OFF.
To make ice, the metal or plastic feeler arm (shut-off arm) must be in the DOWN position. Raising the arm to the UP position turns the ice maker OFF.
Keep the ice maker arm in the down position to make ice. When the arm is lowered, the ice maker is ON. When the arm is flipped or stuck in the up position, the ice maker is OFF. The arm acts as an automatic shutoff that detects when the bin is full and raises itself to stop producing ice.
The icemaker in your refrigerator can be turned on and off. This is helpful if you have a problem with the icemaker working properly, or want to turn it off while on vacation.
For most shut-off valves, check the position of the handle or knob relative to the pipe:
To check if your ice maker is on, locate the power switch or the metal feeler arm inside or on the front of the unit. The method varies slightly depending on your specific refrigerator model:
The bar should be down to make ice. Up if you would like it to stop making ice.
For a Frigidaire ice maker to make ice, the metal sensor arm must be down. Lowering the arm enables the automatic ice production, while raising the arm to the top position shuts the ice maker off.
To reset your ice maker, locate the reset button (or power switch) on the side or bottom of the unit, hold it for 3-5 seconds until it chimes or cycles, or power cycle the refrigerator by unplugging it for 5 minutes.
For your KitchenAid ice maker, the wire shutoff arm should be DOWN to make ice. Lowering the arm turns the ice maker on. When the ice bin is full, the accumulating ice will push the arm UP, turning the ice maker off automatically.
If you're wondering if you can leave a portable ice maker on, the easy answer is that yes, you can. But keep in mind that the insulation and freezing process on a portable ice maker is not the same as that of a freezer.
To turn your ice machine back on, locate the control inside your freezer. Most refrigerators use either a metal wire arm or a physical toggle switch on the side of the ice maker.
The bin on compact machines is insulated, yet it is not a freezer. Ice that sits for long periods melts and returns to the reservoir, then the unit recycles that water into a fresh batch. Anyone who needs to hold ice for hours should move it to the kitchen freezer.
On LG refrigerators, you can tell the Ice Plus feature is on because its encircled snowflake icon will be brightly illuminated on your control panel. When the feature is off, the icon will remain dark and unilluminated.
For most refrigerators, the ice maker shut-off arm (or wire lever) should be in the down position to make ice.
"Bar down" is a hockey term for a perfect shot that hits the bottom of the crossbar, deflects downward, and goes directly into the net. Also known as "bar south" or "top shelf," it is one of the most celebrated and difficult shots in the sport.
To make ice, the metal or plastic feeler arm (shut-off arm) must be in the DOWN position. Raising the arm to the UP position turns the ice maker OFF.
To check if your ice maker is working, first verify it is switched on and that the freezer is cold enough (ideally between 0∘F and 5∘F). Inspect the ice bin to see if it is empty despite being on. Listen for an active hum, motor noise, or the sound of water filling the tray.
Adjusting your ice maker typically involves modifying the cube size/thickness or water fill levels, which can be done via the control panel or a physical adjustment screw.
For the most common types of valves (ball and butterfly valves), the valve is open when the handle is parallel (running in the same direction) to the pipe. In this position, the internal hole aligns with the flow to allow liquid or gas to pass through.
Open: The handle is parallel to the pipe. Imagine the handle as an arrow—if it's pointing along the pipe, flow is moving through. Closed: The handle is perpendicular (crosswise) to the pipe. The arrow is now pointing across the pipe, blocking the path.