Is there a reset button on AC units?

Author: Dr. Marcus Gottlieb DVM  |  Last update: Saturday, April 19, 2025

Power down your AC: Turn off your AC unit and unplug it from the power source. This will ensure that you stay safe while working on the unit. Locate the reset button: Most air conditioning units have a reset button located near the outside unit. It is usually a small button located inside a small hole.

Where is the reset button on my AC unit?

Look for it first around on the exterior of your machine, especially along the bottom edge near the ground. An AC's reset button is typically red and visible, so it should be easy to spot. If you don't see a reset button on the outside, it could be located inside the unit behind the service panel.

Why is my AC running but not cooling?

There are a number of reasons why your air conditioner might be running but not cooling. It could be an issue with the thermostat, the compressor, or the evaporator coils. Or, it could simply be clogged with dust and debris, which is preventing it from working properly.

Will an AC unit reset itself?

Your AC unit may in fact have its own reset feature already. This feature will likely perform this entire process for you when selected.

How do I reset my central AC not blowing cold air?

Use these tips to reset an air conditioner using the reset button:
  1. Turn your thermostat to the “off” setting.
  2. Turn off the circuit breaker that powers your AC.
  3. Press and hold the reset button for three to five seconds.
  4. Restore power to your AC by flicking the circuit breaker back on.

Is there a reset button on outside AC unit?

Where is the carrier AC reset button?

In most cases, the small red reset button is inside the AC's compressor. If unsure, you can always refer to the user's manual to find the exact location.

What is the first thing to check when the AC stops working?

Check these issues when the unit won't kick on: Check the thermostat and adjust the settings if it isn't set to Cool and an appropriate temperature setting to call for cooling. Examine the house circuit breakers for the AC unit and reset any tripped breakers. Check the air filter and replace the filter if it's dirty.

How long should I leave my AC off to reset it?

After finding the circuit breaker for your AC unit, flip it to the off position. Leave it off for around 30 minutes, then flip it back to the on position. If you have fuses, you can only reset the AC by taking the fuse out.

Why is AC not blowing cold air?

First, check your filters and coils for dirt and debris that may be impeding airflow. Once you've cleaned the filters and coils, run the air conditioner with just the fan so that the ice accumulation can melt off. If the AC still doesn't blow cold air, it could be that refrigerant levels are too low.

Where is the AC breaker located?

Circuit breakers can be found in homes, businesses, and industrial facilities. They are typically located in the main electrical panel, which is typically located in the basement or garage.

Should I turn off the AC unit if it's not cooling?

Turning off your AC when it's not cooling is more than a precaution; it's a necessary first step in troubleshooting and protecting your system from further damage. By understanding when to perform simple checks and when to call in the experts, you ensure your air conditioner remains a reliable refuge from the heat.

How to unclog a condenser coil?

What Is the Best Way to Clean AC Coils?
  1. Step 1: Turn Off the Power to Your Air Conditioning System. ...
  2. Step 2: Remove the Outer Cover of the Air Conditioning Unit. ...
  3. Step 3: Clean the Coils and Fins. ...
  4. Step 4: Apply Coil Cleaner. ...
  5. Step 5: Rinse the Coils and Fins. ...
  6. Step 6: Let the Coils Dry.

How to check if AC is cooling properly?

Ways To Check If Your AC Is Working Properly
  1. Check the Air Flow. If your AC is trying to cool a room that continues to stay excessively warm, it may not getting enough airflow through the vents. ...
  2. Check the Thermostat. ...
  3. Check for Refrigerant Leaks. ...
  4. Check the Smart Settings. ...
  5. Check the Outdoor Unit.

Do all outdoor AC units have a reset button?

Not all air conditioning units have a reset button, but if yours does, it's typically located on the outdoor unit. Here's how to locate it: Turn Off the Power: Before you search for the reset button, ensure the power to the unit is turned off for safety reasons.

Why is my AC unit not kicking on?

Check the thermostat

You should check if it's been set to the correct temperature and also make sure it's set to “cool”. If the AC settings are not right, it won't turn on. You can also check if the batteries in the thermostat are fresh and replace them if needed.

How to know if refrigerant is low?

Warning Signs of Low Refrigerant in Your AC or Heat Pump
  1. Weak Airflow or Warm Air Blowing from Vents. ...
  2. Poor Cooling Performance. ...
  3. Constant Cycling On and Off. ...
  4. Ice Buildup on Refrigerant Lines or Evaporator Coil. ...
  5. Hissing or Bubbling Noises.

How to reset a thermostat?

Most modern thermostats will have a clearly marked reset button inside the panel. It's usually small and recessed, so you might need a pointed object like a paperclip to press it. For those wondering specifically how to reset air conditioner thermostat models, the process is generally the same.

Should my outside AC unit be blowing cold air?

If your air conditioning unit is ac blowing cold air outside, it might mean there's a problem with cooling the air inside. This could be due to refrigerant leaks, frozen coils, electrical issues, or airflow problems. It's important to find out why to fix it and keep the cold air inside.

How do I manually reset my AC unit?

Press the reset button. Most models require you to hold the button down for 3-5 seconds before releasing. Restore power to your AC. Restore power to the unit at the circuit breaker, and make sure the unit is set to “on” and your thermostat is set to “cool.”

What is the 3 minute rule for air conditioners?

Depending on the system, an optimal time of 3 minutes is required before switching the system on. If the system is turned on without waiting for at least 3 minutes, the system can start with a pressure load. This pressure load prevents the system from cooling properly, which could affect the system in the long run.

Why is my AC running but not blowing cold air?

If your AC is running but not cooling, it could be due to a dirty air filter, incorrect thermostat settings, a malfunctioning thermostat, a refrigerant leak, dirty condenser coils, blocked vents or ducts, a faulty compressor, frozen evaporator coils, or electrical issues.

Should I turn off AC if it's not cooling?

If your AC unit is not cooling at all, it may indicate a malfunction within the system that could worsen if the unit continues to run. By shutting off your AC, you allow the system to rest, potentially preventing further damage until an HVAC professional can inspect it.

How much does a compressor cost for an air conditioner?

On average, AC compressor costs range from $800 to $2,300, with most folks paying $1,200 for a new one. However, your price will vary depending on factors like the size and brand of your compressor. Before you schedule your replacement, read on to learn about all AC compressor cost factors.

How to fix an air conditioner that is not cooling?

The following are a few things to check when your air conditioner is not cooling your space.
  1. Check and reset the thermostat.
  2. Replace the dirty filter.
  3. Clear the clogged condensation drain.
  4. Try to diagnose duct malfunctions.
  5. Clear the area around the compressor.
  6. Buy a more powerful air conditioner.

Previous article
Why does my AC run for 15 minutes then shut off?
Next article
How do you prune drooping leaves?