For coffee, tea or juice stains, wash the tile surface with hot water and detergent, then blot with hydrogen peroxide. For grease stains, wash with club soda and water, or a commercial floor cleaner. For ink stains, soak a cloth in diluted bleach and lay it on top of the stain.
Clean ceramic tile floors with warm water or a mixture of warm water and a few drops of mild dish soap.
Cleaners with lemon or vinegar shouldn't be used, as they can etch the tile's surface. Also, avoid anything that may scratch the marble, such as brushes with tough bristles or scouring powders. Granite Tile: Granite tile should be cleaned with a mild pH-neutral detergent like slate and marble tile.
In a bowl, combine 2 cups water, 1.5 cups baking soda, 1/3 cup vinegar, and 1/3 cup Dawn. Using a spoon, gently stir, making sure there are no lumps. Add the mixture to a clean spray bottle. Spray the floor with the mixture.
To revive dull, faded tiles and give them a gorgeous shine, an ammonia-water mix is one of the best. This inexpensive and easy-to-use solution is powered by the natural cleaning properties of ammonia and will leave your tiles looking their best. To start, mix equal parts water and clear ammonia in a small spray bottle.
Hydrogen peroxide won't damage normal tiles or colored grout. However, you shouldn't use it on polished marble. Cleaning with hydrogen peroxide and baking soda is a great way to remove stubborn stains from your grout.
With proper care, you can keep tile floors looking like new. Add 1/4 cup of Pine-Sol® Multi-Surface Cleaner to a bucket containing a gallon of water. Wet a cloth or chamois mop in the mixture. Wipe down the tile floors thoroughly.
You can safely use vinegar to clean ceramic or porcelain tiles, whether they are glazed or unglazed. For other types, however, like terracotta, marble or grante, we recommend you look for ph neutral cleaner that will not harm the material.
You can also use a mixture of baking soda and ammonia solutions which can be very useful in removing grime, dirt, and difficult-to-remove dirt. The use of such a mixture is also safe for the tiles.
The most common and effective homemade grout cleaner is a mixture of baking soda, hydrogen peroxide, and dish soap. Cream or tartar and lemon juice is the best all-natural solution for whitening. Avoid using highly-acidic solutions like vinegar because they can corrode grout.
Add baking soda and white vinegar (1:1) to a bucket of warm water. Now add a tablespoon of any liquid dishwasher and mix well. You can also add any essential oil to it for a pleasant fragrance. Dip a mop in the solution and swab the floors.
Windex can also be used to clean tiles and grout, without causing any damage.
“Vinegar is a good cleaner because it's acidic, but when you add dishwashing liquid/dish soap to it (which is a base or neutral) - you neutralise the vinegar. You take away the very thing that makes it work well. “The dishwashing liquid works that well on its own. Adding the vinegar is a pointless step.”
You can also use the vinegar and water solution in a spray mop. Air dry. There's no need to rinse your vinegar-mopping solution from your floors.
The vinegar penetrates into the pores of the grout, further weakening the material. Over time, vinegar will deteriorate the condition of the grout by etching or wearing it away. If, however, you have sealed your grout on a regular basis, the vinegar won't be an issue.
The time that white vinegar should sit on the tile before cleaning depends on the severity of the stains or buildup you are trying to remove. In general, it is recommended to let the white vinegar solution sit for at least five to ten minutes to penetrate and dissolve any dirt, grime, or soap scum on the tile surface.