You can either pour cola directly onto the stains themselves or cover the entire inside of the bowl by putting cola into a spray bottle and spraying on a light coating. Letting the cola sit for several hours will improve its effectiveness. Before flushing, use a toilet brush to scrub away the stains and flush.
Can You Clean Toilets With Coca-Cola? Yes, although we don't recommend using Coca-Cola every time your toilet needs a good scrubbing, as the dark color of the carbonated soda can actually stain the bowl and leave a sugary residue when used excessively.
For example, applying white vinegar or lemon juice and scrubbing with a toilet brush typically works on newer stains. You can also try mixing white vinegar and baking soda if you need a stronger scrub. For older stains, using an industrial-strength cleaner like CLR should do the trick.
By pouring a caustic soda (coke, for example) into the toilet bowl, you can speed the dissolving process along considerably. Simply dump a can of cola in the water and let it eat away at the debris. Just be sure never to flush the toilet when the water level is already high.
Citric acid
Simply pour a kettle of almost boiling water into the bowl, follow up with 250ml of citric acid, and leave it for some hours – preferably overnight.
Pour white vinegar into the bowl to cover the stained areas. Let the vinegar soak for 30 minutes to an hour. Scrub the stained areas with a toilet brush. If the stains persist, sprinkle baking soda on the remaining stains and let it sit for up to 10 minutes, then scrub again with the toilet brush.
Mix equal parts of lemon juice and borax to form a paste. Apply the paste to the affected areas and let it sit for at least two hours. Use a toilet brush to scrub the rust stains away, and finally, flush the toilet. Repeat the process as necessary until the rust is completely gone.
The fizzing reaction and gas created may help loosen some small blockages. However, it is not typically strong enough to break down larger clogs or remove hard-to-reach debris. As a result of the above facts, if you have a serious drain clog, using baking soda and vinegar is unlikely to be effective.
White vinegar is a common household product. It makes for an excellent ally when it comes to descaling toilets. The mild acid can dissolve limescale and disinfect. All you need to do is pour a generous amount of white vinegar down your toilet bowl, let it soak in overnight, then scrub with a brush.
Pour in Soap & Hot Water
Dish soap is more dense than hot water, and it's also designed to help break down grease and grime—especially mixed with hot water. It should be no surprise, then, that this mixture can also help loosen many materials that can clog a toilet bowl.
The Solution
One easy way to handle iron and manganese is to soak the tank, bowl, and toilet components overnight with white vinegar to break down the mineral buildup.
Who knew that dishwasher tablets could help keep your toilet sparkling clean? Just drop a dishwasher tablet in toilet bowl and let it sit for 10-15 minutes. Then, use a toilet brush to scrub the bowl and flush it. The tablet will help to break down any stains or buildup in the bowl, leaving it fresh and clean.
Vinegar and Baking Soda Solution – If you want a natural solution for cleaning toilet bowl stains, made with vinegar and baking soda, start with the vinegar. Pour a cup in your bowl and swirl it around with the toilet brush. Then add 1 cup of baking soda and another cup of vinegar. Leave to soak for up to 30 minutes.
These stains can be removed completely from your carpet or upholstery, but the best results are achieved when the stain is tackled soon after it has happened.
Try this: Swish a cup of vinegar around in the toilet bowl using a toilet brush, then add a cup of baking soda, followed by an additional cup of vinegar. Let the fizzing solution sit for 10 minutes. Use a toilet brush to scrub stains. Let mixture sit for a few more minutes and then flush.
STEP2 - Pour out a glass of your cola. STEP3 - Cover one side of each coin with Blu-Tac but leave the other side open. STEP4 - Pop your coins into your glass of coke. STEP5 - Sit back and wait but you should be able to see a difference in the colour of your coins within about an hour.
Use vinegar or another acidic cleaner to clean calcium buildup from your toilet. The acid will break down the mineral deposits so you can brush them away. Be sure to take the necessary safety precautions when working with cleaners. Wear gloves and eyewear and open windows for ventilation.
While it can be put to a number of helpful uses around the home, WD 40 is particularly good at softening rust and limescale deposits in the toilet (and bathroom). All you have to do is spray it on the desired section of the toilet, wait a few minutes, then scrub it away with a toilet brush.
Added to this is the yellowish-brown urine scale: a chemical reaction occurs when urine comes into contact with limescale. The longer these deposits remain in your toilet, the thicker the layer of limescale and urine scale will be.
While vinegar and baking soda are touted as natural cleaning agents, excessive or frequent use may pose risks to pipes. To avoid potential damage, reach out to a drain cleaning company for drain cleaning instead.
Heat 2 or 4 liters of water on your stove or in a kettle to just short of boiling. Add about 1/2 cup of salt. Try pouring this down the drain, then wait 15 minutes before seeing if it will clear more easily. If you need a stronger cleaning, pour 1/2 cup of baking soda down the drain, then add 1/2 cup of vinegar.
Pouring boiling water is quite risky as it might lead to a steam burn or scalding. Another thing to keep in mind is what type of material you are pouring in into. If you have a porcelain sink, it is likely to crack due to the heat. All in all, pouring boiling water down your drain will only cause issues down the road.
The truth is, they're actually super easy to fix! Bleach only masks the problem—it doesn't get rid of it for good. Instead, try citric acid and a toilet pumice stone for a permanent solution. 🧽✨ Citric acid breaks down those mineral stains, and the pumice stone gently scrubs them away.
Baking Soda and White Vinegar
White vinegar is well reputed for its gentle cleaning properties. It can help clean, disinfect, and remove stains without damaging the surfaces. Combined with baking soda, the duo makes the best mixture to fight off the rust stains in the toilet caused by copper, molds and minerals.
Add a cup of white distilled vinegar to the tank once a month. Leave it to sit overnight and then flush it in the morning. Check for sediment buildup and staining every month or so. This may be especially important if you have hard water or if you have a toilet that doesn't get used very much.