There are three refrigerants that can be used to replace R-134a: R-1234yf, R-152a, and R-744.
A High-Performing Alternative to R-134a
Opteon™ XL10 (R-1234yf) refrigerant is a non-ozone depleting (ODP) hydrofluoroolefin (HFO) option that meets the industry's growing demands for sustainable, safe, and effective solutions.
R-1234yf refrigerant. To date, most auto manufacturers are using the hydro fluoro olefin (HFO) refrigerant R-1234yf as the replacement of choice for R134a.
Years later, R-134a was found to contribute to global warming, and now it too is being phased out . Enter R-1234yf. R-134a and R-1234yf do have many similar properties. That's because R-134a is a hydrofluorocarbon (HFC) while R-1234yf is a hydrofluoro-olefin (HFO) refrigerant.
If you're looking for a low global warming potential (GWP) alternative alternative, consider Opteon™ XP10 (R-513A)—a new generation hydrofluoroolefin (HFO) refrigerant replacement for R-134a in stationary equipment.
According to its manufacturer, Chemours, use of R-1234yf has grown so much since the refrigerant replaced the long-established R-134a that it's now used in 95% of new cars sold in the U.S. An estimated 220 million cars on global roads are also using it.
The cooling capacity of R1234yf used as a drop-in replacement in a R134a refrigerant facility is about 9% lower than that presented by R134a in the test range. This difference in the values of cooling capacity obtained with both refrigerants decreases when the condensing temperature increases and when an IHX is used.
Refrigerant types are not to be mixed. The usage of dyes and sealants is discouraged. Dyes and sealants are considered contaminants and will reduce the performance and longevity of the lubricant. Use refrigerant sniffers for leak detection and repair leaking equipment per SAE and EPA guidelines.
A Next-Generation R-134a Refrigerant Alternative
Opteon™ XP10 (R-513A) refrigerant is a non-ozone depleting potential (ODP), low global warming potential (GWP) hydrofluoroolefin (HFO) based replacement for R-134a.
The commonly used synthetic refrigerants such as R134a, R407C and R410A have a GWP value higher than 2,500. As a result, their production is being phased out.
R1234yf was chosen to replace R134a in all new cars by 2021. Some manufacturers have already made the switch, or the switch is in progress. In fact, as of 2018, 70% of new Kia cars already come equipped with R1234yf!
R32 and R152a have a reduced global warming potential than R134a, which indicates that R32 can be used as substitute for R134a in refrigeration systems.
The chemical stabilities of copper, steel, and aluminum have been tested and confirmed as acceptable for use with Freon™ 134a and lubricants. Acceptable plastics and elastomers have been found for use with existing CFC refrigerants.
Examples of Drop-In Refrigerants:
R437A and R438A: Replacements for R22 in refrigeration and air-conditioning systems. R449A or R448A: Alternatives to R404A, with significantly lower GWP. R513A: A replacement for R134a with low global warming potential (GWP)
To accommodate the industry R513A has been tested and approved by Tecumseh as a suitable replacement for R134a. While R513A is a viable option for new and existing equipment, it is not a "drop-in" replacement for R12 or R134a.
R-513A – also known as Opteon, it is a next generation non-ozone depleting, low global warming potential hydrofluoroolefin (HFO) that replaces R-134A. R-600 – an efficient natural refrigerant suitable for refrigeration applications. It is environmentally friendly and efficient.
Refrigerant R513A - Drop-In Alternative for R134a. R513A was developed as a replacement refrigerant for R134a. R513A is a modern, non-flammable refrigerant designed to replace R134a in a wide range of applications. It provides a sustainable solution for both new systems and retrofits.
The GWP for R-134a refrigerant is 1,430, making it 1,430 times more harmful than carbon dioxide when released into the atmosphere. There are three refrigerants that can be used to replace R-134a: R-1234yf, R-152a, and R-744.
As part of global efforts to reduce the environmental impact of refrigerants, R134a will be phased out by 2025 in favor of more eco-friendly alternatives like R290 and R1234yf12.
R-12 and R-134a are known to be very efficient at cooling but are not as energy efficient as 1234YF. Therefore, cars with 1234YF systems can have better fuel efficiency and emit fewer greenhouse gases.
No, the compressor will fail. These two refrigerants have very different properties. One of R22 and R134a is high pressure and the other is low pressure. They don't mix chemically and don't have the same boiling point, leading to inefficiencies and eventual compressor failure.
Most cars hold between 28 and 32 ounces of refrigerant (or about 2—3 12oz cans), however larger vehicles and those with rear A/C will likely hold more. Check your vehicle manual for the system capacity for your specific vehicle.
Still, the answer is an emphatic, “No.” Not only would a retrofit of this type negate the environmental benefits of R-1234yf, but it would also be a violation of Federal Law under Section 203 of the Clean Air Act: “tampering” with a vehicle's emissions control device.
With the scientific approach to reduce the global warming potential (GWP) of the refrigerant R-134A (i.e. 1430), the refrigerant R-513A with GWP of 631 is the drop-in replacement.
Why Is R-134A Being Phased Out? When Is the Phaseout Expected to Conclude? Like a lot of '90s relics, R-134A has not aged well. It was known then that 1,1,1,2-tetrafluoroethane could potentially contribute to acid rain and that its ozone layer depletion potential was high.