Optional: Scrub stubborn messes or stains with full strength Pine-Sol®, using a sponge or soft cloth. Step 3 Finish by rinsing with water and wipe kitchen cabinets dry. TIP: For safe, effective use, avoid using Pine-Sol® on unsealed, waxed, oiled or visibly worn wood.
Mix a cup of white vinegar with a cup of water. This mild cleaning solution is perfect for everyday use on wooden cabinets. It won't warp the wood or take off the finish. If you dislike cleaning with vinegar, you can use a light soap solution instead. Add 1/4 cup of distilled white vinegar.
A: We do not recommend using Pine-Sol® Original Multi-Surface Cleaner on aluminum, copper or marble surfaces. We also do not recommend using Pine-Sol® Cleaners on cars, on dishes or as a pet shampoo.
Q: Can Pine Sol be safely used on hardwood floors, including engineered hardwood? A: While Pine Sol is a popular household cleaner, using it on hardwood floors, especially engineered hardwood, may not be recommended as it can leave a residue that could potentially damage the finish over time.
Pine kitchen cabinets are a popular choice among homeowners, especially those interested in a more rustic or country kitchen design as well as a low-budget option.
Optional: Scrub stubborn messes or stains with full strength Pine-Sol®, using a sponge or soft cloth. Step 3 Finish by rinsing with water and wipe kitchen cabinets dry. TIP: For safe, effective use, avoid using Pine-Sol® on unsealed, waxed, oiled or visibly worn wood.
You can use commercial cleaners, like Murphy's Oil Soap, to clean cabinets. You can also make your own cleaners from ingredients in your kitchen that are eco-friendly, effective and affordable. Vinegar is the go-to natural cleaner when faced greasy cabinets.
If you use Pine Sol or Mr. Clean, you don't have to rinse. But you may want to take old towels, put one under each one of your feet and “dry” the floor with them afterwards. You'll be stunned how much dirt still comes up after you've wet mopped.
If you plan to use Pine-Sol, it's important to keep your cat away from surfaces until the Pine-Sol has dried completely. Stepping on wet Pine-Sol can irritate your cat's paws, and your cat can end up swallowing Pine-Sol if they try to lick their paws clean. Pine-Sol is safe after it has dried completely.
After cleaning with diluted Pine-Sol, make sure you rinse thoroughly. Using a damp mop with plain water after cleaning can help ensure no residue is left behind.
If you have a problem with wasps, hornets, yellow jackets, or bees, Pine Sol can spare you from painful stings. Remember not to use it on honey bees – we need them to help pollinate our food plants – but for other hive insects, spray full strength Pine Sol as an insecticide.
In 2022, certain Pine-Sol cleaners were recalled due to a potential health risk involving harmful bacteria.
CAUTION: Causes moderate eye irritation. Avoid contact with eyes, skin or clothing. Wash thoroughly with soap and water after handling and before eating, drinking, chewing gum, using tobacco or using the toilet.
Water (with a pH of 7) and dish soap (with a pH between 7 and 8) are always good options. The best cleaner, the one that is less likely to do damage to the wood is good old-fashioned elbow grease. Applied with a damp cloth, elbow grease should be effective at removing dirt and dust and even oil and grease build-up.
Some of the benefits and uses of Murphy's Oil Soap are: It smells fresh; it cleans without leaving a soapy residue as long as you do not use too much; cuts through grease that you may encounter on cabinets and paneling; great in luke warm water for wood floors (not laminate). I love, love, love Murphy's Oil Soap.
For those stubborn messes, apply a squirt of Dawn® Platinum directly to a sponge or dish cloth under warm running water, then gently scrub the greasy surface.
Effectiveness: Pine Sol contains pine oil, which is known for its strong scent. This scent can act as a deterrent for certain pests, such as ants, spiders, and cockroaches. However, it may not be as effective against all types of critters.
So fresh! Love love love the original Pine Sol, but this one is my favorite or the scented line! It has a very fresh and clean scent and doesn't leave my floors sticky after mopping them. The scent lasts for hours after using it and will fill your house after using it.
If you're feeling ambitious, you can even add a bit of vinegar to your laundry if you think the Pine Sol smell has gotten into your clothes or linens. Just add about a half cup to the rinse cycle. It'll help neutralize the smell.
Pine-Sol® is safe to use on wood floors, though it is not recommended for use on unfinished, unsealed, unpainted, waxed, oiled or worn wood.
Hot water is great for removing grease, stubborn dirt and caked-on residue. It is more effective in killing bacteria and germs. Hot water is a good choice for tile floors and vinyl. Be sure to check the manufacturer's instructions to make sure your floor is resistant to hot water.
When used in the wash Pine-Sol helps deodorize, and soften clothing, towels, etc. It is also ideal for grease stains. You can rub it on the stain, and add it to the wash in general.
The most common type of wood protector is a polyurethane varnish, which is basically like covering your wood cabinets in thin–but strong–plastic. You can put a poly varnish on floors, cabinets, and pretty much any wood piece that you want to protect.
Wipe the cabinets clean with a soft, damp cloth and dry immediately with another clean, soft cloth. Always wipe in the direction of the wood grain. Apply a thin coat of high-quality polish. Choose a polish that does not contain silicone or wax, and follow the manufacturer's directions for application.
Can disinfecting wipes be used on wood furniture? Household disinfecting wipes, such as Clorox or Lysol, are safe to use on most finished wood surfaces. You should always do a quick spot test and read the label before wiping down your chairs or tables. However, commonly treated or painted wood is likely safe.