Unfortunately, there is no known stabilizer for bromine that even approaches the effectiveness of cyanuric acid on chlorine, so it is best used in covered and indoor spas. Some spas are equipped with ozonators, which create ozone gas, an extremely powerful but very short-lived sanitizer and oxidizer.
The stabilizer used for chlorine-treated pools (cyanuric acid) is not effective with bromine treated pools.
Bromine does break down in sunlight, just as chlorine does, but cyanuric acid does not prevent this from happening. So bromine is used primarily in indoor pools and spas. Bromine is especially popular in spas because it remains stable at higher temperature levels than chlorine does.
Our bromine tablets are a mixture of 61% bromine, and 27% chlorine, but require no stabilization. However, it is generally accepted that when using bromine, one should increase the residual by a factor of two, or double the dose. This may lead you to think that you would use double the amount of bromine tablets.
For this reason, it is essential that all outdoor pools using cyanuric acid as a stabilizer maintain the required free chlorine residual of 2.0-10.0 parts per million (ppm). both chlorine and cyanuric acid so it is not necessary to add cyanuric acid to the pool water.
Areas exposed to high levels of sunlight should maintain 60 – 80 ppm (parts per million). Pools using an ORP Controller (Oxidation Reduction Potential) such as the AutoPilot Total Control, should maintain 30-50 ppm. Indoor pools do not need cyanuric acid, unless it gets periodic exposure to sunlight.
However, if you're a saltwater pool owner, you'll need to maintain higher CYA levels. The sun's UV rays are doubly harmful to saltwater pools, impacting both the salt itself and the chlorine generated from that salt. Saltwater pool manufacturers recommend keeping your cyanuric acid levels between 60 and 80 ppm.
How many bromine tablets should you put in your spa? Some bromine dispensers can hold up to 6 tablets, but in most cases you should start with just 1-2 to avoid your bromine levels climbing too high.
Cyanuric acid (CYA), also called stabilizer or conditioner, is used in pools and spas exposed to the sun to reduce the rate of decomposition of available chlorine by ultraviolet rays in sunlight. Stabilized forms of chlorine, such as dichlor and trichlor, contain CYA in their formulas.
Indoor hot tubs (sometimes called spas) don't need stabilizers unless they are positioned under a sunroof or in a room with large windows. And since sunlight affects the chlorine levels in the water, stabilizers are necessary to maintain the chlorine efficiency needed to keep it clean and user-friendly.
Is bromine OK for a hot tub? An alternative chlorine, bromine can be used to keep hot tub water clean. However, bromine works differently than chlorine and is not the best choice for use with mineral systems. Bromine breaks up the particles in the water by ionizing the water.
Hot tubs and spas are a popular stand-alone addition to a home or as part of a swimming pool upgrade. But maintaining clean water in a hot tub isn't entirely the same as in a pool. You have two main ways of killing bacteria and maintaining ph levels in your hot tub water. You can use chlorine or bromine tablets.
If you have an outdoor pool or hot tub or an indoor pool or hot tub in a room with windows, it's essential to use a stabilizer. The only time you would not need a stabilizer in your pool or hot tub is if it's indoors in a room with no windows like some hotels have.
Authorities say 4.0–6.0 ppm is the ideal concentration of bromine in spas.
Well-known member. It's virtually impossible to change a bromine pool to a chlorine pool. Without getting overly technical, the active form of chlorine, as soon as you add it, will find the inactive form of bromine, and make it active, becoming inactive itself in the process.
How to Raise Cyanuric Acid. Cyanuric acid levels are raised by adding pool stabilizer. It's called stabilizer because cyanuric acid stabilizes free chlorine from being evaporated by the sun.
In the pool industry, Cyanuric Acid is known as chlorine stabilizer or pool conditioner. Many solid chlorinating products, like granules or tablets, are developed to include CYA. These multifunctional products reduce the number of steps pool owners need to take to maintain their swimming pools.
As long as you follow the manufacturer's instructions for both the hot tub and the bromine, you can use bromine regularly for treating and sanitizing your spa. However, it may be wise to use bromine granules instead of bromine tablets. This will lessen your direct interaction with the chemicals.
The tablets are placed in a floating dispenser such as this, or in the skimmer basket, or if the hot tub does have a tablet feeder, they can go in there. It's important to note that you do not want to mix chlorine and bromine tablets in the same feeder, basket, or dispenser.
You could also crush up 5 or 6 bromine tablets in a heavy plastic bag and pour that in the hot tub to raise bromide levels but it's easier and safer to shake in a capful or two of our Bromine Booster.
Pump / Filter Status – After adding your cyanuric acid, keep the pump running for at least 8 hours for the cyanuric acid to fully circulate around your pool. Do not clean or backwash your filters for at least 48 hours to allow the cyanuric acid to be fully dissolved.
Yes both cyanuric acid and muriatic acid are both acids but they serve different purposes for the pool owner. Cyanuric acid has the chemical formula CNOH, whereas muriatic acid is a diluted form of hydrochloric acid, HCI.
Answer: Cyanuric acid shouldn't be at Zero for an outdoor swimming pool because chlorine will deplete faster in hot and humid weather, leading to cloudy water. If your FC is at normal level of 3ppm, raise Cyanuric acid level to 40 ppm and you will reduce chloramine levels that make your water appear cloudy.