Many homeowners ask if Magic Erasers® can be used on porcelain or if they will damage ceramic tile. The good news is that they can be safely used on ceramic tiles and porcelain, so you have nothing to worry about if you plan on using them this way.
For stains, use white vinegar and water: Add white vinegar (¼ cup) to two gallons of warm water. Use the solution to mop the stained, glazed porcelain tiles. Vinegar cleans, disinfects, and deodorizes floors. After mopping, allow the solution to sit for 5 to 10 minutes, and then rinse off the solution.
I washed my porcelain tile floor with Mr Clean multipurpose floor cleaner to remove sticky residue from an exploded soda can.
Porcelain tiles tend to be harder, more resilient and more stain-resistant than ceramic tiles. They are one of the easiest types of tile to maintain but their surface can eventually be eroded by the regular use of corrosive chemicals such as ammonia, bleach or acids that can also damage the grout and loosen the tiles.
Don't Use Them On Your Car
Or any other delicate surface, for that matter, like silverware, glass, or metal surfaces. Dry erasers have the abrasiveness of a 3000 grit sandpaper – very fine, but can still mar shiny surfaces – like your stainless steel appliances!
So, when you start noticing dirty feet, you know it's time to call on Mr. Clean®. His best way to clean ceramic tile, especially when dirt gets stuck in hard-to-reach places, is with the Mr. Clean Magic Eraser Extra Durable.
Before you retire to the couch, rinse out your Magic Eraser and give your newly freshened surfaces a water wipe down, too. If what you cleaned will come in contact with food, you'll need to wipe it with a wet rag or paper towel, so it will be ready for the next time you meet again.
Avoid oil- and wax-based cleaners and never use a solution containing acids, ammonia, or bleach on your glazed porcelain tiles. These products can alter the color of the tile and eat away the grout.
For stubborn stains use a non-abrasive cleaning product, sugar soap or normal house cleaning products. Do not use cleaners that have strong alkaline pH levels and thoroughly rinse the surface with clean water to remove residue.
Swiffer wet cloths are designed to be used on most floor surfaces, such as: vinyl. porcelain tiles. ceramic tiles.
Many homeowners ask if Magic Erasers® can be used on porcelain or if they will damage ceramic tile. The good news is that they can be safely used on ceramic tiles and porcelain, so you have nothing to worry about if you plan on using them this way.
For most types of tile, including porcelain and ceramic, you only need two ingredients—warm water and dish soap. In a spray bottle, combine warm water with a few drops of dish soap. Spray the water and dish soap solution on the tile surface. Wipe the area with a damp microfiber towel or cloth.
Windex can also be used to clean tiles and grout, without causing any damage.
Clean porcelain tile floors using a ratio of 1 gallon of warm water to ¼ cup of vinegar. Vinegar will help to lift tough stains and mosses from the floor. You can use a mop, a sponge, or a non-metallic brush to do this.
Then, follow these steps to get ceramic and glazed porcelain tiles and grout thoroughly clean: Step 1 Add ⅛ cup of Pine-Sol® Multi-Surface Cleaner to a bucket containing a gallon of water. Step 2 Wet a cloth or chamois mop in the mixture. Step 3 Wipe down the tile floors thoroughly.
For white porcelain only, bleach can be used to remove stains; never use chlorine bleach in colored or vintage porcelain, as it can damage the finish. For both white and colored porcelain, liquid oxygen bleach (such as hydrogen peroxide) is a good alternative.
Too often floors are cleaned with a mop and they don't change their water frequent enough nor do they rinse the floor properly. This results in dirty water evaporating on the surface of the tile leaving a dirty residue in the low spots of the tile.
For the best clean, you can use either a specialized tile cleaner or a mixture of water and white vinegar. Generously spray the solution on walls, floor and fixtures, focusing on areas with soap scum, mildew or hard water stains. For tougher grime, make a paste of baking soda and water.
Create a solution by mixing equal parts water and vinegar, then apply it to the stained area. Let the solution work its magic for a few minutes before gently scrubbing and rinsing. Remember, patience is your ally. Allow the water-vinegar solution to sit on the stain for a bit before you unleash your scrubbing prowess.
Although porcelain tiles offer exceptional durability, there are few products and techniques you should avoid at all costs. Never use a product that contains harmful chemicals such as ammonia or bleach (or any type of acid-based cleanser). These type of chemicals can alter the colour of the tiles and/or the grout.
On average, porcelain tile can last 50 years or more when properly installed and maintained. In some cases, especially with premium-grade porcelain tiles, the lifespan can extend beyond a century, making it one of the longest-lasting flooring and wall materials available.
For porcelain sinks in both the kitchen and bathroom, a magic eraser is a great tool to have on hand.
Are Magic Erasers Safe? In short, yes. While the compound ingredient mentioned above does contain the word formaldehyde, it's part of a chemical name. Formaldehyde itself is not an actual ingredient in the sponges.