Combine about 45 grams of baking soda with about a liter of water and mix well in a medium-sized bowl. Use a clean cloth to apply the mixture to the surface. Allow the paste to dry for about 5 hours, then use a microfiber cloth and warm water to rinse. Dry buff with a clean microfiber or chamois cloth.
White vinegar spritzed onto the tile will do a great job if you let it work for about 30 minutes and then scrub and rinse. Yes, there may be a slight odor, but your pebble-stone shower floor will look good for years.
Spray your pebbles with white vinegar and let sit for about 10 minutes. Then, simply scrub and rinse. Pebble floors can look daunting at first glance, but with relative ease, you can keep yours looking amazing for decades to come.
Clean with a microfiber towel or nylon pad.
To avoid detrimental scratches, clean tile and stone with softer sponges. Nylon, microfiber, and soft brushes will help clean stone without damaging its sealant. You can also keep a microfiber towel near the shower to easily soak-up and remove excess water after each use.
Not all types of scrubbing bubbles are suitable for cleaning pebble floors, which is why before using you need to make sure that you get the right kind of scrubbing bubbles to clean the floor and in no way harm the stones and the shower stall in general.
Natural stone should be cleaned once a week with a pH-neutral cleaning product like Simple Green All-Purpose Cleaner. The powerful cleaner dissolves tough soils and buildup without damaging your beautiful stone surfaces, and removes soap scum, body oils and greases, bath oils, soap, and shampoo oils.
Products that should never be used on these types of stones include vinegar, Scrubbing Bubbles, Tilex, Comet, etc.
Apply a paste of baking soda and water over the stain and leave it for 24 hours. Gently scrub the area and rinse it with plain water. Stains on Sandstone pavers, Travertine floor tiles, and Marble floors can easily be cleaned with a baking soda solution.
While all natural stone, including flooring, should be sealed regularly, it is even more important to keep a strong seal on natural stone that lines the interior of a shower. The maximum amount of time homeowners should wait between sealing their natural stone surfaces is a year.
The simplest answer is no, it is best to avoid bleach when cleaning any type of natural stone. Many home cleaning products, particularly bleach and vinegar, are too harsh or acidic to be on natural stone. These cleaners strip down the stone and leave it in a weak, damaged state.
This salt deposit is called efflorescence. Normally, these residues can be washed away with a very mild acid solution and a bristle brush while being careful not to harm the stone (always test first to be certain the acid will not alter the existing finish).
Granite is easier to care for compared to marble and other natural stone because of its resistance to ingredients found in hygiene products. Because granite is a popular choice for bath countertops, homeowners tend to select it for the shower as well for a uniform look. Onyx is a banded stone similar to agate.
Clean stone surfaces with warm water and a mild soap such as a clear Dawn Liquid Soap. Do not use products that contain lemon, vinegar or other acids on marble or limestone. Rinse the surface thoroughly after washing with the soap solution and dry with a soft cloth. Change the rinse water frequently.
If you have natural stone tiles anywhere in your house, avoid cleaning them with vinegar, lemon, or ammonia. The acidity in the products etches and dulls the stone, says Elena Ledoux, owner of Superb Maids in Las Vegas, Nevada. To repair, it will require a very expensive re-polishing process.
Magic Erasers are bad for natural stone surfaces
Magic Erasers will damage your natural stone countertop or even your floor. If you have polished marble or granite countertops, or even natural stone tile, don't use a Magic Eraser to clean it, according to Countertop Specialty.
Acidic commercial cleaners and those containing harsh chemicals, like bleach, can damage and dull natural stone surfaces.
DON'T: Use harsh or abrasive cleaners and sponges.
Windex; acidic cleaners, like vinegar, lemon, lime; or anything with ammonia or bleach should be avoided. Frequent use of these chemicals will dull and weaken the sealant over time.
And in this case, this mixture does not work well with the natural stone countertops. Due to the fact that vinegar is acidic substance and baking soda is caustic, the result of mixing the two can have an unstable effect on stones that are porous.
The automatic shower cleaner was likely discontinued because of manufacturing defects. Unfortunately, it's a real challenge to create a cleaning product that sits in the shower, holds and sprays liquid, and that is waterproof to protect its electronics and battery. There's just too much humidity in a typical bathroom.
Water, Dish Soap, And White Vinegar Shower Spray
The next DIY daily shower spray you can make at home is a mixture of water, dish soap, and vinegar. This is a slightly stronger shower cleaner than the spray above and is recommended for families of four and people whose showers are used more than twice a day.