There are safe ways to attempt to remove these stains. Try mixing baking soda with water to form a paste and rub it into the tiles. Allow the thick paste to sit on the tile for 15 minutes before cleaning it off. Never use harsh cleaners or take drastic measures in an attempt to remove stains from travertine tile.
Avoid citrus or vinegar cleaning agents
Both these elements will cause the Travertine surface to dull. Acidic substances like lemon, orange peels, baking soda, vinegar slowly may penetrate the surface to cause irreparable damage.
What is this? To remove the mold on travertine tiles. Use 1- part baking soda to 4 parts borax and 8 parts water, mix in a spray bottle, spray onto your travertine tiles, then allow to work for 15 minutes.
Organic stains, such as those caused by coffee, juice, urine, and food, turn the travertine pink or brown. Remove these stains with a mixture of 12% hydrogen peroxide—food grade hydrogen peroxide—and a few drops of ammonia. Apply the product to the stone on a damp cloth.
If you are deep cleaning travertine, then you can use a strong alkali cleaner, but you must remember to rinse the floor well to remove all traces of the cleaner. If you are undertaking regular maintenance clean, then use a ph Neutral cleaner, preferably containing a small amount of stone soap or linseed oil.
To kill off mold and mildew and keep your investment looking its best, travertine can be cleaned with a peroxide-based product like Oxiclean, which will not harm the polish on your travertine. Remember, hydrogen peroxide can bleach fabric, so, like bleach, watch your clothes and linens.
Consider purchasing a floor cleaner formulated for travertine to use regularly. The label should clearly state if the cleanser is formulated specifically for travertine. Opt for a cleanser with a neutral pH of 7 or below. You can also use mild dish soap to clean travertine floors 3-4 times per year.
Baking soda, which is a bit abrasive in nature, can effectively loosen up the dirt particles without causing any damage to the tile surface or the indoor air quality.
What you'll need. Before choosing cleaning products for travertine floors, keep in mind that the stone generally does best with products that are pH neutral. Acids like vinegar, lemon, or other harsh chemicals like bleach can react badly with the stone and cause discoloration and permanent damage.
You can use a mild dish soap and water if natural stone cleaner is not available. Take caution to never soak the floor. This would allow water to seep into the stone and could result in stains. Use a soft dust mop and microfiber rag for cleaning.
What leads to a degraded quality of travertine tile? Most often, the culprits would be scratches, spills, and cleaning products. Your best defense to retain a beautiful travertine floor is frequent dust mopping.
Mopping: Dry 'mop' your travertine floors with a clean, dry dust mop to remove daily dirt, dust, and debris. Next, if needed, use a soft mop, with warm water to clean the travertine. If needed, you can also use a travertine specific floor cleaner.
Baking soda is known as a stain remover. It can help to remove liquid stains such as tea, wine or coffee. It also helps to remove the unpleasant smells. It is quite affective on solid surfaces in general but it is not advised to use baking soda directly on natural stone surfaces.
Baking soda is efficient enough to clean the bathroom tiles on its own. Its ingredients are powerful enough to eradicate dirt and stains on the tiles. Apply baking soda on the tiles and leave it alone for a few minutes. After that, all you need to do is clean the tiles.
Travertine will absorb harsh chemicals, which again will damage the stone. Do not use products like MR Clean, dish soap, Windex, or anything like these products. These products leave a residue on top of the travertine tiles, collecting and attracting dust and dirt.
Equally, make sure the stuff doesn't remain on the surface for more than a few seconds. If you use it too often, your marble could end up looking rather dull. Even light abrasives like baking soda can still damage stone surfaces.
Baking soda is a safe deodorizer, whitener, and household cleaner—and it's an effective natural grout cleaner. Because baking soda is also a mild abrasive, using it for cleaning grout lines gives you extra firepower without the risk of scratching your tile.
Let the product sit for 30 minutes. Then, go back in and scrub gently with water. (Our Test Kitchen loves the Scrub Mommy scrubber for all kinds of cleanup tasks.) You'll watch the dirt melt right off the tile and grout.
Simple Green Stone Cleaner is perfect for regular use on marble, granite, quartz, travertine, porcelain, limestone, ceramic, porcelain, Corian®, Silestone®, and other engineered stone.
To kill off mold and mildew and keep your investment looking its best, travertine can be cleaned with a peroxide-based product like Oxiclean, which will not harm the polish on your travertine. Remember, hydrogen peroxide can bleach fabric, so, like bleach, watch your clothes and linens.
We've said it before (and we'll say it again) DO NOT use Murphy's Oil Soap on any natural stone surface. Following our 20 years experience and the Marble Institute of America's Maintenance Guidelines, we recommend a neutral PH rinseless stone soap, used with an unbleached clean nylon pad to clean stone.
Certain products cannot be used on certain stones as they are too harsh or acidic and can cause etching on stones such as marble, travertine, and limestone. Products that should never be used on these types of stones include vinegar, Scrubbing Bubbles, Tilex, Comet, etc.
You should seal travertine during the installation process. You'll need to reapply the sealer periodically. How often you need to reapply the sealer depends on the type of sealer as well as how much usage and traffic the travertine gets. Resealing every one to three years is typical.
SAFE: Water. Granite and/or Natural Stone-specific products. Water and rubbing alcohol mix 16:1 (a.k.a. 1-quart water to 1/4 cup rubbing alcohol)