Accidents Happen – When playing in or around a pool, accidents happen all the time. Having a set of lights fall into the pool and potentially injure someone is a risk you should avoid. Why even create the potential for an accident. Don't install string lights over the pool.
You can get electrocuted by a pool light in a swimming pool. It can cause serious injury and even death. An experienced electrocution lawyer can help victims and families recover the pain and suffering compensation or wrongful death damages they are entitled to under the law.
Above ground pool lighting can shed just as much light into the water as lights placed below the surface, but they don't need to be able to survive being underwater or require special maintenance.
Low-voltage lighting systems are not permitted to be installed within 10 feet of the nearest edge of the water for a pool, spa or fountain, unless otherwise permitted by Article 680. With the acceptance of new text in 680.22(B)(6) of the 2014 NEC, many of these installations will now be compliant.
While solar lights can be used to light your pool, solar powered lights should not be placed in the water of the pool unless specifically designed for full immersion. IP68 is the IP certification for full submersion for any light fixture regardless of it's energy source.
Can you get electrocuted by solar lights? There is almost no risk of getting electrocuted by solar lights. Most solar lighting is weatherproof, so the wires are insulated to prevent water from getting in. The current used by most solar-powered lighting isn't high enough to reach a lethal threshold.
Place lights at a uniform depth, between 9-12 inches below the waterline, throughout the pool. Possible exceptions would be if the lights need to be placed on a step or bench or extremely deep pools (see Pro Tip). Lights should be positioned 4 inches beneath the waterline.
Always try to have the lights point away from the house. By doing this you will avoid the headlight effect of the lights shining in your face. If you build a spa with your pool you will want a light in it also.
Pool lights should be placed at mid-height, almost at the surface of the water. For practical reasons, this will make changing the lighting equipment easier. This position in the structure will give you the best effect, rendering well-lit contours and highlighting the depth.
LIGHT TYPES - Pool lights come in three types: INCANDESCENT, HALEGON, and LED. The older style INCANDESCENT lights have light bulbs much like the standard bulbs used in your house before we went the newer more cost efficient CFL (Compact Fluorescent Light) bulbs.
An LED light will save you roughly 75% on your energy usage compared to a comparable incandescent light. REMEMBER, that LED pool lights cost more, on average, than a simple incandescent light so your cost savings will not start till you recoup the additional money that you spent on the LED lights.
Water inside the Pool Light? If there is water inside the lens of the pool light, which you can usually see from on-deck, that doesn't mean that the light is leaking, but it does mean that the lamp gasket has failed, letting water leak inside and surround the bulb.
When wired and serviced in accordance with the NEC (National Electric Code), 120V lights have been, and will continue to be safe.
Typically, backyard swimming pools are equipped with 1 or more underwater lights. Just like any light, the bulb can burn out and will need to be replaced. There is no need to lower the water level in your pool to replace the burned-out bulb.
How many lights do I need? It depends on the type of light, but we currently use the smaller LED lights like the Globright or the Pal 2000 in our fiberglass pools and suggest that one light, at a minimum, will adequately illuminate a pool up to 30' long. Pools longer than 30' will require two lights.
Pool lights are worth it because they provide the necessary lighting for a pool especially during the night, which prevents accidents because you can see every area of your pool. Moreover, they are considered a necessity most especially if you want to get maximum usage out of your pool.
Do not operate the light for more than 1-2 seconds without it being fully submerged. The light requires submersion to prevent overheating, and if operated without water covering the lens, the lens will shatter in under a minute.
1: Do LED Lights Really Last 80,000 Hours as Promised? All the marketing hype would have you believe that your new LED light will last for 50,000 to 100,000 hours (up to 12 years). This is a half-truth really. Yes the LEDs themselves will normally last that long.
1. Wet LED Strip Light Can Result In Electrocution. When your led strip light gets wet one of the first and common things that is bound to happen is it could cause an electrical shock or electrocution.
As this is being written, a full sized LED pool light usually cost between $450 and $650 installed. If you go for the smaller LED lights you're looking at $300 to $500 installed. When you have full-size incandescent pool lights they are in the range of $450 to $650.
It costs a lot of money to have sales people to go to all the different pool store chains that must be covered in the bulb price. You aren't paying for a better bulb, you are paying for expensive overhead and multiple mouths to feed when each bulb is sold.
The Most Energy-Efficient Lighting Available
Since there is no filament, an LED does not heat up the way an incandescent bulb does, which wastes up to 80% of the electricity routed to it to produce heat rather than light.