The answer is that it usually takes up to 30 minutes to get a half inch of water. Watering 3 times per week equals to an inch of water on a lawn. Plants can be watered 1 to 2 times a week in seasons where there is a higher chance of rainfall and less evaporation.
The average system uses approximately 15-16 gallons per minute, per station.
Watering with a typical sprinkler using a standard 5/8" garden hose for one hour uses about 1,020 gallons of water; if you water three times per week, that's about 12,240 gallons per month.
To determine how long you need to water to get one inch, place a plastic container in your yard and set a timer. On average, it will take 30 minutes to get a half inch of water. So, 20 minutes, three times per week will give a lawn about an inch of water. This formula works best with healthy, well-cultivated soil.
Normally each sprinkler head can deliver anywhere from I to 6 gallons per minute. A typical residential water meter can deliver 30 gallons per minute. With this in mind; 5 sprinkler heads can use 30 gal/min.
The average usage of water in a residential sprinkler system is between 12 – 30 gallons per minute depending on the type and size of the sprinkler head.
The answer is that it usually takes up to 30 minutes to get a half inch of water. Watering 3 times per week equals to an inch of water on a lawn. Plants can be watered 1 to 2 times a week in seasons where there is a higher chance of rainfall and less evaporation.
For conventional sprayheads, precipitation rates typically range from 1.3 inches to 2 inches per hour. For gear drive rotors, precipitation rates typically range from 0.4 inch to 1 inch per hour. For rotary nozzles, precipitation rates typically range from 0.4 inch to 0.6 inch per hour.
One inch of water or rain is equivalent to 623 gallons per 1,000 square feet.
To calculate the amount of water you use, multiply the width times the length of your yard in feet to get the number of square feet of area. Then multiply that figure by 0.623 to come up with the number of gallons used (or use our calculator below).
If your sprinkler output is 1½ inches per week, your sprinklers should run for only ⅓ hour or 20 minutes that week (½ divided by 1½). On a twice-weekly watering schedule, run your sprinklers 10 minutes each time.
Sprinklers generally cover up wider ground and spread out water at a slow yet steady pace, which makes all the soil moisturized evenly and soaked underground. A watering hose takes time to cover space and can clutter the soil if there's too much water.
In general, your lawn needs 2 to 3 cm of water per week, so a good average is to water about 2 times a week, or even 3 in the warmer months. You can then adjust the watering frequency according to the age of your lawn. For example, if your lawn is several years old, one watering per week is sufficient.
That will give the actual gallons used for 10 minutes, divide by 10 to get the gallons per minute or gpm. [On average a pop-up station uses approximately 15 to 16 gpm.]
Water Wisely
Many of us water too often and too long. Most lawns need to be watered no more than three days a week in the spring as well as in the summer and two days a week in the fall. This watering schedule is recommended under normal water supply conditions.
How Long Should I Water at a Time? A watering session should be long enough to soak the area sufficiently so all the roots receive a beneficial drink. Sprinklers should be set to run for about 30 to 35 minutes at a time twice a week.
Nothing should be in that area between the bottom of the sprinkler heads and the imaginary horizontal plane parallel to the ceiling that is 18 inches below. This is done to allow an even and unobstructed spray pattern from the sprinklers when triggered to extinguish the fire.
People water too much, too often, at the wrong times, and the wrong way. Not only does this waste a valuable and increasingly scarce resource, it also makes your lawn look worse by increasing disease, insect, and thatch problems.
How Much Water to Use. When watering an established lawn, it's typically recommended to water until the top 6 to 8 inches of soil (where most turfgrass roots grow) is wet. Most lawns need 1 to 1.5 inches of water per week—either from rain or watering—to soak the soil that deeply.
Install sensors to shut off irrigation systems if it starts raining. Modify sprinkler patterns to match the lawn, garden, or decorative shrubs, and eliminate watering the driveway, parking, or pavement. Raise sprinkler heads that are blocked by shrubs or other foliage.