While it may seem more convenient to keep the AC running 24/7, doing so will consume more energy overall and lead to higher electricity bills. The most cost-effective approach is to turn the AC off or raise the temperature setting when you're away from home or sleeping.
According to some sources, it is cheaper to adjust the temperature of your AC rather than turning it off completely when you're not home. This is because turning off your AC can cause your home to heat up more than it can store, and then your AC will have to work harder to cool it down when you turn it on again.
According to the Department of Energy1, 78° Fahrenheit is the sweet spot for air conditioners to balance energy savings and comfort when people are at home and need cooling.
Increase the thermostat
If you are just as comfortable with your thermostat one or two degrees higher than you currently have it set, go ahead and turn it up. Even a one degree difference will have an impact on your energy bill. Many recommend 78 degrees as a good temperature for air conditioners to run efficiently.
Running a home air conditioner 24/7/365 can put a strain on the unit and potentially lead to increased wear and tear. This constant operation may result in higher energy bills and could shorten the lifespan of the equipment.
The short answer is yes, it's more cost-effective to keep your air conditioner on all day. However, don't take this as a green light to crank it up to the max 24/7! There's a smart way to go about it, which we'll delve into in a moment. So, why is it cheaper to leave your AC on?
Best AC Temperature Settings While You Are Home
As you consider the most comfortable room temperature for your lifestyle and family, keep in mind that for each degree that you set your thermostat above 72 degrees, you can save up to 3% on your energy bill.
Although many people believe that it is more costly to turn your AC on and off vs. leaving it on, this is entirely false. People often base this belief on the idea that powering on your system requires a burst of energy, so leaving it running would minimize energy usage by reducing these bursts.
Running the AC unit full-time in our big house example would cost $7.39 per day for the efficient unit, or about $222 per month. For the less efficient unit, you're looking at $10.56 per day or about $317 per month. Not only that, but running all day is hard on your air conditioner.
This is more of a personal question, as different people feel comfortable at different temperatures. Since 72 degrees is generally agreed upon to be an ideal indoor temperature, most people would probably still feel comfortable setting their AC units slightly higher than this, perhaps at around 75.
Quick answer: The ideal house temperature is room temperature, which ranges from 68 to 78 degrees F, though this may vary from season to season. In winter, the average room temperature is generally 62 to 68 degrees, whereas in the summer, the average temperature is 72 to 78 degrees.
Keeping a Reasonable Temperature: One will use 3 to 5 per cent less energy for each degree air conditioner is set above 25 degrees C to provide the most comfort at the least cost. Keeping ACs at (24–26 degrees C) can save electricity.
AUTO is significantly more energy efficient between the two modes since the fan is only running when your AC is going through its cooling cycle. This takes less power, which is more budget-friendly, with some estimates showing you can save as much as $50 per month just by keeping your AC on AUTO.
If the temperature is set to 74°F but the thermometer shows 78°F, you will have to recalibrate the thermostat to account for this 4-degree deviation. Even with older AC units or furnaces, you might have to recalibrate your thermostat from time to time.
According to the U.S. Department of Energy, you'll want to keep your thermostat set to 78 degrees. It's considered the ideal “magic number,” the one that saves you the most money throughout the season.
On an average summer day, a general guideline is that your AC should operate between 12 and 16 hours. However, several factors can influence this, including the outdoor temperature, desired indoor temperature, the size and type of your unit, and your home's energy efficiency.
Your air conditioning system is one of the biggest culprits behind skyrocketing electric bills. When your air filter is dirty, refrigerant levels are low, your thermostat is faulty or you lack proper maintenance, your A/C system can end up using a lot more energy than it should.
Is It More Energy-Efficient To Leave AC On? While you may initially think turning the air conditioning on and off will save energy and money, this is not the case because it will ultimately cause damage to the system and increase the amount of work for the HVAC system to keep your house cool.
Eco or energy-saving mode
This is the ideal mode for users looking to save up on energy bills by toning down the performance of the AC and its compressor. Eco-mode uses less electricity by automatically adjusting the fan speed and temperature, while still maintaining a comfortable level of cooling.
One great way to lower energy costs is to avoid cooling an empty house. This is especially true during the middle of the day. If everyone in your household is either at work or school, then turning the temperature to 78-80 degrees will save you a chunk of change when the energy bill arrives.
While ENERGY STAR suggests 82 degrees, that may be too uncomfortable for most families. Most people sleep better when their sleeping area is chilly, so that's why the National Sleep Foundation advises 60–67 degrees.
For many of us, 70 degrees is the ideal indoor temperature, but when it is close to 100 degrees outside, your AC unit will be working quite hard to meet these expectations. Consider setting your thermostat at 75 degrees to 80 degrees in your home if the outside temperature is approaching triple digits.