The answer to the question is, “do the floors first!” Here's why: Removing and replacing flooring or carpeting is dirty work. If you paint first, and then do floors, there is a good chance that a lot of dirt, dust, sawdust or tile/stone dust will end up on your freshly painted walls and trim.
Most people think that painting should be done first to prevent any spills from marring brand-new flooring. However, experts agree that new flooring should always be installed before you have any interior painting done.
Assuming that you are getting the work done professionally, it is usually better to do most of the painting AFTER the flooring and most of the prep work BEFORE the flooring. The ideal is to first do any prep work to the walls – e.g.ripping up wall paper, sanding and patching walls, etc.
Painting Walls Before Refinishing or Laying Floors
For subfloors (prior to floor covering), almost any kind of paint drips are fine as they will be covered over. Painting activity and tools that damage flooring can be sanded out.
Masking tapes prevent your skirting boards, beadings, walls, doors, door frames and fireplaces from being damaged, scratched or stained while our experts are sanding, staining and finishing the wood flooring. The standard masking tape usually used for these purposes is made of paper.
We recommend painting once all major structural and functional work is done, but before new flooring or carpet is installed. Essentially, floors come last so you can avoid the heavier wear and tear multiple contractors, tools and dust the full renovation brings.
Many experts say that it's wise to paint the trim before you install it. It's a fast and easy process that can dramatically speed up paint time. People who paint trim before installing tend to place the boards on sawhorses over a drop cloth to work.
This is why experts agree that choosing to remodel your kitchen or bathroom first is traditionally the smartest move. And while kitchens typically cost more to remodel than bathrooms, they tend to yield a better return on investment, so they end up paying for themselves over the long run.
After vacuuming, wipe all surfaces with a damp cloth to remove the remaining dust. Again, start at the top and work your way down.To easily remove dust from walls, moisten a soft towel with water and wrap it around the bottom of a broom. Secure with tape if necessary. An alternative is to use a flat sponge mop.
Dustless hardwood floor sanding is a popular request from homeowners. It's more efficient than regular sanding and it's healthier because it helps you maintain the indoor air quality. It also requires less cleanup.
Do expect dust
Yes, when you are sanding the floors, dust is created. That is just part of the process and there is no way around it. However, there are some ways to minimize it. We always put plastic around the areas not being done, and our machines are good at collecting a lot of the dust.
As a general rule, we recommend leaving your base and shoe on when having your floors refinished, especially if it is painted. Depending on how the painters prepped your base, you can actually cause more damage to the base and walls by removing it.
If your hardwood floors have been sanded and finished with Bona Mega Clear HD, it is safe to sleep in the home about 2-3 hours after the project is finished, but again, only if there are other rooms that have not been robbed of their furniture – furniture should stay off floors for at least 24 hours after ANY project ...
Typically, 24 hours after the last coat is applied your floors should be dry enough to walk on and place furniture on. Even though the floors are dry, it will take the finish about 21 days to fully cure. Wait at least 10 days before you place any area rugs down.
Dustless floor refinishing involves the use of a hardwood sander to strip the old finishing off the floor, thus removing flaws in the finish and exposing the bare wood of your floor. This process of refinishing usually kicks up dust particles that can be harmful to your lungs and your belongings.
Whether you have traditional hardwoods, prefinished wood, or laminated wood, restoring without sanding is a practical solution. Though you can sand your traditional hardwoods, it's difficult or even impossible to sand prefinished or laminated wood floors.
We have a five year warranty that our finish will not peel, crack, chip, or yellow! There are many variables that go into determining durability, but with proper care, a floor finished by Mr. Sandless will last for many years.
How long do I have to wait to use my room after my floors are refinished? We recommend waiting 6 hours before walking on your new floors in socks. After 24 hours you can walk through with shoes on.
At a minimum, you should wait at least 24 hrs before walking on the floors; for hours 24-48, it's best to wear socks only (no shoes, no bare feet). Ideally, you should wait a total of 4 days before moving furniture back.
Sanding produces a fine, white dust throughout the room. It is important to perform drywall cleaning after sanding to remove the dust before painting. Otherwise, it may interfere with paint adhesion. Additionally, the sooner you remove this dust, the less chance it has of spreading throughout the house.