Lowered home air quality “If the return air vent is blocked, the furnace is going to try and pull air from anywhere that it can,” Ryan says. If you have any sort of gap in your ductwork, the system will pull from these places instead, carrying contaminants into your home and reducing air quality.
In the heating cycle, blocked cold air returns can cause the heat exchanger inside the blower compartment to store too much heat and eventually crack. If the cracks are too large, the furnace can emit carbon monoxide into your home's air. Such a condition normally requires a complete system replacement.
While you should have a filter on your air return vent to prevent too much dust or moisture from entering your air system and recirculating back to you, you should never actually cover a return air vent. Keep furniture and even curtains at least 10” away from the vent opening in order to allow for proper air flow.
Return vents are usually larger than supply vents and are in large rooms in the home. The return vents in your home help equalize the pressure that changes as your HVAC system heats or cools your home. These vents should never be fully closed because closing them off restricts airflow and strains the system.
Closing the vents doesn't do it any favors. In fact, instead of helping the air conditioner cool less, closed registers force the same amount of air through other ducts. This builds pressure in the system and makes your HVAC system work harder to distribute the air where you need it.
Hot air rises and cool air sinks. Therefore, opening the right return vents in the summer and winter significantly improves the distribution of air by your forced-air system. You'll also enjoy more even heating and cooling throughout your home. In the summer, open your high returns and close the low ones.
When air can not move effectively, a pressure buildup can get created inside your air ducts and also your HVAC device. This will inevitably produce less airflow as well as cause your heat exchanger to split which will certainly enable carbon monoxide gas to leak into your residence. You might create mold and mildew.
Closing air vents can lead to several different issues in your home: It can cause leaks in the HVAC system or make existing leaks worse. It can make your HVAC system less efficient rather than saving energy. Pressure can damage your heat exchanger, resulting in dangerous carbon monoxide leaks.
If they are too small, airflow will be restricted and there will not be enough air circulation to heat or cool the inside of your home. Return air ducts must be sealed and unobstructed — Sealing return air ducts is just as important as sealing supply ducts.
Parts of Your Home Are Hotter or Colder
If there's not enough return air, your living room can be 10℉+ warmer or cooler than, for example, the bedrooms.
Instead, there should be at least one return vent in every room, with two or three being ideal. If your house has only one return vent, this is not a problem — make sure to keep the doors open in every room so the air can circulate properly. Make sure there are no furniture, draperies, rugs, etc. blocking return vents.
Symptoms include weak airflow and uneven cooling or heating throughout your home, with some rooms feeling much cooler or warmer than others. Homeowners should regularly check vents for consistent airflow. If you notice a significant drop in air pressure or uneven temperatures, it could indicate return air issues.
Restrictive vents or grills: A vent that isn't the right size or shape can make a ton of unwanted noise. Some vents aren't made very well and have very narrow openings for air to enter or have vents that fall closed easily, which means that the HVAC system or furnace has to work super hard to get enough return air.
You should never close your return vents on purpose, but it can happen accidentally. “It can happen from people not paying attention and throwing a rug over it or a couch that doesn't have feet, and they cover the return,” Smith says. Keep furniture at least 10 inches from return vents to allow proper airflow.
Not only does it force your HVAC system to work harder—shortening its lifespan—but it also results in frozen air conditioning coils, overheated furnaces, cracked heat exchangers, and leaks in duct systems. Those issues come with both danger to your home AND big price tags for repairs.
Dirty filters, leaky ducts, and poor insulation can cause cold return vents. Leaky ducts often cause cold air to blow even after cranking the heat up. 20-30% of air, especially hot air, is lost because of leaky ducts. Cracked, holey ductwork needs sealing or replacement.
1. Openings shall not be located less than 10 feet (3048 mm) measured in any direction from an open combustion chamber or draft hood of another appliance located in the same room or space. 2. Return air shall not be taken from a hazardous or insanitary location or a refrigeration room as defined in this code.
Cleaning vents, returns, and vent covers is a crucial maintenance activity that should not be neglected. By routinely cleaning them, homeowners can prevent the buildup of dirt, dust, and other contaminants that can cause health problems and harm indoor air quality.
Dangers of Blocked Cold Air Registers
If your HVAC system is designed this way, blocking off a single return vent can wreak havoc on the system and lead to: Pressure imbalances that let allergens and pollutants get pulled into your air supply from unconditioned areas.
Contrary to what most people think, closing the vents in a room doesn't divert that air to other rooms. What's actually happening is that air will leak from the ductwork, sending cool air into areas such as interior walls and attic spaces.
Operable cold air return vents have a lever that enables you to open or shut the vent depending on the time of year. It is a small lever that you just push up or down to control louvers, similar to the variable dashboard vents in a car.
We've seen how it can create safety hazards, mess with your home's heating and cooling, and even damage your bed. Blocked vents can cause fire risks, poor air quality, uneven temperatures, and moisture buildup. Instead of covering vents, try rearranging your furniture or using vent deflectors to direct airflow.
Return air vents connect to your return ducts, and they're typically larger than supply vents. Again, depending on the design of your ductwork and home, HVAC return vent locations vary but are often in central areas, kitchens, bathrooms, and pollutant-prone areas so as to best collect stale or dirty air.
Block Off the Vent: You can block the vent by placing a piece of furniture at the opening or purchasing a magnetic damper that's strong enough to stick to the steel on the wall or ceiling. Plastic sheeting can be placed over the opening as well. You can also install a vent grille filter.