It's common knowledge that plumbers can install sinks, but you may wonder if they can also install bathroom vanities. Many times, the answer is yes. However, they will often only do it if the vanity installation is straightforward and does not require much carpentry work.
According to Angi and HomeAdvisor, vanity installation costs range from $300 to $3,800, with many homeowners spending about $1,500. For those who don't have the budget to cover a full bathroom remodel cost, replacing a bathroom vanity is an easy way to change the look and improve storage space.
Hiring Vanity Installation Professionals
The cabinet maker can install the majority of the vanity but you will need a plumber to install the basin and ensure that everything is correctly plumbed. No matter what professional it is, ensure that they are correctly qualified, licensed and insured as relevant.
A lot of people think they can't install a bathroom vanity but it's not that hard and doesn't require any expensive tools. Plus, you can do this bathroom update in an evening or over the weekend in less than one hour.
SKILL LEVEL: INTERMEDIATE. A new vanity can change the entire look and feel of a bathroom. It can also add much-needed storage. With a little planning, installing one is something you can do on your own in about 6 to 8 hours.
You can remove the doors from your new vanity to make installation easier, if needed. Check that it's level and use shims to adjust the height if necessary. Once the vanity is level, drill pilot holes into the nearest studs and attach with screws. If you don't have studs to drill into, you'll need wall anchors.
Yes, Vanities Should Be Attached to the Wall
Most of the time, plumbing comes through the wall underneath the sink, and the vanity's cabinet keeps it hidden. A vanity that isn't attached to the wall could shift, either with time or because you've accidentally bumped into it.
It can also help you sell the house. For the most part, pre-fab vanities are relatively inexpensive, so you won't notice an increase from an ROI standpoint. But, a new vanity, especially if you have enough room to add two sinks where there was one, will significantly increase the bathroom's appeal to potential buyers.
Generally, flooring contractors prefer that the cabinets go in first so that there is less possibility of the floor getting scratched. Cabinet installers like the floor to be in place so that the cutting and dust from the floor installation will not damage the vanity.
Laminate is one of the most cost-effective bathroom vanity material types. These countertops are made from layers of plastic attached to a particle board. The good news is that laminate is notably effective at resisting stains, heat, chips, and cracks.
You can sell bathroom vanity units with ease, as they are popular with buyers looking for contemporary units. You could also get your old vanities refurbished if you're ready to make a positive change.
There are several trades involved in bathroom fitting — a builder, a tiler, an electrician and a plumber. You might also need a plasterer or decorator. Some builders are able to carry out all the work required in the fitting of a bathroom.
It's usually less expensive to purchase a vanity that already includes the top and sink. Vanities with tops come pre-drilled and assembled, so it's a relatively easy do-it-yourself project. Not having to use a contractor saves you money that could be used elsewhere in the renovation.
How Long Does It Take to Change a Bathroom Sink? If you're just swapping out a sink for another or dropping a vanity and sink into place, the job usually takes less than four or five hours. Bigger sink replacement jobs can take a bit longer.
Select your vanity.
Most contractors will not begin work on your project until all the materials have arrived so this is a priority. If you hired a bathroom remodeling contractor, have him help you with the process of selecting your bathroom vanity.
First of all, tile the bathtub enclosure or shower walls before moving to other areas of your bathroom remodel. After putting up the wall tile, attend to the floor tile. Moreover, you can use grout for both of them but caulk the corners.
Bathroom vanities can be made of various different materials. Some of the most common types of vanity materials include various types of wood, MDF fiberboard, glass and stone. As long as the materials in question are solidly used in high quality vanities, they can last up to 60 years.
Replace the Bathroom Vanity Cabinet
For maximum room, replace your vanity cabinet with a cantilevered countertop or with a pedestal sink. Pedestal sinks can be self-installed and cost between $150 and $400. While pedestal sinks give you more floor space, keep in mind that your countertop space will shrink.
Light yellow, cream, beige, and gray are also favorites of prospective home buyers. We recommend avoiding reds, pinks, and greens as paint choices if you want to get top dollar for your home.
Many would-be renovators will prefer to begin upgrading their bathroom by first tiling the wall before adding a bathroom vanity unit to complete the look.
Toilet placement
A toilet should have some elbow room between it and another fixture or vanity. The NKBA's recommendation is at least 18″. Codes allow a minimum distance of 15″. If you're placing your toilet in a compartment, it should be 36″ x 66″, although codes will allow 30″ x 60″.