Hydrogen peroxide is great for removing stubborn mold, mildew and mysterious crust on surfaces throughout your house. Fill an opaque spray bottle and go nuts on your bathroom fixtures, floors and walls.
Vinegar works well on dirt, mold and mineral deposits as well as on other acid stains including coffee. Therefore, you may have found vinegar did a good job removing your coffee or tea stain. Hydrogen peroxide works differently than vinegar and is better at removing different types of stains.
If this has happened to you, soak a cotton rag in hydrogen peroxide and allow it to sit on top of the stain for 5-10 minutes. Repeat until the stain has been removed. If you're unsure how hydrogen peroxide and your hardwood floors will interact, test it on an inconspicuous section of your floor beforehand.
Hydrogen peroxide won't damage normal tiles or colored grout. However, you shouldn't use it on polished marble. Cleaning with hydrogen peroxide and baking soda is a great way to remove stubborn stains from your grout.
Before cleaning, sweep stone tile floors with a soft broom, as rougher brooms can leave scratches. Slate tile floors can be cleaned with a mixture of warm water and mild detergent such as dish soap. Avoid cleaning products that contain lemon, vinegar or other acidic substances.
Hydrogen peroxide is great at whitening and brightening stained tiles and dirty grout. Combine half a cup of hydrogen peroxide with one gallon of hot water, then go to town on your flooring. Because it's so mild, it's safe for any floor type, and there's no need to rinse.
Contrary to other chemical substances, hydrogen peroxide does not produce residues or gasses.
Hydrogen Peroxide also has a bleaching effect on wood. However, you don't need to worry because unless you apply an unnecessarily powerful hydrogen-peroxide formula or you have really dark hardwood floor, hydrogen peroxide won't affect the color of your floor. It won't whiten it.
However much you are making, just add twice as much hydrogen peroxide as you do the detergent. So for a small stain mix 1 teaspoon of Dawn with two teaspoons of peroxide. For a large batch 1 cup of hydrogen peroxide to ½ cup detergent works!
And for good reason — hydrogen peroxide is versatile and extremely cost-effective because of its ability to do the job of multiple cleaners. It's strong oxidizing properties make it a powerful disinfectant and cleaning solution. And when used correctly, it can kill multiple germs, toxins, and bacteria.
Hydrogen Peroxide and Vinegar
“Combining these two creates peracetic acid or corrosive acid, an irritant that, in high concentrations, can harm the skin, eyes, throat, nose, and lungs,” says Bock.
Hydrogen peroxide used to be a popular antiseptic for cleaning wounds and treating acne. But it's not a good idea to use it for those purposes, since it can irritate your skin. If you don't want to throw away your brown bottles, you can use hydrogen peroxide to clean and disinfect around the house.
If you want a more diluted solution, add 1 more litre of water into the mixture. This is perfect for routine cleaning. Meanwhile, for intensive deep-cleaning sessions, you can mix a 50/50 solution of hydrogen peroxide and water.
Hydrogen peroxide can discolor or damage certain materials, such as fabrics, leather, and wood, so be sure to test it on a small, unnoticeable area before using.
Hydrogen peroxide does a great job of removing hard water stains and is a less harsh alternative to bleach. Spray a solution made from equal parts hydrogen peroxide and water over your tub and leave it for 20 minutes. Then, scrub any remaining stains with a household sponge.
The bubbles you see when you pour hydrogen peroxide on a cut are bubbles of oxygen gas. Blood, cells, and some bacteria (e.g., staphylococcus) contain catalase but it's not found on the surface of your skin.
For a deep clean, probably every week or so, mix 6-7 drops of a mild detergent (dish soap is usually fine) with one gallon of warm or hot water. Use the mixture to dampen a mop, and clean the floor in sections. Make sure the mop is damp and not dripping wet, since standing water can damage linoleum.
Mix ¾ cup of bleach with 1 gallon of water. Then, clean your floors with a damp mop, and make sure you rinse the mop in hot water when it gets too dirty. Because you are using bleach, wash your hands with soap for 20 seconds after you finish cleaning your floors.
Method #5: Hydrogen Peroxide To Remove Stains
If the baking soda paste isn't enough to remove the stain, peroxide may do the trick. Grab a bottle of 3% hydrogen peroxide* (the kind in the brown bottle) and rub it onto the stain. Repeat as needed.
TLDR: professional cleaners use a detailed process to wash tile and grout. First, they start by vacuuming the floor to remove dry dirt. Next, they mop the floor to remove stains. After that, a thorough steam cleaning of your tile and grout occurs.