The tile installation principle is that the tiled wall 'hangs' over the tiled floor. The best way to achieve this outcome is by first tiling the floor so that the wall tile will then seem to be 'sitting' on the bathroom floor.
tile your walls first, then install the bath,sink and toilet, check for any leaks, when you are sure there is no leaks THEN tile the floor, and the adhesive you are planning to use, take it back to where you bought it and buy some proper adhesive and grout mate.
To get a perfectly square corner, you want to aim for a measurement ratio of 3:4:5. In other words, you want a three-foot length on your straight line, a four-foot length on your perpendicular line, and a five-foot length across. If all three measurements are correct, you'll have a perfectly square corner.
Always install tile before the toilet - the toilet is the last thing to be installed along with your faucet, and shower nozzle.
Starting a bathroom remodel can feel overwhelming, but tackling the project in the right sequence makes the process manageable and successful. By focusing first on the wet area, then moving on to the flooring, toilet, and vanity, and finishing with accessories and ventilation, you can achieve a seamless renovation.
Professional contractors generally recommend installing new flooring before placing the toilet. This approach creates a cleaner, more polished look and helps prevent future maintenance issues.
Start tiling from the middle of the wall and work outward. Measure and mark the wall's centre with a tape measure and pencil, then use a spirit level or laser level to draw vertical and horizontal guides. This ensures a balanced tile layout and avoids uneven cuts at the edges.
Unless you are in a situation where it is impossible to redo the floor tile due to the flange already being put in, never put the tiles below the existing toilet and the flange. Having the tiles go under the toilet makes it much easier to do repairs or removals.
Start at the center point and work outward. This dry layout will make sure your finished project will be centered. Insert tile spacers between the tiles.
The golden rule when installing tiles is install on a concrete floor where possible and always ensure it's level by applying a levelling compound beforehand – watch this video to find out exactly how.
The picture of the tile figures may also be described by an equation in y = mx + b form, where x and y are variables and m represents the growth rate and b represents the starting value of the pattern.
When it comes to bathroom tile trends for 2025, marble bathroom tiles are having their moment. Whether it is a classic white marble like the Carrara Bianco Marble or checkerboard tiles like the Riviera Emerald & White, marble tiles are sure to elevate any bathroom scheme, adding a timeless elegance.
Why You Should Tile the Floor First. The tile installation principle is that the tiled wall 'hangs' over the tiled floor. The best way to achieve this outcome is by first tiling the floor so that the wall tile will then seem to be 'sitting' on the bathroom floor.
A best practice is to install the toilet flange on top of the finished floor. If you install the toilet flange flush with the finished floor, or even below the finished floor, leak paths will form, because the flange won't be at the correct height to accept the horn at the bottom of the toilet.
Laying tile from the perimeter and working inwards is a commonly recommended method for achieving a professional-looking tile floor. This approach allows you to make any necessary adjustments as you go and ensures that the tiles are evenly spaced and aligned.
Do you tile under the cabinet/vanity that is to be secured to the wall on the floor? A: Here again, this is a matter of personal preference. But if the bathroom floor calls for waterproofing, the best choice would be to install tile under the cabinet.
Most ceramic tile packs cover a square metre, but we'd recommend having around 5-10% extra just in case. It's always advisable to start tiling your grid in the centre of the wall, as it's easier to make sure your pattern is symmetrical.
If you start with the walls and finish with the floor, you will be able to use your bathroom or kitchen again sooner rather than later. However, some professional tilers are against tiling the floor first as tile, adhesive and grout can fall onto your newly tiled floor, causing damage.
For those reasons, I highly recommend removing the toilet to install your tile. And the good news is: removing and reinstalling a toilet is actually very easy!
Generally, flooring contractors prefer that the cabinets go in first so that there is less possibility of the floor getting scratched. Cabinet installers like the floor to be in place so that the cutting and dust from the floor installation will not damage the vanity.