The standard height of bottom kitchen cabinets is usually around 34 to 36 inches. You should also consider the thickness of the countertop you place on it when choosing the height of your bottom kitchen cabinets. Base cabinets dictate the height of upper cabinets, and most upper cabinets have multiple shelves.
The height of a standard cabinet varies depending on the cabinets. Base cabinets – 34.5-inches or 36 inches with countertop. Tall cabinets – 84, 90, 96-inches.
There are no building codes that establish a standard upper cabinet height. The prevailing “standard” among kitchen remodelers is 54 inches from the floor to the cabinet's bottom edge. That leaves an 18-inch space between the countertops and the upper cabinets.
For the cabinet box, the standard height is 34.5”. When combined with the countertop, the standard kitchen cabinet is 36” in height. Interesting Fact: Despite the average height for kitchen cabinets being 36”, the standard height for bathroom vanities is typically a bit lower at around 32”.
There is no strict standard height for upper cabinets. The preferred height has constantly changed over the years. The most common height that contractors follow is 18 inches above the countertop. However, for clients that request some extra space, 20 inches was the usual measure.
Also, you could use 12” cabinets above the 42” ones and then fill the gaps with crown moldings or other decorative work. → For 10-foot-tall ceilings, the best option would be to have cabinetry makers build the custom cabinets to fit the space perfectly.
Generally, upper cabinets are mounted with the bottom edge being 54-inches above the floor. That means if you have 8-foot ceilings, your upper cabinets would be 42-inches tall, while a 9-foot ceiling has 54 inches available.
The recommended space between upper and lower cabinets is typically 18 inches. This measurement allows for sufficient workspace on the countertop while providing enough clearance for appliances and tasks.
Cabinet Before Flooring
In most cases, the cabinets are installed before the floor covering but after the subfloor and underlayment.
8 Ft Ceilings – use a 39″ or 42″ upper cabinet
It is generally recommended that wall cabinets be mounted 54 inches up from the floor, which means that for 8 foot ceilings, a 39 or 42 inch upper cabinet will reach the ceiling, depending on the height of the crown molding used at the top of the cabinet.
Base cabinets are mounted on the floor. They hold the countertop and the sink. IKEA base cabinets are 30 inches high and 24.75 inches deep. After adding legs and a countertop, they reach 36 inches, which is the standard countertop height for U.S. Kitchens.
A floating wood floor has to be free to expand and contract with seasonal changes in humidity, and it can't do that with heavy cabinets resting on top of it.
Yes and no. It really depends on your preference, the type of cabinet, and more importantly, on the type of kitchen flooring you have and how it is installed. It isn't necessary to have your kitchen cabinets sit on the subfloor, and it certainly isn't the desired option among contractors.
A quick search online brings up a lot of debate on the issue, but no clear answers, so let us simplify for you: In our opinion, you are much, much better off laying your floor up to the edges of the units and appliances, rather than trying to install underneath them.
The standard height for upper cabinets from the counter is 18 inches, or 1 foot and 6 inches. They shouldn't be less than 15 inches away or more than 20 inches away. This also means the height to where the bottom of your upper cabinets starts.
The distance between the base cabinet (including kitchen countertops) and wall cabinet is normally between 18 and 20 inches. This is low enough to provide easy access to the wall cabinet contents for most people, and still have enough space to keep and use small appliances as well as use the workspace comfortably.
Cabinets come in standard sizes, and to reach the ceiling, you will need to figure out what size works best. Most kitchen ceilings are 8 to 9 feet high. You can likely use 42-inch tall wall cabinets, with 12-inch additions on top if needed, to achieve the height you want. You can fill any gaps with crown moulding.
Whether kitchen cabinets should go all the way up to the ceiling is dependent on the size of your upper cabinets and the standard height of your ceiling that has gradually evolved over time from 8 feet tall to 9 or 10 feet tall on the first floor.
Ceiling height kitchen cabinets have recently grown in popularity. These are cabinets that extend from above the counter all the way to the ceiling. However, not every house has this design. Other homes have cabinets that leave a foot or two between the ceiling and the top of the cabinets, per Wolf Home Products.
There is a valid reason for the gap between the kitchen cabinets and the ceiling; this is the height that most people can reach by standing on the floor or by using a ladder. If you don't like the gap between the kitchen cabinets and the ceiling there are some clever and beautiful ways to fill the void.
Putting hardwood floors in your kitchen will look luxurious. Great choice. When building your kitchen using hardwood flooring, we recommend installing your hardwood flooring before adding any cabinetry or appliances. When installing a floating flooring such as vinyl or laminate, we advise installing cabinetry first.
By installing flooring underneath your appliances, you'll avoid any gaps or transitions that can be visually unappealing. Protection: Another benefit of installing flooring under appliances is that it provides protection for your subfloor. Over time, appliances can leak or spill, causing damage to the subfloor.
Prevents Water Damage
If water gets stuck underneath your cabinetry, it could cause a mold or mildew problem in your grout lines or subfloor. By installing your tile first, you'll be able to catch leaks sooner, as the water won't have a chance to seep between the tile and subfloor.
Generally, it is much better to install your flooring before your cabinets; this is for many reasons, such as: The flooring contractor will not have to work around the exsiting cabinets, making the process quicker. The flooring finish can be applied after the cabients has been fitted.