Vinegar and Soda Solution To use this dynamic duo, pour about a cup of baking soda into the toilet bowl with little water and scrub gently until it forms a paste-like consistency. Allow it to sit for at least 20 minutes before pouring 2 cups of vinegar around the bowl.
Car wax protects cars under extreme conditions. The same automotive wax works really well in your toilet bowl. It keeps everything looking clean a lot longer with a lot less work.
Vinegar and Baking Soda
Pour a cup of vinegar into the bowl, then mix it around with a toilet brush. Add a cup of baking soda to the coated areas and immediately follow up by adding another cup of vinegar. Wait about 10 minutes to allow the baking soda and vinegar to interact, creating that effective fizzing action.
The acidic values of vinegar allow it to soften limescale and prepare it for scrubbing clean. Pour undiluted white vinegar into your toilet bowl, making sure you get it up under the rim where limescale often gathers and cover every part of the surface. Leave it for three to four hours and then scrub it with a brush.
Over time, pipes and plumbing fixtures can corrode, causing rust to form inside them. As water flows through these rusty pipes and fixtures, it can pick up small rust particles, discoloring the water. When the water reaches your toilet bowl, that strange brown hue appears.
Pour white vinegar into the bowl to cover the stained areas. Let the vinegar soak for 30 minutes to an hour. Scrub the stained areas with a toilet brush. If the stains persist, sprinkle baking soda on the remaining stains and let it sit for up to 10 minutes, then scrub again with the toilet brush.
Allow the baking soda and vinegar mixture to sit in the toilet bowl for about 30 minutes to overnight depending on the clog. This waiting period gives the solution enough time to work on softening and dislodging the clog. While you're waiting, carefully add hot water into the toilet bowl.
To get rid of these stains, pour roughly three cups of distilled vinegar directly into the bowl and let the vinegar do the work. Using a toilet brush, dip it into the water and scrub around the inner edges of the bowl. Be sure to get underneath the rim of the bowl where buildup is particularly prone to occur.
Now comes the time-consuming part of removing all of the old caulk with a razor blade. I found after trying both Goo-Gone and Dawn dish soap, that a very simple way to remove wax off of the linoleum was to use good, old-fashioned baking soda.
Sprinkle baking soda at the end of the day after everyone has gone to sleep. Swish it with the toilet brush to get it above the water line and leave overnight with the closed lid. Just flush in the morning. Use an automatic toilet bowl cleaner.
First, you have to thoroughly clean your toilet. The bowl must be completely dry, so you either wait for it to air dry or go in with a paper towel (this is where the gloves really count). Then, shake the bottle, spritz the SpotLESS coating around the inside of the bowl, and let it air dry for 15 minutes.
Our favorite, editor-approved toilet bowl cleaner is the Lysol Power Toilet Bowl Cleaner. It's an easy-to-find cleaner that works great on tough stains, has a clean scent, and lasts for a long time.
Choose a stone on a stick so your hands don't have to get too close to the toilet bowl. A few swipes with the pumice stone should do the trick. (Because the pumice is a softer stone, it won't scratch the porcelain surface.) Flush again.
We recommend using a mixture of ¼ cup of vinegar for every 1 cup of water. This ensures your toilet tank is being disinfected without causing damage, which the use of bleach or chemical cleaners can do.
Again, we prefer to let it sit overnight whenever possible. Once enough time has passed, go ahead and flush your toilet. You may be pleasantly surprised at how well this non toxic dish soap unclogs your toilet!
White vinegar
All you need to do is pour a generous amount of white vinegar down your toilet bowl, let it soak in overnight, then scrub with a brush. Then flush to rinse, and voilà, your toilet is back to its former whiteness!
While hard water stains are certainly difficult to remove, they are not permanent. There are several effective, non-toxic cleaners you can use to remove pesky hard water stains from your toilet bowl, including baking soda and vinegar, Bon Ami or Bar Keepers Friend, and borax.
For older stains, using an industrial-strength cleaner like CLR should do the trick. Another less conventional strategy you can try is removing the stains with Coca-Cola. To do this, simply pour a full can of Coke into the toilet and let it sit in the bowl overnight. Then flush the toilet the next day.
Bleach both disinfects and banishes stains.
Start by pouring a bucket of water into your toilet bowl. This causes it to flush without triggering the tank to refill the bowl. Next, coat the entire bowl with a bleach-based cleaner, and let it sit for at least 2 hours, then flush your toilet to rinse the bleach away.
Use vinegar or another acidic cleaner to clean calcium buildup from your toilet. The acid will break down the mineral deposits so you can brush them away. Be sure to take the necessary safety precautions when working with cleaners. Wear gloves and eyewear and open windows for ventilation.
Who knew that dishwasher tablets could help keep your toilet sparkling clean? Just drop a dishwasher tablet in toilet bowl and let it sit for 10-15 minutes. Then, use a toilet brush to scrub the bowl and flush it. The tablet will help to break down any stains or buildup in the bowl, leaving it fresh and clean.