You can use a mixture of white vinegar and baking soda to scrub away hard water stains. Let it sit for a few minutes before scrubbing and flushing. For better results, use a citric acid solution to help break down the mineral deposits.
White vinegar
All you need to do is pour a generous amount of white vinegar down your toilet bowl, let it soak in overnight, then scrub with a brush. Then flush to rinse, and voilà, your toilet is back to its former whiteness!
For older stains, using an industrial-strength cleaner like CLR should do the trick. Another less conventional strategy you can try is removing the stains with Coca-Cola. To do this, simply pour a full can of Coke into the toilet and let it sit in the bowl overnight. Then flush the toilet the next day.
CLR® Calcium, Lime & Rust Remover is formulated to do the dirty work other household cleaners can't. And though it's more powerful on toilet bowl stains including rust, it's easy on the environment.
Bleach only masks the problem—it doesn't get rid of it for good. Instead, try citric acid and a toilet pumice stone for a permanent solution. 🧽✨ Citric acid breaks down those mineral stains, and the pumice stone gently scrubs them away. Say goodbye to those marks for good!
Who knew that dishwasher tablets could help keep your toilet sparkling clean? Just drop a dishwasher tablet in toilet bowl and let it sit for 10-15 minutes. Then, use a toilet brush to scrub the bowl and flush it. The tablet will help to break down any stains or buildup in the bowl, leaving it fresh and clean.
Vinegar and baking soda: Add 1 or 2 cups of vinegar to the toilet bowl along with a few sprinkles of baking soda. Swish the solution around the bowl with your brush for a few minutes and then let it sit for about 15 minutes. Scrub the stains with your brush (or pumice stone).
Pour lemon juice or vinegar on the deposits. Don't dilute the vinegar or lemon juice, or you'll reduce its effectiveness. Leave the acidic liquids in place for a few hours to do their work, preferably overnight. Scrub the scale with a stiff-bristled toilet brush before flushing the toilet.
The 'fizzing' reaction of the baking soda combined with vinegar can also play a part. That fizzing may help to break down the clog into smaller particles, making them easier to flush!
Always wear gloves when cleaning with vinegar to protect your skin from the acid. A special tip: Coca Cola – this fizzy drink contains phosphoric acid which also removes limescale and urine scale.
The acidic values of vinegar allow it to soften limescale and prepare it for scrubbing clean. Pour undiluted white vinegar into your toilet bowl, making sure you get it up under the rim where limescale often gathers and cover every part of the surface. Leave it for three to four hours and then scrub it with a brush.
Our favorite, editor-approved toilet bowl cleaner is the Lysol Power Toilet Bowl Cleaner. It's an easy-to-find cleaner that works great on tough stains, has a clean scent, and lasts for a long time.
In conclusion, leaving vinegar in the toilet overnight is not recommended as it can cause damage to the porcelain surface. The best way to clean a toilet is with a mixture of baking soda and white vinegar, followed by regular cleaning with bleach or other cleaning products for tougher stains or odors.
Brown stains under the toilet rim are often caused by a combination of scale and urinary stone. There can also be a build-up of deposits deeper inside the toilet, where toilet water remains. Lime scale is the most common type of scale on plumbing fixtures.
Showerheads are particularly prone to limescale build-up – even in areas with soft water. To make cleaning a bathroom easier, you can use a dishwasher tablet to help clean a showerhead and soak off limescale without scrubbing.
Add a cup of white distilled vinegar to the tank once a month. Leave it to sit overnight and then flush it in the morning. Check for sediment buildup and staining every month or so. This may be especially important if you have hard water or if you have a toilet that doesn't get used very much.
The best way to clean toilet stains from tough mineral buildup is with lemon juice or any source of citric acid. Spray on the lemon juice and leave it overnight. Then spay on another light layer and wait a few minutes before scrubbing your toilet. Flush to rinse away the stain.
A much better solution is to use some WD-40 Multi-Use Product. Most people don't know that WD-40 can solve many of their household cleaning needs quickly and easily. When cleaning a toilet bowl, WD-40 works by softening the rust and lime deposits, so they can be easily wiped away. You don't need to use much of it.
Mix equal parts of lemon juice and borax to form a paste. Apply the paste to the affected areas and let it sit for at least two hours. Use a toilet brush to scrub the rust stains away, and finally, flush the toilet. Repeat the process as necessary until the rust is completely gone.
Use vinegar or another acidic cleaner to clean calcium buildup from your toilet. The acid will break down the mineral deposits so you can brush them away. Be sure to take the necessary safety precautions when working with cleaners. Wear gloves and eyewear and open windows for ventilation.
If CLR Grease & Oil Remover is left on a surface for too long it begins to dry and can be very difficult to remove.
It really depends on what kind of cleaning you need to do. If you're dealing with really tough, built-up mineral deposits, especially in your bathroom or kitchen, CLR might be the way to go. It's strong enough to handle stains that vinegar might struggle with.