Wiping the tiles with a premade solution of 10% bleach and 90% water should remove most of the mold (source). For particularly tough stains, try mixing a solution of 25% bleach and 75% baking soda in a cup. Always test the solution on a small section of your ceramic tile before you tackle the mold.
Add 2 tablespoons baking soda and gently pry the burned-on residue with a wood spoon (don't use any utensil that could scratch the coating). This works on just about any burnt-on ceramic stain. Rinse and dry -- and you're good to go! (Back into cooking with a fresh-looking frying pan, that is.)
Create a paste with lemon juice and baking soda. Apply it to the rust stain, let it sit, and scrub gently. Combine vinegar and dish soap. Apply the mixture to the soap scum, let it sit, and scrub with a sponge.
While hydrogen peroxide is not normally used for cleaning surfaces, there is nothing in normal glazed porcelain that it would damage. Porcelain is about as unreactive to most things as glass, which is unreactive enough to be used for the bottles that store hydrogen peroxide.
Mix 1-2 scoops of Groutmaster with 1 gallon of water. To clean your ceramic tiles, dip a clean microfiber cloth or mop into the solution and squeeze out any extra liquid. Focus on the black spots when you put the cleaner on the tiles. Let the cleaner sit so that it has time to break down the spots.
For particularly tough stains, try mixing a solution of 25% bleach and 75% baking soda in a cup. Always test the solution on a small section of your ceramic tile before you tackle the mold.
White vinegar is an acidic solution that can etch or corrode some tiles, particularly those made from natural stone or unglazed ceramic. The acid in white vinegar can also weaken and deteriorate certain grouts over time, particularly if the grout is already damaged or in poor condition.
It's simple. If you use baking soda on your ceramic hob alone, you will scratch it. That being said, if you use it in combination with vinegar as we showed you in our guide, your ceramic hob will be absolutely fine and scratch-free.
For coffee, tea or juice stains, wash the tile surface with hot water and detergent, then blot with hydrogen peroxide. For grease stains, wash with club soda and water, or a commercial floor cleaner. For ink stains, soak a cloth in diluted bleach and lay it on top of the stain.
DISINFECTANTS FOR CERAMIC, PORCELAIN, GLASS & QUARTZ
Many disinfectants can be used on these materials, due to their resistance to common household chemicals. 70% Isopropyl alcohol, diluted bleach or 3% hydrogen peroxide can be used.
Chlorine Bleach – For the most stubborn stains, diluted chlorine bleach can do the trick. Use with caution and ventilation. Commercial Tile Cleaners – Products specifically formulated for tiles like Lysol or Mr. Clean often have a blend of ingredients to tackle various stains.
The penetrated moisture combined with organic matter (Tea & coffee, oil, fat, food, dust, etc.) evolves into a bacteria that typically is brown or black sitting between the glazed craze lines or in the clay body under the glaze.
For ceramic tile, acetone nail polish remover will be okay. However, stone tiles that have not been sealed, some porcelain tiles, porous soap stone, granite tiles, and marble tiles can experience problems with the use of nail polish remover or nail polish that gets stuck in the cracks.
It Can Clean Lots of Things, but Not Everything
But for hard, non-porous surfaces like stainless steel, porcelain, ceramic, or glass, go for it! In addition to pots and pans, you can use Bar Keepers Friend to shine up your cutlery or serveware, your copper mugs for Moscow Mules, or even the inside of your microwave!
For stubborn spots that didn't lift with the initial wipe down, create a paste of equal parts baking soda and water. Apply this paste to the area, allowing it to sit for about 10-15 minutes. This gives it time to break down the stubborn residue. After letting the paste sit, scrub gently with your microfibre cloth.
It is important to remember that bleach should not be used on all surfaces. It can cause discoloration and damage to certain surfaces, such as fabric, leather, and some types of tile. Bleach should only be used on surfaces that are resistant to its effects, such as porcelain and ceramic tiles.
Both salt and vinegar are effective agents against stains of any kind. In a bowl, add 2 tablespoons of salt and 4 tablespoons of white vinegar. Using a scrub, apply this paste all over the crockery and scrub thoroughly. Leave the crockery covered in this paste for 10 minutes.
Many homeowners ask if Magic Erasers® can be used on porcelain or if they will damage ceramic tile. The good news is that they can be safely used on ceramic tiles and porcelain, so you have nothing to worry about if you plan on using them this way.
For cleaning new home ceramics, spray hydrogen peroxide on the ceramics and joints. For tougher stains and dirt, you can allow the solution to sit on the surface for a while, usually a few minutes. Gently clean the surface with a sponge or brush.
Don't Use Abrasive Cleaners
Ceramic isn't indestructible the way carbon steel and cast iron are—i.e., there's no way to restore that coating once it's been severely damaged. Aside from only using non-abrasive tools and utensils, you should also avoid harsh cleaning agents like bleach, oven cleaner, and ammonia.
Fill the pan halfway with water and bring it to a near-boil for about 2 minutes. Pour out the water and place the pan on a sturdy, flat surface. Carefully use a Mr. Clean Magic Eraser on the warm pan, and any residual carbon should clean up quickly.
Use OVEN CLEANER all around the kitchen - you can safely apply it to porcelain, chrome, glass, ceramic, stainless steel and cast iron surfaces.
For those stubborn stains that won't budge, a paste of baking soda and water is your best friend . Apply the paste gently on the affected area, let it sit for a few hours or overnight, then wash as usual. This mild abrasive action helps lift stains without damaging the pan.
All you need to do is to blot the affected area on tile floors with hydrogen peroxide. Use a clean microfiber cloth and blot it over the stain. Leave it for 10 to 15 minutes and rinse it with clean water. This trick work wonders and brings back the lost shine of your ceramic and faux tile flooring.
Deep Cleaning Techniques
Here's how to do that without damaging the coating of your pan. Mix together a 1:1 ratio (we suggest roughly 2 tablespoons each) of white vinegar and baking soda, then gently scrub with a sponge or dishcloth to create a paste.