The typical heating cycle lasts 10-15 minutes. If your furnace shuts off after a few minutes and starts more than eight times an hour, it may require repair. Common causes of furnace short cycling include restricted airflow, a malfunctioning flame sensor, or a poorly placed thermostat.
If your furnace keeps turning off, check for issues such as: Dirty Air Filters. A clogged filter restricts airflow, causing the furnace to overheat. Replace air filters every 60 to 90 days to prevent this problem.
There are multiple reasons why your furnace is short cycling. These could include a dirty filter, blocked vent, or malfunctioning flame sensor. You can switch for a clean furnace filter, or have your HVAC technician resolve a more complicated issue.
Having a dirty air filter in your furnace can cause short cycling. While a faulty flame sensor will lead to an immediate shut-off, a dirty filter will allow your furnace to run for several minutes and then shut down. You might notice that the air being pumped out of the heat grates is significantly hotter than normal.
One possible issue for a furnace running only for 5 minutes could be a malfunction with the thermostat. The thermostat is responsible for regulating the temperature in your home and communicating with your furnace to turn on and off as needed.
Blocked vents or a clogged air filter may cause your furnace to run and then shut off too early. It's easy to fix these issues on your own. You should change your furnace filter at least once every three months. Follow our guide to do it yourself.
With all that being said, if there are no extreme factors involved, the average run time for a furnace is 10-15 minutes per cycle. Your furnace may need to run two to three times an hour to maintain your desired temperature if your home has average insulation.
3- Furnace Shuts Off After 15 Minutes Due to a Dirty Air Filter. If your furnace shuts off after 15 minutes, a dirty air filter is likely blocking your heat.
A bad thermostat can be detected when your AC or furnace is not turning on, your HVAC systems are not turning off, the thermostat not responding, your HVAC system is short-cycling, the room temperature not matching the temperature displayed on the thermostat, and the programmed setting resetting themselves.
The simple solution: Turn your furnace off and check the filter. If it's dirty or it's been 3 months or more since you changed it, put a new, high-quality filter in place.
The most common problems that cause a furnace to short cycle include: An overheating heat exchanger. A dirty flame sensor rod. A blocked flue pipe.
Short cycling is a common sign of a bad flame sensor. The sensor thinks that there isn't a flame, so it shuts off the gas as a safety mechanism. Except, there is a flame and without the gas to supply it, it dies. This is a frustrating problem, but an HVAC technician can fix it.
Ask twenty professional HVAC contractors the question, “How Much Does A New Furnace Cost?” and you'll probably get the same answer... “It depends.” On average, the cost of a new furnace can range from $2,000 - $14,2001. However, factors like furnace efficiency, type, size, and much more can impact this range.
Filthy Air Filter
Inspect the filter, and if it's dirty, replace it. From here on out, change the filter every 30 to 90 days to prevent your furnace from short cycling.
When a furnace is short cycling, it's working hard to produce heat but isn't making any, causing strain on your furnace. If left unchecked, this could cause major issues for your furnace resulting in hefty repairs.
The limit switch monitors the temperature and shuts down the burners if the furnace starts to overheat. A blower fan activates to cool the system down to a safe temperature. After the furnace is at a safe temperature again, the limit switch triggers the burners to repeat the process.
But when your furnace won't shut off, the thermostat is often the first place to inspect. A common issue is incorrect settings. Make sure your thermostat isn't set to a constant “heat” or “on” mode, which can cause the furnace to run continuously.
Short cycling indicates a problem within a heater that is cutting off its heating cycle before it finishes. This can be caused by a range of issues, which vary in severity and necessary repair.
Furnaces typically run for about 10 to 15 minutes in moderate weather. Extreme cold can result in longer cycle times.
Generally, a furnace cycle lasts anywhere between three to 10 times every hour; however, the frequency changes depending on several factors. If your furnace is cycling on and off more frequently than it should, there could be a problem with one of its internal components.
If your furnace shuts down after a few minutes, it's likely due to a faulty or unhygienic flame sensor. This crucial component intends to monitor the gas burner. Also, when a flame sensor cannot detect the burner, the furnace runs for a few moments before shutting down and restarting.
What Causes Short Cycling? Furnaces have built-in safety systems that prevent dangerous situations like fires, carbon monoxide leaks, or gas leaks. The most likely cause of short cycling is the fan limiter, which prevents fires and furnace damage by shutting the system down if the heat exchanger becomes too hot.
HVAC maintenance companies explain that a furnace will normally perform an average of two to three cycles in an hour, with each cycle lasting 10 to 15 minutes. But to keep temperatures at a comfortable level during cold weather, a furnace might need to increase this range to three to 10 cycles.