Depending on how bad the stain is, you'll either wait between 2 hours or overnight. Once your waiting time is up, unhook your ball valve and allow it to float - slowly filling up your cistern. When the toilet is ready, flush it. Now that you've flushed the coke you can grab your toilet brush and start scrubbing.
Instructions: 1. Pour about 1 cup of baking soda into the toilet bowl. 2. Follow with 1-2 cups of white vinegar. 3. Let it fizz and sit for about 30 minutes. 4. Scrub the bowl with a toilet brush, focusing on the ring. 5. Flush to rinse.
Vinegar essence is therefore a better choice for harder-to-treat limescale – but it should always be diluted with water. Always wear gloves when cleaning with vinegar to protect your skin from the acid. A special tip: Coca Cola – this fizzy drink contains phosphoric acid which also removes limescale and urine scale.
By pouring a caustic soda (coke, for example) into the toilet bowl, you can speed the dissolving process along considerably. Simply dump a can of cola in the water and let it eat away at the debris. Just be sure never to flush the toilet when the water level is already high.
One of the strongest substances for unclogging a toilet is a commercial drain cleaner specifically designed for toilet clogs. These cleaners typically contain powerful chemicals that dissolve organic matter and stubborn blockages.
Coca‑Cola contains phosphoric acid, a safe food ingredient used in some of our beverages which can help clean off dirt. However, because Coca‑Cola is a beverage, not a cleaning agent, it isn't effective at killing germs, and there are lots of products that are much better at cleaning.
Clean Your Toilet Bowl with Coca Cola
To try this method, simply pour one litre of Coca Cola into the toilet bowl and leave it to sit for an hour. This gives it time to work its magic. Come back an hour later and give the toilet bowl a thorough scrub before flushing and you'll find no more limescale!
Try this: Swish a cup of vinegar around in the toilet bowl using a toilet brush, then add a cup of baking soda, followed by an additional cup of vinegar. Let the fizzing solution sit for 10 minutes. Use a toilet brush to scrub stains. Let mixture sit for a few more minutes and then flush.
White vinegar
The mild acid can dissolve limescale and disinfect. All you need to do is pour a generous amount of white vinegar down your toilet bowl, let it soak in overnight, then scrub with a brush. Then flush to rinse, and voilà, your toilet is back to its former whiteness!
Get rid of toilet rings with magic erasers
Cut off a quarter of a magic eraser and drop it into the toilet water. Let the piece sit in your toilet overnight to work its… well, magic! Do not flush the magic eraser down the toilet ! Remove it in the morning, then flush to rinse away any residue.
Pour white vinegar into the bowl to cover the stained areas. Let the vinegar soak for 30 minutes to an hour. Scrub the stained areas with a toilet brush. If the stains persist, sprinkle baking soda on the remaining stains and let it sit for up to 10 minutes, then scrub again with the toilet brush.
STEP2 - Pour out a glass of your cola. STEP3 - Cover one side of each coin with Blu-Tac but leave the other side open. STEP4 - Pop your coins into your glass of coke. STEP5 - Sit back and wait but you should be able to see a difference in the colour of your coins within about an hour.
Mix Coca-Cola, vinegar and salt and you will get the best cleaning agent for the bathroom, sink, kitchen, dishes and other surfaces. Removes scale and deposits and disinfects. Better than store-bought chemicals and cleaners. The best DIY home tricks.
Consider using Bon Ami, Bar Keepers Friend, or The Pink Stuff, which are commercial cleaners that work well to remove toilet bowl rings.
Professional cleaners often use the same household supplies as you would: toilet-bowl cleaner (or bleach), disinfectant wipes, rubber gloves, as well as a nonscratch scrub sponge, a microfiber cloth, or paper towels. A handheld scrub brush or a pumice stone can get to especially tough stains.
Choose cleaning products that are designed specifically for cleaning toilets. Avoid using abrasive cleaners, bleach, or other harsh chemicals that can damage your toilet's surface.
While Coca-Cola works well for rings of limescale or rust stains in toilets, it may not completely eliminate every stain. If a second application of Coke doesn't remove your stains, move on to using a cleaning option in the section below.
While it can be put to a number of helpful uses around the home, WD 40 is particularly good at softening rust and limescale deposits in the toilet (and bathroom). All you have to do is spray it on the desired section of the toilet, wait a few minutes, then scrub it away with a toilet brush.
By adding water to your soft drinks, the only thing you are reducing is the taste; it won't be as sugary as it should be but in the real sense, the calorie of the drink is still the same.”
Once the bowl is empty, add some cleaning vinegar {or regular white vinegar if this is all you have} to the bowl to completely cover any stains. If your stains are more up underneath the rim or along the sides, soak a rag or paper towels in the vinegar and place over stain. Leave overnight and then scrub.
Pour undiluted white vinegar into your toilet bowl, making sure you get it up under the rim where limescale often gathers and cover every part of the surface. Leave it for three to four hours and then scrub it with a brush. Repeat if necessary.
Believe it. Coca-cola works on much the same principle as baking soda and water. The carbonation, along with its acidic composition work to break up solids and dislodge clogs.