Especially ceramic and porcelain tile and grout! Blue dawn does not discolor grout joints and further is a great degreasing agent from everyday traffic. Use daily to weekly. The more traffic, the more cleaning.
For most types of tile, including porcelain and ceramic, you only need one key ingredient: A DIY mixture of warm water and dish soap will do the trick. Follow these steps to clean tiles: Spray the water and dish soap solution on the tile surface. Wipe the area with a damp microfiber towel or cloth.
A solution of vinegar diluted 1-to-1 with water or a diluted commercial ceramic tile cleaner can be used to clean stains.
While vinegar is safe to use on laminate, vinyl, porcelain, and ceramic tile, it is best to use it sparingly since the acid in the vinegar can dissolve the finish on your floor. Therefore, when you are using it on tiled floors, you want to make sure you cut it with water or rinse it completely with water.
For polished or glazed porcelain tile, wipe with hot water and scrub stains with a bristle brush. Wash with vinegar solution or a commercial tile cleaner diluted to half strength. Wash one more time with hot water to rinse off the cleaner, then dry with a clean towel.
To revive dull, faded tiles and give them a gorgeous shine, an ammonia-water mix is one of the best. This inexpensive and easy-to-use solution is powered by the natural cleaning properties of ammonia and will leave your tiles looking their best.
Baking Soda, Dawn and Peroxide for a Deeper Clean
While baking soda and peroxide work excellently together to whiten and clean grout, adding a little Dawn dish soap makes the combo even better. For this homemade grout cleaner recipe, you're actually going to mix them together first.
After trying different commercial cleaners, we decided to mix one part Dawn dish soap and to two parts white vinegar, which I had on hand, in a bucket and mopped the floor with the soapy mixture. How it actually worked: The combo was a winner and brought the floor (almost) back to its original glory.
Do not use cleaning products that contain acids or ammonia (and other harsh chemicals) as these can damage grout and glazed surfaces of the tile. Choose products that are compatible with your grout to avoid damage or discoloration of the grout. Always dry your porcelain thoroughly after cleaning.
That being said, non-abrasive cleaners are the best way to clean a porcelain sink. Common household go-to's like bleach and hydrogen peroxide can be used to clean white porcelain, but the solution would need to sit covered in a layer of paper towels for 30 minutes to an hour.
In some cases where the tile surface has a texture that tends to get dirty easily, a penetrating sealer can be applied to the tile surface. The sealer acts as a bond breaker so dirt doesn't tend to cling to it.
Making Homemade grout cleaner with blue dawn is quite simple. Use one drop of blue dawn in a 32-ounce trigger bottle and mix with water. Spray on the surface standing up and use a microfiber padded mop as apparatus.
“Vinegar is a good cleaner because it's acidic, but when you add dishwashing liquid/dish soap to it (which is a base or neutral) - you neutralise the vinegar. You take away the very thing that makes it work well. “The dishwashing liquid works that well on its own. Adding the vinegar is a pointless step.”
Apply the cleaner
In most cases, vinegar is the best product to clean shower tiles. However, if you are using another cleaning product, the process is almost the same!
Try mopping your tile floor using this DIY cleaning recipe: ¼ cup white vinegar, 1 tablespoon liquid dish soap, ¼ cup baking soda, and 2 gallons of very warm water. You can also add a few drops of lavender essential oil for a fresh scent!
The most common and effective homemade grout cleaner is a mixture of baking soda, hydrogen peroxide, and dish soap. Cream or tartar and lemon juice is the best all-natural solution for whitening. Avoid using highly-acidic solutions like vinegar because they can corrode grout.
The easiest way to clean grout without scrubbing involves hydrogen peroxide and baking soda. Mix the two into a paste with some dish soap and apply to the grout lines. Alternatively, you can use a cleaning solution of water, vinegar, lemon juice, and baking soda.
Porcelain tiles or ceramic tiles can be polished using white vinegar and dish soap, plus a microfibre cloth. Wood tiles generally need to be waxed using specific floor wax.
Grab your bucket and fill it up with 1 gallon of hot water then stir in ¼ cup of white vinegar. Vinegar is a tough yet natural cleaning solution that will surely clean up any messes that may be found on your tile. Go on and mop the floor with your vinegar solution. Or use a large sponge.
The reason may be anything for your tiles to look dull or drab. It can be either grout discoloration or leftover soap or residue from all the different cleaning solutions used. If there is enough determination in us, we can get the old shine back to our porcelain tiles and make them as good as new.
Swiffer wet cloths are designed to be used on most floor surfaces, such as: vinyl. porcelain tiles. ceramic tiles.
Wet clean: Plan to mop the tile floor in your kitchen once every two weeks and your bathroom tile floor once a week (germs tend to build up in bathrooms).