The basic rule of thumb is every 3-5 years. For film-forming sealants, you will be able to notice when the physical barrier is showing signs of wear. For non-film-forming sealants, you will begin to see a significant color change of pavers during a rain when the sealant is wearing thin.
Pavers should be resealed every 3 to 4 years on average. You will know when your pavers need to be resealed because water will stop beading on the surface and the sheen will diminish. In addition, you may notice weeds starting to grow in between joints and the pavers may start to lose their color.
Paver sealant is a great tool to keep paver driveways, patios, walkways, and pool decks, in mint condition, but it's not always necessary. While it's not a must-have, pavers that aren't sealed typically grow weeds in the cracks, lose color over time, and can even have shifting caused by a lack of joint sand.
Concrete Pavers: Concrete pavers are the most common type of paver and require the most maintenance. These pavers need to be sealed for protection against weathering, fading, staining, and oil or grease spills. For best results, concrete pavers should be sealed every two to three years.
Fall or spring is a great time of the year to seal pavers. Cooler weather allows the sealer to penetrate into the pavers unhindered.
How often do I need to reseal my pavers? If your sealant has been applied correctly by a professional, it should last between two to three years. The care given to the area and other elements like traffic or weather will also play a part in its longevity.
What are the ideal weather conditions for sealing? Ideal conditions would be 75 degrees and sunny; however, anywhere between 50-90 degrees is generally fine. Take note that solvent-based sealants evaporate faster, so lower temperatures are better for application.
Never Too Late to Seal Pavers
It's always best to seal soon after a new installation. But, our proven system of repairing, cleaning and sealing will also bring back the original luster to old, dirty and fading pavers. Sealing is the final step in a comprehensive process.
How Much Does It Cost to Clean and Reseal Pavers per Square Foot? In total, you should expect to pay around $2 per square foot to clean and seal pavers. The price may vary between $1 and $3 per square foot, depending on the sealant and method of cleaning.
Using a nap roller for sealer application will take several times longer than using a paver sealer sprayer and joint stabilization is difficult to achieve. Spraying is the preferred method of applying water based paver sealers as it allows enough sealer to get into the joints.
Acrylics. Acrylic paver sealers, either solvent- or water-based, offer the most comprehensive ultraviolet (UV) resistance. Acrylic sealants can be breathable, depending on their solid content.
If the sealer is not cured correctly, water can cause white marks or stains on your pavers and can even be trapped beneath the layer of sealer. It is very important not to walk or drive on sealed pavers at least 24-48 hours after application. A protective sealer enhances the natural color and beauty of your pavers.
Most contractors and manufacturers recommend sealing pavers for the many benefits. Both concrete and brick pavers are porous materials that can change quality and appearance when they absorb liquids.
Although the Universeal range of paving sealers only take a few hours to dry, it is probably best not to walk on your paving for up to 4 hours. If the sun has been out, then at least 2 hours is recommended. It is also recommended that heavy foot traffic should be avoided for 7 hours.
Your concrete pavers will look better than new. 5 gal. bucket covers approximately 500 sq. ft.
We alway recommend 2 coats of sealer for optimum performance.
Enhanced aesthetic: The paver sealer enhances the curb appeal of your properties and provides perfect finish to the paved areas and at the same time stabilizes the joint sand by locking it in place. It protects the pavement against harmful UV rays and prevents fading.
Should Pavers Be Dry Before The Sealing Proccess? Yes, it is important to ensure that your pavers and your pool deck are dry before applying sealer. If they are wet, the sealer will not be able to adhere properly and could eventually peel off and cause damage to the pavers.
Do my brick pavers need to be stripped? In some cases, it may be necessary to strip off any existing sealer before applying a new sealant, especially if the existing sealer was applied incorrectly. This is especially true if you are switching from one type of sealer to another.
While a thorough cleaning, sanding, and sealing process can significantly hinder weed growth and prevent them from taking over your paver system, it is important to understand that sealing alone cannot completely eradicate weeds.
You need 48 hours of dry weather after your sealer has been applied to cure it. (Remember to turn off your automatic water sprinklers.) If the sealer is not cured correctly, water can cause white marks or stains on your pavers and can even be trapped beneath the layer of sealer.