However, most manufacturers recommended replacing water pressure regulators about once every five years to limit any potential damage high water pressure could have on the plumbing infrastructure.
How long will a Water Pressure Reducing Valve last? The life expectancy of a water pressure regulator is most commonly in the range of 10 to 15 years. However, you may see a regulator malfunction at three years and one still properly functioning at 20 years old if regularly maintained.
Water pressure regulators need replacement about once every 4 to 12 years. While some PRVs may last longer than others, manufacturers recommend swapping out your regulator at least once every 5 years to prevent damage. Your home will show signs when your regulator may be failing.
Some of the first signs of a failing pressure regulator are a leaking water heater or commode. The water coming from a faucet may also exit with such force that splashing or water “hammering” may occur.
Under normal conditions, the useful safe service life of a pressure relief valve is 10 years from the original date of manufacture. However, the safe useful life of the valve may be shortened by certain environmental conditions and other factors. At times, replacement may be necessary much sooner.
What Happens When a PRV Fails? If a PRV fails and the water pressure in your home gets too high, it can cause a range of problems. These problems can include: Leaking appliances: High water pressure can cause appliances like washing machines and dishwashers to leak or fail prematurely.
Pressure Relief Valve – $20 to $200
If you notice that the valve is consistently leaking, it may mean that the tank's pressure is too high, or you might simply have a faulty/clogged valve. The cost of a new pressure relief valve is about $20, and repairs may total to $200.
Water pressure regulator replacement: $250 to $1,000. Pipe section replacement: $500 to $4,000.
The easiest way to know if a pressure regulator works correctly is to install a pressure gauge on each side of the regulator. You can measure the inlet pressure with a pressure gauge above the regulator, and the outlet pressure with a gauge below the regulator, as shown in the image below.
Low or Fluctuating Water Pressure
If your water pressure doesn't seem to be as strong as it once was or you notice a significant loss of pressure when you use more than one fixture at the same time, your pressure reducing valve may be bad.
What are the most common reasons a pressure regulator fails? The most common reason for pressure regulator failure is age. Over time, the regulator experiences stress from pressure fluctuations. It also experiences decay.
These mineral deposits accumulate inside of the valve body, leading to lower-than-intended home water pressure. In most cases, a plumber can resolve this issue by disassembling and cleaning out your regulator valve. Soaking the valve in a calcium and lime remover loosens up and dissolves unwanted mineral deposits.
Regulators must be subject to regular inspection and replaced every 5 year for non-corrosive gases. The body of the regulator is stamped for date of manufacture.
If the water pressure regulator is not adjusted properly, you could have either too much, or too little pressure in your faucet or shower. With the right tools, you will be able to adjust the water pressure regulator by yourself instead of calling in the plumber.
The ideal water pressure for a house will be somewhere in the range of about 45 to 65 psi. Anything higher than 80 psi can cause damage, and anything much lower than 45 psi may result in issues when you use your shower, toilet, dishwasher and other water-consuming appliances.
Normal water pressure is generally between 40 and 60 PSI. Most homeowners prefer something right in the middle around 50 PSI.
Normal psi for a home pipe system is between 30 and 80 psi. While you don't want the psi to be too low, it violates code to be above 80. Instead, you should aim for a psi that's between 60 and 70.
Most residential plumbing systems are designed to handle 40 to 60 PSI of pressure, with 80 PSI being the typical maximum and anything over 100 PSI being possibly detrimental to plumbing components.
The price of pressure reducing valves starts at around $50. You can expect to pay around $350 for a professional plumber to install a new pressure reducing valve.
Do All Homes Have a Water Pressure Regulator? No, and in some cases, you may not need one. Certain municipal supplies regulate their water pressure safely, but if that pressure runs above 80 psi, you'll want to protect your plumbing system by installing one.
When a pressure regulator fails, it could cause a sudden increase or decrease in water pressure. A common reason for failure is sediment build up in the valve, which could cause blockages, pump problems, and short cycling.
Excessive noise: If your hot water heater is rattling or emitting a high-pitched whistling noise, it's likely the sound of steam trying to escape the tank, which is a sign of far too much pressure pressing against the inner walls. This means the relief valve isn't doing its job and may need replacing.
Contaminants, like dirt, lint, rust, sludge, or even the misalignment of the valve can cause the pressure relief valve to stick. At this point, you might see that your system is above pressure, or you'll notice other pressure relief valves in the system releasing to make up for this valve's malfunction.