Lay out the tiles, or tile sheets if installing mosaics, on the counter to practice setting the tiles the appropriate distance apart from each another. Use tile spacers to help keep the rows straight, and leave a 1/8-inch gap at the bottom of the last row.
Leave a Gap
The tiles being installed on the backsplash should not actually touch the granite. Instead, install them approximately 1/8 inch above the granite. This small gap is known as an expansion joint. The expansion joint is crucial because houses may settle or move slightly over time.
As you apply sheets of tile, slide spacers under the bottom row of tile to create a gap that later will be filled with caulk. It's better to caulk, rather than grout, this bottom line to allow for cabinets shifting with normal floorboard movement.
Backsplash height should be all the way from the Countertop to the bottom of upper cabinets. I strongly suggest designing it like this, otherwise, it will look outdated like on the bottom image. Also, it protects water spillage much better if it is made all the way up to upper cabinets.
Now because we always recommend ordering overage, we suggest ordering at least 15% extra. 15% of 8 square feet is 1.2, so you should round up and order at least 10 square feet of tile total. That's it! You're ready to start ordering your tile!
Multiply the width and height to find the total area in inches, then divide by 144 to find the amount of square feet needed (amount of inches in a square foot). For example, if your space is 48″ (width) x 18″ (height) = 864. 864/144 = 6 square feet.
Multiply the tile length by the width to figure the area that one tile will cover in square inches. Divide the result by 144 to convert it to square feet. Then, divide the area you're tiling by the square footage of one tile to determine how many tiles you need.
When tiling a kitchen backsplash behind a stove, the best practice is to continue the tiles down the wall a minimum of one full course below the countertop height. This is done in order to prevent any visual discontinuity so you cannot see any untiled wall surface.
Do put a backsplash behind your cooktop and hood vent.
Grease, bubbling sauce, steam and other elements coming from your stove make for a messy cleaning job. Having a backsplash there will eliminate the headache.
The design should be used to balance out the light and dark shades of the other elements, so if you have light cabinets and countertops, you may want to choose a dark backsplash to bring more depth to the kitchen. If you have very dark cabinets or countertops, a light backsplash will help the kitchen feel fresh.
First, during tile installation, leave a small space between the tiles and the wood surface or countertop… no more than 1/8 of an inch.
When installing tile, leave a 1/8 inch (3 mm) gap between tile and cabinets.
The one spot where caulk, not grout, should be used is the seam between the countertop and the backsplash. The right material for that is a top-quality silicone caulk. The Tile Council of America suggests a 1/8-in. -wide caulk joint at the seam.
The standard tile size for a kitchen backsplash is 3 × 6 inches, however additional sizes such as 2 x 4 inches and 4 x 8 inches are also available.
What is the size of a typical backsplash? In most kitchens, there is a space of 18” between the overhead cabinets and the counters. Depending on personal preference, you can install a backsplash between 4-17 ⅞“ tall.
A countertop needs to be installed before the backsplash is put on the walls above the countertop.
Make sure there's at least 8 ”- 9” between the burner and the tile surface, or a back control panel on the stove to provide distance. Always follow fire codes when installing your stove.
“Subway tiles are classic and timeless, yet versatile, which is why they are so great. They aren't going anywhere in 2021 or beyond,” shares Erin Davis, lead designer at Mosaik Design & Remodeling in Portland, OR.
Ceramic tile is the most popular option for a kitchen backsplash. Ceramic tiles are incredibly versatile—they come in many shapes, sizes and colors and can be installed in numerous patterns.
It all starts with the alignment of your upper and lower cabinets. Hopefully they are lined up perfectly, as they are above, where the splash can run from the top edge of the countertop to the underside edge of the upper cabinet.
To begin, calculate the area of one tile in inches by multiplying the tile's length and width in inches. Finally, divide the calculated size of the space by the area of one tile. The result is the exact number of tiles required for the area.
Measure length of each wall including doors and windows. Find the total square feet of the wall(s) by multiplying ceiling height by total wall length. Subtract areas that will not be covered. (Standard doors are about 3 x 7 feet or 21square feet; standard windows about 3 x 4 or 12 square feet.)
How many 12×12 tiles do i need for 300 square feet :- for a 300 square foot tile project, you will need to install a total of 300 12×12 tiles.
Measure the length and width of the space and multiply. Just as you did before. For example, if you have a bay area that is 5 feet by 4 feet it would be 5×4=20 sq. ft.
For a 100 square foot tile project, you will need to install a total of 100 12×12 tiles.