How many amps is a dishwasher?

Author: Dr. Brittany Kuvalis  |  Last update: Sunday, August 31, 2025

How many amps does a household dishwasher draw? A household dishwasher typically draws an average of 9 to 12 amps of electric current during its operation. This energy-efficient range allows it to effectively clean your dishes while ensuring a balanced electrical load within your home's system.

Is a dishwasher 15 or 20 amp?

The standard and more common option is a 20-amp circuit. It uses 12/2 NM wire with a ground and provides extra power for larger and more conventional dishwashers. You also need to make sure that the circuit can handle the dishwasher's load without exceeding 80 percent of its amperage rating.

Can you use a 15-amp outlet for a dishwasher?

Dishwashers: typically, a standard 15-amp circuit using a 14/2 NM conduit can readily power an off-the-rack dishwasher. However, if you plan on adding garbage disposal unit to the circuit, you must use a 20-amp breaker and 12/2 wire.

How many amps does a dishwasher pull?

A dishwasher circuit typically requires a dedicated 15-amp or 20-amp circuit, depending on the specific appliance and local electrical codes. Most residential dishwashers have power requirements between 1,200 and 1,500 watts, which translates to 10 to 12.5 amps on a 120-volt circuit.

How many amps is a fridge?

Most refrigerators run between 3 to 6 amps, with that said, a refrigerator can spike at peak usage up to 15 amps. It's best to take into consideration worst case scenarios. You should have refrigerators and freezers installed on a 15-20 amp dedicated 120 volt circuit.

Dishwasher tripping circuit breaker. No fault code

How many amps is a microwave?

A typical household microwave might use around 7.5 amps. However, larger microwaves (like those over 1,200 watts) can draw more, around 10-15 amps. This is because most household microwaves used in kitchens across the United States are in the 600-1,200 watt range.

How many amps does a TV pull?

The average TV typically draws around 0.3 to 1.7 amps of current. The amp draw of the TV can vary based on factors such as the TV's efficiency, screen size, technology (LED/LCD, OLED, QLED), and additional features like smart capabilities and built-in sound systems.

How many amps does a dryer use?

Most clothes dryers use between 7.5 and 30 amps and connect to a 240-volt outlet. How much you run your clothes dryer has the biggest impact on how much electricity it uses over time, and households have all sorts of laundry routines.

Do dishwashers need their own breaker?

When installing a dishwasher, the circuit should be a dedicated 120/125-volt, 15-amp circuit.

Can a dishwasher be plugged into a normal outlet?

The simple answer is that it depends on the model of the dishwasher. Most dishwashers come with a power cord plugged into an outlet, but some models must be hardwired. Definitely consult your dishwasher owner's manual or installation instructions.

What size breaker for dishwasher?

Requires a 120 volt individual, properly grounded branch circuit with a 3 prong grounding type receptacle, protected by a 15 or 20 amp circuit breaker or time-delay fuse.

How many amps does a garbage disposal use?

Most residential garbage disposals require a circuit of 15 amps and 120 volts. However, it's important to note that some higher-end models may require up to 20 amps. Sepura only requires a standard wall plug (AC 100-240V ~1.6A 50-60Hz), so it works great with standard home circuits.

What size amp do I need for a dishwasher?

A 15A circuit is more than sufficient if it is dedicated to a dishwasher alone. However, if you're adding other appliances or using a much larger dishwasher, then you should opt for a 20A breaker.

Does a dishwasher have to be on a GFCI?

Kitchen dishwashers installed in dwelling units require GFCI protection whether hard wired or cord and plug connected. Code Change Summary: A new subsection was added regarding dwelling unit kitchen dishwashers. Now, outlets that supply dwelling unit kitchen dishwashers must have GFCI protection.

What appliances require 15 amps?

The electrical current, measured in amperes (amps), determines how much power can flow through the outlet at one time. 15-Amp Outlets: These outlets are the most common in homes. They are suitable for lower power devices like lamps, televisions, and small kitchen appliances.

Can a dishwasher and fridge be on the same circuit?

Can a refrigerator and dishwasher share a circuit? Provided the circuit has a high enough current rating for both on their startup peak at the same time then yes, they can share a circuit.

Is a refrigerator 15 or 20 amp?

However, they can experience sudden spikes, which can cause them to run at around 15 amps. As a result, a refrigerator must run on a circuit that is capable of handling these occasional spikes. The best course of action is to run the refrigerator on a dedicated 20 amp, 120-volt circuit.

What would cause my dishwasher to trip the breaker?

The problem may be caused by, quite simply, a faulty component. This can include everything from the motor, to the suppressor, to the heating element, to the main power switch and so on. One way that this can be narrowed down is to observe when the trip happens when the machine is on.

How many amps is a refrigerator?

Introduction. On average, refrigerators consume between 300 and 800 watts of electricity, depending on the age of the model. Most refrigerators use between 3 and 6 amps and operate at around 120 volts.

How many amps does an AC use?

Central air conditioners typically require higher air conditioner amperage due to their larger cooling capacity. A 2-ton central AC unit may draw around 15-20 amps. A 3.5-ton unit may require 25-30 amps. A 5-ton unit may need 30-40 amps.

How many amps is a stove?

Generally, an electric stove uses around 20-50 amps, depending on the size and type of the stove. A regular stovetop range draws 48 amps, while a typical oven requires around 33 amps. It is important to ensure that your circuit can handle the load of the electric stove before plugging it in.

How many amps does WiFi use?

Generally, Wi-Fi routers use between 5 and 20 watts (W) of electricity, depending on the model. Most Wi-Fi routers use about two amps, connect to a 120-volt outlet, and pull somewhere around 5 to 7 volts.

How many amps does a garage door opener use?

The electrical requirement for a Genie garage door openers is a standard 120V outlet. Unless building codes require higher standards, we recommend using a dedicated 15 amp breaker for a single opener*, and a dedicated 20AMP breaker for 2 or 3 openers.

Previous article
How do I get my spider plant to grow babies?
Next article
What are the cons of steam mop?