Although it's generally recommended that all the pool water undergo filtration every 24 hours, the pump does not need to run all the time. A proactive, productive and energy-saving maintenance activity is to remove the debris floating on the pool surface with a hand-held skimmer.
When you cannot circulate water, the water stagnates and chemicals tend to settle out in the lower levels of the pool. It makes it almost impossible to add any chemicals because you don't have a good way to mix the water.
If your pool is in constant use, you may need to run the pump for up to eight hours per day, frequently checking the water clarity and chemical balance. Leaving the pool closed all summer is a guaranteed way to end up with a green, smelly mess and permanent stains or damage to the pool surfaces.
Every pool must turn over at least once a day, so most pool pumps should run approximately 8 hours a day. But here's the thing: you don't have to run your pool pump consecutively. You can choose to run it for three hours in the morning before you leave for work and another 5 hours in the evening.
It may be cheaper to run the pump at night, but honestly you should run it 1 hour a day per 10 degrees of temperature at least, and it should be during the day. Running the pump at night should only be when you are doing a major chemical treatment such as algae clean-up.
It's best to run your pool pump during the day
Not only does sunlight give fuel for algae to grow, it also destroys your pool chlorine and this is why you should always run your pool during the day!
As long as it runs for at least 8 hours in every 24-hour period, you're good to go. Overall, the lessons learned today is you should run your pool pump an average 8 hours a day to properly circulate and clean your water. The pump should push your entire pool in gallons in this 8 hour period of time.
One of the most significant consumers of energy in homes with swimming pools are pool pumps, which keep pools clean by circulating water through filters. Pool pumps can consume 3,000 to over 5,000 kWh per year.
That means that the total volume of your pool water will filter through your system 2 to 3 times per 24-hour period. For a residential pool the water should turn over at least once per day. So, you can feel confident if you decide to run your pool pump for 12-hours a day.
A good guideline is 8-10 hours a day. On the cooler days and early and late season, you can cut the run time down to 4-6 hours because there is usually less swimmers and cooler water requires less chemicals.
Depending on the size of your pool, we still recommend the pump run 8-10 hours per day during the hottest summer months and at least 6 hours per day during the winter months. ... It is also bad for the pump motor not to run. Running the motor heats it up and evaporates moisture/humidity that is harmful to the motor.
I think the answer to your question is about 3-6 days. The problem is that the chlorine that you need to keep the bacteria in check is used up more quickly as the temperature rises, the activity increases, and as sweat and other body stuff is put into the pool.
Not running the pump 24/7 is also a sanitary issue, and is the primary cause of a murky pool. The moment you turn off your water pump, debris, algae and bacteria start to build up, which can eventually lead to cloudy or green water. Your pool is meant to be a sanctuary, a place of relaxation and enjoyment.
The average cost to run a pool pump is about $40 per month.
How much does a pool cost to run? The average swimming pool will cost between $660 and $1,000 to run annually – consuming between 2,000 and 3,000 kilowatt hours of electricity. That's about $23 each week!
Chemicals that you add to your pool while the water is circulating don't need to be recirculated; they will stay mixed even if you don't pump the water continually. Although it's generally recommended that all the pool water undergo filtration every 24 hours, the pump does not need to run all the time.
We recommend that our customers run their pumps rain or shine UNLESS we have an electrical storm. In that case, lightning could strike an outside circuit, which could damage your pump and other equipment. If you're worried about lightening, turn the pump off or shut off the breaker.
Run the circulation system one (1) hour for every 10°F of air temperature if a single-speed filter pump is installed. Example: If it is 100°F, the pump should run 10 hours a day minimum. Of course, if the pool is full of algae or a major weather event has occurred, the pump may need to run 24-hours a day.
Depending on the size of your pool, we still recommend you run your pump run at least 4-6 hours a day during the fall and winter months. The daily cycle can be divided into multiple cycles, but each cycle should be no shorter than 4 hours, for all the water to pass through the filter at least once.