If you are interested in stationary panels, you will want your curtains to be long enough to lightly brush the floor, but not so long that they bunch up in a pile. A good rule of thumb is for your curtains to break anywhere from a ¼” to ½” from the floor, similar to a break in pant legs on your shoe.
You should aim for your curtain hem to be about 3/8" to 1/2" above the floor. Not only is this an easier length to measure for, but it also makes it simple to vacuum and sweep. It's a great option if you plan to open and close your curtains a lot since you won't need to rearrange them each time.
A common rule for displaying curtains properly says the curtains finished width should be at least 2 times the width of your window (if not more - sheers can be 3 times the window width) to achieve a look of proper fullness.
How Wide Should Curtains Be? To ensure that panels look ample and drapey when closed, they should have a combined width that is 2 to 2½ times the width of the window. Exceptions: If you're hanging curtains just to frame a window and don't intend to shut them, you can round down to 1½ times the width.
As a general rule of thumb, curtain width should be two to two-and-a-half times the width of the window. Curtains are typically sold as pairs, but you may need to double up depending on the size of your window.
The answer to this question is important because it can affect the way we do our decorations. Yes, curtains should be long enough to touch the floor. With a few exceptions, the longer the curtains are the more stylish and elegant it will look. This is why most standard ready-made curtains are lengthy.
As a general rule, drapes will be open during the day, so make sure the curtain rod extends at least four inches on each side of the window's inside frame. To create the illusion of a wider window, extend the rod up to 10 inches beyond the window's frame.
Yes, They should! The length of the curtain determines the height of the curtain rod. Therefore, even if you buy curtains that are 84 inches long, if the curtains hang from the rod without rings, the rod must be approximately 84 inches from the floor to enable the curtain to touch the floor and avoid the awkward look.
For curtains that are way too long, you may have a lot of excess fabric left. You can trim this extra material at the end, but if you don't want to cut the curtains, make 2 or 3 folds so the excess material is tucked in neatly.
If you have the space between the top of your window frame and the ceiling or crown molding, though, you should hang the rod over the window. I like to go 3 to 5 inches down from the ceiling. Doing this visually extends the length of your wall, making your ceiling look higher.
Floor length: Long curtains that go from above your window frame all the way to the floor to create a traditional, formal look. Typical curtain length for this style is 84 to 96 inches; these curtains will fall about 1/4-inch above the floor. They are ideal for living rooms, bedrooms and dining rooms.
Hanging long drapes on a short window is one of the easiest ways to increase the importance of the window and bring it into proportion to the room. Short drapes on a short window call attention to the size of the window and reduce the significance of the room, window and drapery style.
Drapes may stretch. Fabric is made of threads woven together, and there is no glue holding these threads in place. Knowing how the fabric may react after hanging will help you choose fabrics that should not stretch.
Making Your Room Look Larger or Smaller with Curtains
High-hanging curtains with long vertical stripes create the illusion of height, which is excellent for low ceilings. However, short curtains and horizontal stripes shorten your wall height and make the room appear smaller.
While fashion once dictated a “flood level” bottom line for curtains—one that hung just past the window sill, short enough that it would not get wet in a flood—today, style calls for curtains to either hang down to within ½-inch of the floor or even puddle slightly.
Short curtains are typically only used when long curtains are unrealistic (such as when a radiator, the bed headboard, or some other object would interfere with the curtains). In addition, long curtains provide a better aesthetic and can make the room appear bigger, especially when hung higher than the window frame.
Standard curtains come in three lengths—84 inches, 96 inches, or 108 inches. "Generally, you want to stay away from the 84 inch standard curtains unless you have very low ceilings. They don't look right in most scenarios and end up being an awkward length," says Curtis.
In Closing. For a 9-foot ceiling, 96-inch curtain panels are typically a good fit. This allows you to hang curtains that reach the floor, with the rod placed one foot from the ceiling. If you prefer curtains that pool on the floor or curtains that hang higher, just pick the next size up.
Most curtain rods are available in sizes of 4 to 12 feet long, while other curtain rods come in sizes up to 15 feet long. However, the best way to buy extra long curtain rods is to purchase two or more rods and join them together with a connector screw or internal rod splice. Add support brackets where the rods join.
When you buy them in stores or online, there are two standard lengths: 84 inches and 95 or 96 inches. The length of the curtain dictates the height of the rod. If you buy 84-inch-long curtains, the rod must be mounted roughly 84 inches from the floor if the curtains hang from the rod without rings.
When hanging curtains, it is important that the curtains are the right length. Curtains that are too short make the room look short, stubby and awkward. The cut the length of the wall, making both the window and the room look smaller.
In this case if you hang a curtain too high it could look a little off, especially if there is a lot of bright light coming through showing where the actual window is. In that case you should hang them about 8 inches or less above the window frame.
Place the curtain panels on top of one another, right sides together. Then pin the vertical edges you unpicked together. If your fabric is quite thick you may opt to clip the two panels together instead. If you're working with patterned panels check that the pattern matches before and after pinning.