Acclimation of wood flooring begins with proper storage at the job site. It should be cross stacked and spaced to encourage air circulation around the boards. Most manufacturers recommend materials acclimate for a minimum of three days with no maximum suggested.
Can Hardwood Flooring Acclimate in the Box? It is possible to acclimate hardwood flooring in the box, but it will take much longer due to the lack of air circulation.
If hardwood planks are not allowed to acclimate to their environment before installation, issues like cupping, warping, and gapping can arise.
Always acclimate your solid or engineered hardwood flooring to the home before you install it. Acclimation of traditional 3/4 inch solid hardwood, either unfinished or factory prefinished, is critical to the success of the floor.
If you don't acclimate laminate flooring before installation, you risk the planks compressing or expanding from its installed position as it adjusts to the current humidity and temperature of the room. This may result in buckling or gaps at the joints if the planks expand or contract.
Your laminate flooring can be stacked, but lay it as flat as possible. The longer you can leave the laminate flooring the better, but a minimum of 48 – 72 hours is advised for best results.
Like almost all materials in the home, Pergo flooring expands and contracts due to changes in temperature and humidity. You must allow unopened cartons of Pergo flooring to lay flat in the room where they will be installed to acclimate for 48-96 hours, depending upon climate, before beginning installation.
How long do I have to wait to use my room after new floors are installed? We recommend waiting 6 hours before walking on your new floors in socks. After 24 hours you can walk through with shoes on. Allow 48 hours before setting furniture and returning pets.
The safe temperature range for hardwood floors is typically between 60 and 80 degrees Fahrenheit.
Felt paper is installed under hardwood flooring to provide an extra layer of moisture protection and also to dampen sound. You will need to install it under your wood floors if a padding is not already attached to the hardwood planks. Many models of hardwood planks have dampening foam already attached.
The manufacturer recommends the following for floors finished with Bona Traffic HD: The curing process takes approximately 3 days (80% cured after 1 day, 100% after 3 days). The floor may be walked on after 24 hours, but remains susceptible to scuffing or marring until completely cured.
You should really store your hardwood flooring in a controlled environment, never a garage or basement. If the hardwood is being store above 50% humidity it will take in a ton of moisture and expand this will typically happen in the summer months when humidity is at it's highest.
Wood flooring material needs to acclimate (adjust) to the moisture and temperature conditions of the installation environment for at least three days (72 hours) before it can be installed.
If you have a concrete subfloor, then you should glue your hardwood down, if you have a wooden subfloor then you can choose either method of installation. However, if you are planning on fitting your hardwood floor to joists, then you will need to secret nail them into place.
Moisture in Spring and Summer
Fall is a perfect season for hardwood flooring installation because the cool, crisp weather exposes your hardwood flooring to less moisture.
These days, Pergo is owned by Mohawk and, as you might imagine, they also make non-toxic laminate flooring. Pergo's laminate, on the other hand, is certified as low-VOC with a Nordic EcoLabel, which is similar to FloorScore and GreenGuard certification.
When Vinyl is not given the chance to acclimate it will expand or it will contract. If the vinyl comes from a very hot environment and is placed into a much cooler environment contraction will take place. This will cause the floor to start to pull apart, creating gaps between your planks.
Never install your new laminate floor as soon as the cartons arrive at your home. Any new laminate floor product, including Swiss Krono, needs to sit in your house for at least 48 hours in the room it will be installed in order to acclimate or to become accustomed to a new climate or conditions.
Acclimation of wood flooring begins with proper storage at the job site. It should be cross stacked and spaced to encourage air circulation around the boards. Most manufacturers recommend materials acclimate for a minimum of three days with no maximum suggested.
A two-person team of installers is typically able to complete 750 to 1000 square feet of flooring each day. If the job size is up to less than 1000 to 1500 square feet, the installation might take less time. Also, installation will take less time in case the job site is free of any obstacles and is wide open.
Storage Method
Therefore, rely on environmentally-controlled storage solutions for hardwood flooring to keep it in good condition. Store hardwoods flat on the floor away from walls. Elevate wood off the concrete ground by stacking it on top of a level and stable object. Monitor the wood's condition regularly.
It may also be necessary to access the floor from below for faster drying. Effective drying of a hardwood floor is a slow process. It will sometimes take seven to 10 days for the floor to release enough water to halt the forced drying process.
No. By all means, avoid sleeping in the house after refinishing surfaces using oil-based products. Oil-based polyurethane emits a strong smell that's uncomfortable to be around. It is neither safe nor smart to expose yourself and others to such a highly toxic environment.