We recommend that you have your asphalt driveway resealed every 2-3 years at maximum. Waiting any longer could result in faster deterioration of your pavement. And doing it too often (i.e. annually) could result in chipping and flaking.
For it to be successful though, you need to apply the first coat of sealant within 12-18 months after asphalt installation, and then again every 2-3 years. Any more frequent than this and your driveway may begin chipping or flaking, but any longer than this and your driveway could deteriorate.
Once the asphalt cracks, water and/or car fluids can seep in and create pools of water underneath the surface. This will lead to more cracking and further damage. Sealcoating will protect against fading, and can even improve the appearance of your asphalt.
On average, every 2-3 years. The major factors that affect how the sealer wears is traffic flow, UV ray exposure, water flow and settlement, salt, snow plows, and other winter weather conditions.
Typically, sealcoating is recommended every 3 years to provide adequate pavement protection as well as attractive curb appeal for your commercial property or home.
How often do I need to reseal my asphalt driveway? We recommend that you have your asphalt driveway resealed every 2-3 years at maximum. Waiting any longer could result in faster deterioration of your pavement. And doing it too often (i.e. annually) could result in chipping and flaking.
Sealing concrete yearly can lead to more hairline cracks, so if you have a concrete driveway, you should consider resealing it every five years. In addition, sealing an asphalt driveway too soon may trap oils within the asphalt, resulting in a driveway that is too soft or flexible.
How many coats of sealer should be applied? Low Traffic such as a typical home driveway, 1 coat is sufficient. Moderate Traffic on a parking lot, 2 coats with a third coat on the entrance and exits. Heavy Traffic 2 coats with a third coat on all travel lanes and roadways.
The best time to sealcoat your driveway is during summer when the temperature is above 50 degrees Fahrenheit. It's not advisable to seal coat in the winter as the colder season will negatively affect the performance of the sealer. The sealer may not bond with the asphalt or will not cure correctly.
Sealcoating is not designed to be an asphalt crack filler, it is made for sealing the surface and protecting it from the elements such as UV light, salts and oils. It is not flexible enough to fill a crack without re-cracking and it does not have adhesion quality's that Asphalt Crack Filler has.
While we still recommend those with cracks developing try to get their asphalt seal coated before it gets too cold, spring is really the best time for seal coating. It means your driveways and parking lots look great for the entire year, and warm spring weather is the perfect temperature for a well-set coat.
The Drawbacks of Seal Coating
There are some drawbacks to sealcoating, however. One is that it can be messy and difficult to apply evenly. It's also important to note that sealants will not repair significant damage to your driveway; they will only protect it from further damage.
Using a squeegee is more hands-on, and the workers will know exactly what spots they've hit and what they've missed. They will be able to apply a thicker layer of sealer as well. Ultimately, spraying is better for large areas when time is short, and squeegee is better for smaller lots and a thicker application.
Industry standards recommend that you wait one year or go through one winter before you seal coat a new driveway. How often should I seal coat my driveway? Industry standards recommend every two years; allowing the sealer to wear away before you reseal the driveway.
Coal Tar based sealers have long been the gold standard for asphalt sealing durability.
Rain can wash away all of the hard work that you put into your driveway. The sealer will be washed away by the rain if you don't wait long enough for it to dry.
Make sure there's no forecast for rain for at least three days. You want the driveway to remain dry for at least one day before and one day after applying each layer of sealant. Opt for late spring, summer, or early fall to do this project.
The best temperature range for applying sealcoat is between 55 and 90 degrees Fahrenheit. Ideal temperatures are those that start around 70 degrees Fahrenheit in the morning and increase throughout the afternoon.
In some cases, a residential driveway will only need one coat of sealant. However, if the asphalt sealcoating has never been sealed before, it may take a second coat to give it the rich, deep finish that most homeowners prefer. A second coat may also be indicated if there is some “unraveling” of the asphalt.
Coverage rate:
Total of 2 coats – average coverage around 50 square feet per gallon (or 5 square yards).
1. APPLYING TOO MUCH SEALER OR THE WRONG KIND OF SEALER. While slathering seal coat over asphalt in a thick layer can be tempting, a “more is better” approach is detrimental to the pavement beneath. Too much sealer can lead to premature cracking, which will shorten the lifespan of your driveway.
Applying two coats of any sealer will dry and create a better finish much better than one thick coat. These sealers are water based, and they cure and form a film primarily during the evaporation of water from the coating. A thin coat will evaporate much faster and create a single uniform layer.
There Are Cracks or Holes in the Surface
Another sign that your driveway needs to be sealed is cracks or holes in the surface. These can be caused by several things, such as tree roots, weather damage, or normal wear and tear. If you notice any cracks or holes, it's important to have them repaired as soon as possible.