In nearly all cases, the big answer is yes — you should attach your vanity to the wall. What's more, the vanity should be flush against the wall, with no space between the back and the wall itself. The reason for this is to hide and protect your plumbing.
Step 2: Measure the Width of Your Space
To accommodate a single-sink vanity, you'll need at least 18" of width available. For a double-sink vanity, you'll need at least 48" of width available. Remember that the vanity top will typically add ½ to 1" on either side of the vanity width.
No, a bathroom vanity does not need to be attached to a wall. However, there are some benefits to doing so. For one, it can help to prevent the vanity from tipping over.
Before installing your bathroom fixtures, keep this general tip in mind: big fixtures, such as toilets, bathtubs, showers, and vanities, should be placed at least 30" apart from each other, a wall, or another feature.
One of the best ways to do that is to use silicone caulk. Another way is to use a backsplash or backer rod to ensure the vanity is flush against the wall. Sometimes, the design of the vanity creates a gap, and you cannot close it unless you use other means apart from moving it close to the wall.
Plan a clear floor space of at least 30 inches from the front edge of all fixtures (lavatory, toilet, bidet, tub, and shower) to any opposite bath fixture, wall, or obstacle. Code Requirements: A minimum space of 21 inches must be planned in front of the lavatory, toilet, bidet, and tub.
The typical comfort height for the positioning of a floating bathroom vanity unit can be anything between 25-30 inches from the floor, or 635 to 760mm.
Bathroom vanity units do not need to be attached to a wall, however, wall hanging vanity units are the most popular design on the market. And in small bathrooms in particular, space might dictate that the bathroom vanity unit will have to be attached to the wall.
If you're wondering if you should get a bathroom vanity backsplash or not, you're not alone. Many homeowners wonder the same thing. And the answer is, if you don't have a pedestal sink that sits against your bathroom wall, you'll likely benefit from having a bathroom vanity backsplash.
When preparing to install the light fixtures and mirror above a bathroom vanity, the easiest way to start is with the mirror, as you want to center it on the wall. Standard spacing for a vanity mirror(s) is 5-10 inches from the vanity sink to the bottom of the mirror.
Measure the depth of the available space for bathroom vanity
A helpful tip is to open the door, mark it with a coin and take your measure from that point. If space is at a premium, try to leave a minimum of an inch or two between all of the bathroom items. Bathroom vanities typically have a depth of 18 to 22 inches.
Small-Bathroom Vanity Placement
A recessed cabinet installed into a sidewall is a smart way to capture space that is typically overlooked. Offsetting the sink in the vanity is a clever option for creating a larger area of open counter space.
If a window is available, position the vanity nearby to capitalize on natural light. If you're relying on artificial light, install fixtures on either side of the mirror—this will illuminate your face more effectively than overhead lighting alone.
For a traditional cabinet style vanity, the cabinet needs to be tight against the wall, so baseboards happen after the cabinet is installed. For the new "furniture" style vanity cabinet, if there is room for the base behind the legs of the cabinet, then do the base before cabinet installation.
'A mirror or mirrored wall could be used behind the vanity to add visual depth, as well as a waterproof solution,' says Rob. 'Or you can avoid a backsplash altogether by using a washstand with one already built-in.
Plumbing supply lines for sinks are usually located on the rear wall under the sink or on the side of the cabinet wall under the sink, though sometimes they're routed through the floor directly under the sink in the center of the vanity or cabinet. Any of these locations is acceptable.
Pro: Easy to clean the space underneath
Since wall mounted vanities are not stuck to the floor, owners have full access to the space beneath. A quick sweep or vacuum and that's it! There are also fewer nooks and crannies for dirt to collect, making maintenance easier than ever.
If your vanity is up against a wall you will also need to apply a bead of caulk to seal the gap between the wall and vanity top to prevent any water leaking down.
However, if you have a range of heights in your family, choosing an average is best. For example, technically speaking, the optimal vanity height for men is between 34 and 36 inches, and the optimal height for women is between 32 and 34 inches. The average number of 34, then, fits the bill for both men and women.
Wall-mounted, floating vanities are almost always 34” or 36” counter height.
Vanities mounted on a wall give an illusion of space
As wall hung vanity cabinets are mounted off the floor, they offer the illusion of more space, making the smaller bathroom feel bigger. They open up the room and free up the floor underneath the cabinet. See how nice they look by adding a light under the cabinet.
We have a 15-15 rule in our school, where in the first 15 minutes and the last 15 minutes of class you can't go to the bathroom, and most of our periods are only like 50 minutes. That's like 20 minutes to go to class, and the middle 20 is usually the most productive.
The 20-20 rule states: students are not allowed to go to the restroom during the first or last 20 minutes of every period, unless in an emergency situation.
According to these rules, males should use restrooms as quickly as possible, maximize physical separation from each other when using urinals, flush urinals when they contain concentrated urine, avoid stalls with unflushed toilets, and avoid eye contact and communication with others.