Concrete performs quite adequately if it is never sealed at all, but applying a good quality sealer every few years will extend its life and keep it looking good.
Pros: Why You Should Totally Seal a Concrete Patio
Improves Ability to Repel Moisture – A sealer closes the absorbent pores of concrete, keeping any moisture at the surface. This helps prevent spalling that is often caused by freeze-thaw cycles. It also helps prevent the growth of mold and mildew on the patio.
Left unsealed, the colors will fade, water marks may be an issue, and stains can penetrate leaving ugly oil spots where the service guy left his old jalopy parked on the driveway. It's pure and simple, the job just won't last without a good sealer.
Sealing your concrete not only ensures your concrete surface is protected, but that it is long lasting. It should also be noted that compared to the cost of replacing a concrete surface, sealing is relatively inexpensive and easy to do–definitely worth a long lasting concrete floor, patio, slab, or driveway.
Wait at least 30 days before sealing a new concrete surface—whether indoors or out—so that it has time to completely cure first.
Concrete can be described as a hard sponge that soaks up oil and water-based spills. Easily marked by tires and outdoor elements, it is important to seal the surface, so it looks beautiful year-round. The other benefit to sealing concrete is improved cleaning and maintenance.
While the advantages outweigh the negatives, there are some disadvantages that you should keep in mind before sealing your concrete driveway. Sealant can make the surface slippery. Sealants tend to dry down with a glossy or semi-glossy sheen that can be quite slick, especially when wet.
If you have cracks in your concrete, sealing won't do anything for those. You'll expend money and effort on something that you might rather replace before too much longer. Sealers fade. The seal on your concrete will fade over time, especially in high-traffic areas.
Outdoor concrete sealers are not only worthwhile but necessary. Experts who recommend having a concrete surface sealed are doing their customers a big favor. Without this extra layer of protection, concrete will absorb moisture and may begin to crack, spall, flake, and discolor, among other things.
After 18-24 months, your paving will be ready for a fresh top-up of sealer. It's important to use the same product to get the same results, but the process is much the same. If you have opted for Black Limestone, the time limit is a little different - make sure you have a read up on the material here.
It's Never Too Late …
Sealing your garage floor might not be possible if you have moisture in your garage. This is typically the only scenario where we don't recommend sealing right away, mainly because you should deal with the cause of the moisture first. It could be due to a plumbing leak or a drainage issue.
Penetrating sealers are a great choice for driveways, sidewalks, patios, and other outdoor locations because they provide excellent protection against harsh weather. Penetrating sealers protect exterior concrete surfaces against freeze-thaw damage and corrosion.
“Do I need to seal my pavers?” The short answer is Yes. Paver sealant is an important maintenance tool to keep paver patios, walkways, driveways and pool decks looking as beautiful as they day they were installed.
Stamped concrete is the classic among decorative concrete finishes for patios. For decades, stamped concrete (also called textured concrete) has been incredibly popular for outdoor patios, pool decks, and sidewalks. Concrete is imprinted using special urethane tools.
Acrylic Concrete Sealers: Acrylic sealers last 1-3 years before they need to be re-coated. Epoxy Coatings: Epoxy coatings last 5-10 years before they need to be re-coated. Urethane Coatings: Urethane coatings last 5-10 years before they need to be re-coated.
If you want to clean your concrete, there are a few things to keep in mind. You should use a pressure washer or other high-pressure water source to remove stains such as oil and grease. When using a pressure washer, be careful not to damage the sealer on your driveway by putting too much pressure on it.
Can Sealing Prevent Cracks on Concrete Surfaces? Concrete sealing can stop most types of concrete fractures. This fact is especially true if the crack is a result of poor-quality work in the concrete mix or site preparation. However, sealing can prevent future damage that may start from the top layer of the concrete.
Solvent base sealers tend to over darken concrete stain, looking as it does when saturated wet with water. Water base sealers such as Clear Shield, makes the concrete look as it does when damp with water, not saturated wet but not dry either.
Sealing concrete is not a requirement, but most experts will recommend it depending on the placement and environment. Flat surfaces benefit the most from concrete sealant since it dries evenly and seeps into the small crevices.
As we noted earlier, concrete sealers produce a very smooth surface on top of the concrete once it has fully cured, which gives your driveway valuable resistance to water, oil, and stains.
In order to properly seal your concrete, then, you must clean the surface of the substrate before applying a concrete sealer of any variety. The easiest and most effective way to clean the concrete will vary depending on the condition of your concrete and whether it has been treated with chemical stains.