Locate a measuring cup and pour half a cup of dish soap into your toilet. Give your soap about five to 10 minutes or enough time to travel down your drain to reach your clog. Then, add hot (not boiling) water and let it sit. Dish soap serves as a lubricant, greasing your clog and dislodging debris.
Start by slowly and firmly pushing down to create a seal and then pulling up sharply to dislodge the obstruction. When you pick up the pace, you will notice the water starting to drain. It usually takes at least 15 minutes to unclog a toilet. When draining, some water may dislodge and push forward the blockage.
Make your own drain cleaner by pouring one cup of baking soda and two cups of vinegar into the toilet and adding a half gallon of hot water. Dish soap can also help loosen some obstructions. When using either method, allow the solution to sit overnight and then flush the toilet to see if the obstruction has cleared.
You may just be using it incorrectly. Do this: Next time you have a clog, use your plunger like this: Ensure the flange lip is unfolded. Get a good seal on the toilet drain (that is, make sure you're covering the entire drain or you won't have enough pressure to loosen the clog.)
The longer you leave a clog, the more opportunities there are for the clog to get worse. The most water-soluble parts of the clog will dissolve, and the rest will fill in the gaps, making the clog worse. There is also the possibility that human error could come into play.
Unblocking your toilet using washing up liquid
Start by squeezing in about half a bottle of the washing up liquid, which will then sink to the bottom of the toilet bowl. Next, pour in the bucket of water to flush the washing up liquid down the u-bend. With a bit of luck, this will clear the blockage.
When you have a clogged toilet, but you don't need to use it right away, you might wonder if you can just wait and let the clog sort itself out. Will a toilet eventually unclog itself? It sure would be nice, but it's fairly rare for a toilet's clog to clear up after a few hours.
Sometimes clogs cause a toilet to slowly drain its bowl. You cannot plunge a toilet that is empty, so if there is no standing water, use a cup to fill the toilet with water from your sink. If the toilet is empty, take the opportunity to use hot (but not boiling) water, as high temperatures can help clear clogs.
Attempting to force a clog through a toilet with a plunger can often make the problem worse. Instead, create a seal and slowly push down on the plunger before pulling it back sharply. The suction can help pull the clog back up toward the bowl, breaking the blockage and allowing gravity to take over.
When you are using a baking soda and vinegar solution to clean out your drain, you are actually causing the rubber and plastic that are used for the drain's pipes to be eaten away by the mixture. Over time, this rubber and plastic will break down, causing the drain to become even more blocked.
If you find yourself with a clogged toilet, you don't have to call the plumber immediately. The first thing you need to do is turn off the toilet's water supply. This will stop the toilet from overflowing.
You can also pour vinegar down the drain on its own.
Pour about 1 cup of vinegar down your drain and let it sit for 30-40 minutes.
Can you leave baking soda in the drain overnight? It is safe to leave baking soda (and vinegar) to work overnight to unclog a drain.
People should still flush their toilets at least once a day. "Things like to grow in urine and after a while the chlorine will inactivate in the toilet bowl water. It will being to bubble away and things will begin to grow. The odor will increase so it can get disgusting, smell bad and stain your toilet," he said.
Then pull up sharply to disturb the clog and loosen it. Continue vigorously pushing and pulling until the water begins to drain. It may take 15 to 20 cycles before the toilet unclogs. Be patient.
Most toilets meet the testing specifications after flushing them once or twice. Furthermore, based on Department of Energy data, they calculated that the standard 1.6 gallon toilet costs 1.3 cents to flush.
If your toilet isn't flushing all the way, it's most likely because of one of these problems: The water level in your toilet tank is set too low. Problems with your flapper. A clog in the toilet, flange or drain.
Studies have shown that the average bowel movement takes 12 seconds. Sometimes it does take longer, however, so at maximum, you should not spend more than 10 minutes on the toilet.