Solid surface can only be drilled with a router, hole saw or spiral drill bit. Do not use an auger-style bit or sabre saw... it will microfracture the material which can lead to widespread cracking!
Drilling the Holes
A diamond drill bit for granite, a diamond hole saw, and a diamond saw blade are requisite tools for cutting the slab. Using diamond-plated blades and bits will give a very clean and precise cut.
Keep nail polish remover, bleach, detergent, permanent markers or inks, and oil soaps away from your Corian® Quartz.
The inserts should be installed according to the manufacturer's instructions. Screws should never be inserted directly into Corian® solid surface.
Solid surface can only be drilled with a router, hole saw or spiral drill bit. Do not use an auger-style bit or sabre saw... it will microfracture the material which can lead to widespread cracking!
In terms of durability, Corian tends to be more easily damaged by hot surfaces than natural stone. It's also more prone to scratches than surfaces like quartz and granite. Laminate has been a widely used countertop material since the 1950s.
Corian is a branded name used in reference to solid surface countertops. These surfaces are a step up from laminate but still lack the durability and aesthetics that would allow them to compete with natural stone such as quartz. This is one of the primary reasons Corian offers poor resale value compared to quartz.
Use the recommend DuPont™ Joint Adhesive, DuPont™ Joint Adhesive 2.0, or Corian® Joint Adhesive color for the best color match. Never attempt any seam that is not a proper fit and is not thoroughly cleaned and color-matched.
Over time Corian can crack — sometimes even splitting at the seam where it joins to the sink or to other pieces of countertop.
Diamond-tipped drill bits.
Countersink drill bits are used to ensure that flat-headed screws sit flush against the material using the hole drilled. The countersink bit drills a conical hole so the screw head is positioned in line with or just below the surface of the material being worked on.
Slow, controlled cuts will yield the best results. Use a saw for long cuts – If you need to make a long cut in Corian, it's best to use a hand saw or power saw equipped with a fine-toothed blade. This will help prevent chipping and cracking.
Yes, you just oversize the hole to the point where the threads are just catching, and allow the epoxy to prevent them from spinning. I've done it in stone many times, and Corian is softer. Corian is also epoxy based ( more or less) and should give the epoxy good "purchase".
A: Hello, Gorilla Epoxy will work on Corian. We recommend roughening the surface to provide some texture for the glue to adhere to.
Never put hot pans, in particular cast iron pots or hot casserole dishes directly on a Corian® top or in a sink. Such heat can damage any surface. Preventing Other Damage Be aware of what your Corian® surface has been exposed to. Harsh chemicals may damage the surface (e.g. paint removers, oven cleaners, etc.)
Can you just drill in to the Corian, without relying on going all the way through? Corian is plastic, after all. It is recommended not to use wood screws or sheet metal screws, because the material cannot expand around the screw, like wood or metal. It can easily crack if you try that.
This material is designed to withstand everyday wear and tear and last for decades, usually up to 50 years, without the need for major repair or replacement. However, should it be damaged, the solid surface can be repaired in the event of minor damage.
Cost Comparison of Countertop Material
Corian generally has a lower overall price tag, averaging $60-140 per square foot installed. Natural granite countertops span from $70 on the low end to over $200 per square foot for premium stone.
Solid Surface material, commonly known by the brand names Corian®, Swanstone, Staron®, Avonite Surfaces®, HI-MACS®, LivingStone®, STUDIO Collection®, and Wilsonart®, is a generic term for materials that are composed of two main ingredients: a natural mineral filler and a resin binder.
Corian comes in several finishes, from low-shine to high-gloss. Matte or satin, the least expensive, averages about $30 to $40 per square foot and is often used for lighter-colored surfaces. Semi-gloss and high-gloss are commonly utilized for darker countertop colors, costing, on average, $60 to $80 per square foot.