Roll Up Your Cable Gently When it comes to storing your USB cable, don't wrap it too tightly around your hand or an object. Roll it up gently and loosely, holding one end and creating loose, circular coils. This simple practice helps avoid kinks and reduces strain on the cable's internal wires.
2. Roll up your cable - loosely. When you're storing your cable, don't bundle it up in a big tangle - knots are bad news - but don't roll it up too tightly either. Instead of winding the cable around your hand, hold one end and create loose circular coils.
Use cable ties or rubber bands to roll them up neatly. Place your cords into boxes labeled by type. I repurposed old circular plastic takeout containers, as they are the right shape for coiled up cables.
Store Unused Cables in a Shoe Rack.
Bottom line, unplug cables when not in use. Not only can that prevent these sorts of unexpected power draws, but it also reduces the chances of the ports or connectors suffering accidental damage.
An old diaper caddy, garden organizer, or tool bag with large pockets can make the ideal cord storage system. Or try reusing a rotating tie or belt organizer to keep cords in line. Drape each cord on the individual hooks and hang it where it's out of reach for little ones.
Avoid Tight Bends: Ensure that the cord or hose isn't wrapped too tightly, as this can cause internal damage. Bending wires and hoses too sharply over time can lead to kinks and weak points.
Clips, zip ties, adhesive hooks, and coiled sleeves can all be used to corral TV cables together into a slim enclosure. The best way to put this to use is by pinning them along the baseboard behind the TV or the back of the piece of furniture that it sits on or above.
Cable protectors work by protecting the point at which the cable joins the plastic or metal plug. They should be made of a flexible material like rubber, to allow the cable to flex slightly when pressure is applied. If the cable protector does not flex, it merely moves the point of weakness further up the cable.
No – you should never run two extension cords together. Connecting two or more extension leads together (sometimes known as 'daisy-chaining) is unsafe for several reasons. Only use one extension lead per socket and never plug an extension lead into another extension lead.
Armor cords with tubing
There is an easy way to protect them from little munchers. Buy a roll of clear vinyl tubing, make a slit down one side of the tubing and slip it over vulnerable cables.
Unplug your extension cords when they're not being used.
Did you know that extension cords continue to use energy while they're plugged in? If there is a short, the extension cord can overheat. It's best to unplug the extension cord while it isn't in use. This is considered an electrical safety best practice.
Don't use more than one if possible , but under no circumstances exceed load rating on the cord or 80% of the receptacle rating. Even then if any of the load is inductive you could be in trouble!
In communication cables, aluminium foil gives long-term insulation against moisture and attack from naturally occurring corrosive elements found above and below the ground. Aluminium foil also acts as an insulator against the magnetic and radio frequency fields associated with metal electrical cables.
In contrast, the OSHA standard, which is based in large part on the National Electric Code, requires that the cords be "approved," and prohibits the repair of cords smaller than No. 12. Consequently, the use of tape to repair a worn or frayed cord is permitted under the MSHA standard but not under the OSHA standard.
Namely, every device you own that is kept plugged in poses some safety threats. Fire risk, device malfunction or damage due to the power surge are real risks that you should consider, especially if leaving your home for a longer period.
Other than having a higher electric bill, leaving your appliances plugged in can cause all sorts of hazards in your home, including increased fire risks.
Devices such as laptops and mobile phones are not designed to be plugged in all the time. When they're always plugged in, you end up killing the cells in the battery which will limit their life. Experts say keeping devices charged between 40% and 80% will increase the life of your battery.