For best results, clean the plastic trim with isopropyl alcohol so there is no residue, only bare plastic. Use a microfiber applicator or foam applicator to apply Solution Finish Trim Restorer onto the plastic. Wipe off excess product with a clean towel and allow the plastic to dry for 6 hours.
Faded and Dull Plastic
WD-40 Specialist Silicone can help revive their appearance. Spray a small amount onto a cloth and gently rub it onto the plastic surface. The formula can help restore the shine and vibrancy of the plastic, making it look like new again.
One of the easiest ways to fix these errors is by applying drywall mud or wood putty to the holes and gaps. This will smooth out damaged texture and hide a multitude of trim and molding sins. If your molding is painted, drywall mud is a better option as it can be easily painted over.
You can either use epoxy to fill in and hold the plastic trim pieces together or fuse plastic trim pieces by using a plastic welding tool to melt the pieces together. After the repair, sand and paint the repaired area.
Braids and buns help disguise a bad haircut by drawing attention away from the areas of your hair you don't like. There are all sorts of braid and bun styles you can use, from French braids and crowns to top knot buns or low buns. You can also mix and match braids with buns to create a stunning new look.
Take a moment to clean off old dressings at least every two months using BLACKFIRE APC All-Purpose Cleaner. Spray your microfiber towel, and wipe down the trim pieces to avoid overspray. This product excels at removing dried-on wax and polish residue, especially from pebble-textured plastic trim.
WD-40 can be used on just about everything. It is safe for metal, rubber, wood and plastic. WD-40 can be applied to painted metal surfaces without harming the paint. Polycarbonate and clear polystyrene plastic are among the few surfaces on which to avoid using a petroleum-based product like WD-40.
Fix scratches with a fill stick, restore moulding with hot glue, and cover damage with wood filler. Sand and paint for a beautiful finish.
In terms of longevity, Black Trim Restorer can last up to 6 months or more on exterior plastic without any boosting.
To make wood trim look more current and fresh, I suggest staying FAR AWAY from any very warm tone on the wall. Nothing is going to make your dark wood trim look more orangey or “dated” than choosing a warm color tone on your walls (yellow, tan, orange, red etc..).
Soapy water and sandpaper: The method offers a simple and effective solution for restoring slightly faded, hard plastics. It works by gently abrading the oxidized outer layer of the plastic with the sandpaper (a grit of 150 or 220). The soap acts as a lubricant, preventing scratches and promoting a smooth finish.
Using a Trim Restoration product will renew the shine, color and appearance of plastic and rubber. Trim Restorers also provide an extra layer of protection from future fading, keeping that like-new appearance longer.
Anchor the edging in place with edging stakes at 3 to 4 foot intervals. Use a rubber mallet to drive each stake at a slight angle from the lower outside face of the edging through to the other side.
Grab a bottle of olive oil from the kitchen cupboard (extra virgin olive oil is best) and apply a coin-sized amount of oil to a dry microfiber towel. You can also try using WD-40. Gently rub the oiled towel on the faded plastic using small, circular motions.
Soak plastic in hydrogen peroxide for 3-4 hours to fix discoloration. Hydrogen peroxide works well on plastics that have turned entirely yellow instead of in just one spot.
Common plastics are made of thermoplastic polymers with strong molecular structures that are insoluble in water, so vinegar will not dissolve them under normal circumstances. However, there is a chance of color change and brittleness in low-grade plastics not designed to contain vinegar for a prolonged period.
Place the plastic pieces under the sun and leave them there for at least a day. It's the UV rays from the sun that in combination with the hydrogen peroxyde will make yellowed plastic white again.
Small dings, scratches, and cracks can be repaired using wood putty. For larger areas with more extensive damage that requires it to be rebuilt, such as deep gouges or broken corners, epoxy filler is a better option.
On dry hair, comb hair through in small sections, then using shearing scissors (also called thinning scissors, they have fine 'teeth' along one of the blades), let the scissors catch the damaged hair. (They can be razor-sharp, so handle with care).