Mixing warm water and light dish soap is one of the easiest ways to clean porcelain tiles. This method is gentle enough to use on both glazed and unglazed tiles: Put warm water in a bucket and a few drops of light dish soap in it. Mix the solution well to make a blend that feels like soap.
For most types of tile, including porcelain and ceramic, you only need one key ingredient: A DIY mixture of warm water and dish soap will do the trick. Follow these steps to clean tiles: Spray the water and dish soap solution on the tile surface. Wipe the area with a damp microfiber towel or cloth.
Grab your bucket and fill it up with 1 gallon of hot water then stir in ¼ cup of white vinegar. Vinegar is a tough yet natural cleaning solution that will surely clean up any messes that may be found on your tile. Go on and mop the floor with your vinegar solution. Or use a large sponge.
LTP Porcelain Floor Tile Cleaner is especially formulated to clean porcelain and ceramic without damaging the grout or tile. Leaves the floor with a fresh clean fragrance. Suitable for use on both sealed and un-sealed, polished and unpolished surfaces.
While vinegar is safe to use on laminate, vinyl, porcelain, and ceramic tile, it is best to use it sparingly since the acid in the vinegar can dissolve the finish on your floor. Therefore, when you are using it on tiled floors, you want to make sure you cut it with water or rinse it completely with water.
To revive dull, faded tiles and give them a gorgeous shine, an ammonia-water mix is one of the best. This inexpensive and easy-to-use solution is powered by the natural cleaning properties of ammonia and will leave your tiles looking their best.
Porcelain tiles tend to be harder, more resilient and more stain-resistant than ceramic tiles. They are one of the easiest types of tile to maintain but their surface can eventually be eroded by the regular use of corrosive chemicals such as ammonia, bleach or acids that can also damage the grout and loosen the tiles.
Though popular for being gentler alternatives to harsh chemical cleaners, baking soda, Borax, and even salt can harm the finish of your porcelain fixtures. As gentle as they are, these compounds are still abrasive and will scratch your finish, especially with regular use.
You may have guessed where this is going: porcelain tiles are not waterproof, they are water resistant. That means that if you submerge them in water long enough, then they will eventually allow that water to seep through.
Swiffer wet cloths are designed to be used on most floor surfaces, such as: vinyl. porcelain tiles. ceramic tiles.
That being said, non-abrasive cleaners are the best way to clean a porcelain sink. Common household go-to's like bleach and hydrogen peroxide can be used to clean white porcelain, but the solution would need to sit covered in a layer of paper towels for 30 minutes to an hour.
You can also use Pine-Sol® Original Squirt 'N Mop®. It's safe for wood and hard nonporous surfaces like ceramic and porcelain tiles, and also sealed granite. You can apply this product directly from the bottle over a 3' x 3' area and start mopping.
To clean your porcelain and ceramics, start with a gentle dish soap and water. Slavid advises taking off your rings and to avoid using harsh scrubbers like sponges or toothbrushes. Wash using just your hands and sudsy water.
Shower Walls
Dawn dish soap and vinegar – Mix equal parts of vinegar and blue Dawn dish soap into a spray bottle. Run the shower for a few minutes on hot to heat up the shower space. Spray to coat the surface of the shower walls evenly with the mixture. Let sit for 5 minutes then use a damp cleaning rag to wipe away.
The surface of porcelain and ceramic tile do not require sealing, however, it's important to note that even though your porcelain or ceramic tile does not need to be sealed, the grout used during installation will need to be sealed and maintained.
The day-to-day cleaning of porcelain stoneware is carried out using a floor cloth and a mix of hot water and a neutral detergent readily available on the market. We recommend avoiding waxes and polishes and abrasive tools such as metal scouring pads and hard-bristle brushes.
Porcelain tiles aren't waterproof, they are water resistant. They are not completely waterproof, however, they are more resistant to water (as compared to standard ceramic tiles).
For white porcelain only, bleach can be used to remove stains; never use chlorine bleach in colored or vintage porcelain, as it can damage the finish. For both white and colored porcelain, liquid oxygen bleach (such as hydrogen peroxide) is a good alternative.
To clean ceramic and porcelain tile, spray your cleaning product on the tile and let it sit for five to 10 minutes. You don't want the cleaner to dry; you just want it to have time to do its work. After that time has passed, go in there with a non-scratch scrub pad and use the “S” pattern to clean from top to bottom.
Murphy® Oil Soap and other non-synthetic solutions are safe to use on tile and grout without wearing down either one, but other natural solutions include rubbing alcohol, particularly for more set spots of mildew. Fill a spray bottle with your solution and apply it where it's needed.
When it comes to mopping tiles, they can collect a lot of dust and dirt. If we don't brush this away before mopping, it can build up and cause the tiles to look unclean. Even when not mopping, we recommend doing this anyway as part of a regular maintenance cleaning process.
Porcelain tiles or ceramic tiles can be polished using white vinegar and dish soap, plus a microfibre cloth. Wood tiles generally need to be waxed using specific floor wax.