Refinishing hardwood floors is the process of removing the existing layer of finishing product (which is usually done using a sanding tool to get down to the bare wood) and then reapplying another coat to your floors to protect them and make them look brand new.
According to HomeAdvisor, the typical price range to refinish hardwood floors is between $1,074 and $2,485, with the national average at $1,757. This comes out to $3 to $8 per square foot, including materials and labor. Roughly 80 percent of the cost to refinish hardwood floors comes from labor.
Depending on the product used, and the current weather conditions, each coat could take either hours or days. Figure at least two days for the “sand and poly” job or three to seven days for a full refinishing project, plus at least one day if you're adding color.
If your hardwood floors have been sanded and finished with Bona Mega Clear HD, it is safe to sleep in the home about 2-3 hours after the project is finished, but again, only if there are other rooms that have not been robbed of their furniture – furniture should stay off floors for at least 24 hours after ANY project ...
Even if it's not causing migraines, it's still uncomfortable to live in a house where the floor is being refinished and there are strong odors in the air. If yours is a professional space, it can compromise work quality and work productivity of the employees as well.
In general, it will almost ALWAYS be less expensive to refinish your hardwood floors. If you replace them, you need to pay for additional wood as well as ripping up and hauling away existing hardwood.
Refinishing wood floors is a great way to extend the life of your flooring and is cheaper and more environmentally safe than a full replacement. If you're tired of the current look of your floors and want an update, you can refinish your floors to get an entirely new look with much less effort and inconvenience to you.
Installing hardwood flooring averages between $6 and $12 per square foot. On average, wood flooring costs between $3 and $7 per square foot for materials and $3 to $5 per square foot for labor. An estimate for installation of 1000 square feet of hardwood flooring runs between $6,000 and $12,000.
You can undertake to refinish yourself — but the professional treatment is sure to leave you most satisfied. Resurfacing your floor involves more than just putting a layer of polish on top. It may require removing old floorboards, grinding down uneven boards, and reinforcing wood planks with new nails.
Applying a revitalizer gloss is the simplest and cheapest way to refinish hardwood floors. This approach works best on floors that only have surface-level scratches and other minor wear and tear issues. You can get the job done without the need for equipment rentals or hard-to-find materials.
A solid hardwood plank at least 3/4 inches thick will likely need to be refinished four to six times during its total lifespan. It's commonly accepted that you refinish every seven to ten years. Important note: some hardwood is only 1/4 inches thick. In this case, a refinish could strip away all traces of the floor.
If you only have some minor scratches and dings or a dull finish, you might be able to simply buff and add a new coat of varnish. But, even if your floors need a complete makeover, refinishing hardwood is a very manageable and rewarding do-it-yourself job that can save a lot of money.
Random orbital sanders are the best choice for do-it-yourself hardwood floor refinishing. They take longer to remove old finishes than drum sanders, but they do not require a lot of experience to use and are less likely to damage your wood floor.
Refinishing Prefinished and Laminated Hardwood Floors
Whether you have traditional hardwoods, prefinished wood, or laminated wood, restoring without sanding is a practical solution. Though you can sand your traditional hardwoods, it's difficult or even impossible to sand prefinished or laminated wood floors.
Takeaway: Your worn down pre-finished hardwood flooring can be refinished up to 5 times. You can change the color of the entire floor each time that it's completely refinished. Leave the bevel in the floor and DO NOT have the bevel filled. Pre-finished hardwoods show scratches more than site-finished hardwoods.
How long do I have to wait to use my room after my floors are refinished? We recommend waiting 6 hours before walking on your new floors in socks. After 24 hours you can walk through with shoes on. Allow 48 hours before setting furniture and returning pets.
Wait 48 to 72 hours after the hardwood has been refinished/ finished before "PLACING" furniture back in its place. Keep a steady temperature and humidity within your home. Dramatic swings in temperature will cause hardwood to shrink or to cup. Sweep/dust and mop often.
So is it possible to pull up hardwood floors and reinstall them? Yes, this is definitely possible. Since they are environment-friendly and extremely durable, hardwood floors are often reused when remodeling or building a home. They also offer better aesthetics and lower costs than buying new materials.
When you refinish your floors, you can change the color of your flooring. Most hardwood floors can be made darker, lighter, redder, or anywhere in between. If your flooring is solid hardwood, it can be sanded and refinished in a different stain for a different appearance.
LVT planks have an incredibly realistic wood look, and vinyl flooring care and maintenance is a breeze. Here's something even better. If you've been graced with authentic hardwood flooring, it isn't even necessary for you to remove it before installing LVT!
It is a terrible idea to sleep or stay in a house after staining floors. The stain fumes are often overwhelming and highly toxic. In addition, exposure to such a stinky smell for long periods of time can trigger severe breathing problems and other health issues to both humans and pets.
Furniture should be removed if all floors in a house must be refinished. Moving the furniture from room to room is difficult and time-consuming. Instead, removing the furniture from the house requires only two moves, instead of constant shifting throughout the refinishing process.