The only effective way to lighten the color of wood after it has been stripped of all surface coatings is to use a wood bleach. Sanding does help to lighten wood in many cases, but this only applies to surface soil or grime, and even then only if the discoloration has not penetrated very deeply.
Yes, it is possible to make stains lighter. Use a wood furniture refinishing kit to remove the dark wood stain and apply a lighter stain. You might want to stain wood with a different color if you notice any visible nicks or scratches. You can also opt to hire professional refinishers to ensure an easy finish.
Lightening. Dark wood can be lightened with stain for an interesting light-dark effect. Lightening is not recommended for fine woods because it covers the natural color and grain of the wood; as a last resort, though, it can be effective.
Steel wool and mineral spirits can lighten your wood stain by a small amount if you don't need to adjust the color much. Otherwise, if you have stain in the can that's too dark, you can dilute it to change the color before applying it.
Lay a brightly patterned runner across a wood dresser or table. Opt for bold bedding or wall art in a bedroom outfitted with wood furniture. Table lamps, vases, and planters in a rainbow of colors can also help cheer up dark wood furniture.
If you try to apply a light color of stain over the top of an existing dark finish, you won't notice much difference. To completely alter the color of the finish, strip down the existing stain using a petroleum-based solvent. Once you've lightened the wood, you may add a lighter color of stain.
The only effective way to lighten the color of wood after it has been stripped of all surface coatings is to use a wood bleach. Sanding does help to lighten wood in many cases, but this only applies to surface soil or grime, and even then only if the discoloration has not penetrated very deeply.
Using a brush, spread a thin coat of the bleach solution on the surface of the furniture. It is best to apply the bleach along the wood grain. Make sure to cover the entire surface and let it sit for approximately 30 minutes so it can turn dark wood lighter.
Use Steel Wool to Lighten Stained Wood
Steel wool is a viable option to lighten wood without sanding. Start by dampening your 0000 steel wool in warm water. Run the steel wool along the grain of your wood to avoid scratching it.
PolyShades stain and polyurethane also allows you to easily change the color of your currently stained or varnished wood without stripping. Over old varnish you can change the color without removing the old finish or hiding the grain.
For pieces where you have a dark finish and want to go lighter, you will need to remove the existing finish first. Then, determine what undertone your wood has and counteract it with an appropriate stain color. For pieces that are a light finish, and you want to go darker, you can simply apply a darker stain!
My first tip for working with dark wood furniture is to use tones (paint, bedding, pillows, artwork, curtains, etc.) that compliment the wood tone – usually warm, neutral colors. In this design, I painted the walls BM Revere Pewter – a warm gray.
Bleaching wood furniture lightens the overall color of the wood, giving it a clean, bright look. While bleaching isn't intended for removing stains, it will proportionally lighten the stains and reduce their visual impact.
Depending on the species of hardwood flooring it will fade, bleach, or darken when exposed to the sun. Wood is photosensitive material so if there is overexposure to ultraviolet (UV) rays then there will be an effect on the color of the floors. It is said that about 40% of all interior fading happens from UV rays.
Deglossing and cleaning your dark wood furniture before painting is really important. This step prepares the dark wood for painting. Done properly, the paint will have a good surface to adhere to and last a long time. Use Simple Green and clean cotton painter's rags to degloss all of the surfaces thoroughly.
How do you make wood stain lighter? Because stains penetrate the surface, it's impossible to apply a lighter stain over it. The original stain has to be removed. In order to remove a wood stain, the surface has to be sanded repeatedly until the original stain is completely removed.
To lighten already-applied wood stain, first try turpentine, mineral spirits or household bleach. Apply firmly and evenly along the grain.
Have you ever stained a wood piece, only to find the wood stain was significantly darker than you expected it to be? Well, there's a way around that. Wood stain can be diluted with minerals spirits, water, or lacquer thinner, depending on the type of stain.
Stains lighten as they dry, then return to their damp color when a finish is applied. So the quick method of seeing the color you'll get with the finish applied is to look at the stain while it is still damp. If you're using a satin or flat finish, however, you need to factor in the impact of the flatting agent.
Sand away the stain with 150-grit sandpaper.
Switch to a finer sandpaper once you reach the bare wood. Take 150-grit sandpaper and sand the stain directly, again along the grain of the wood. Continue sanding until you remove the whole stain.