A change in texture is the biggest visible sign that something has gone wrong. Traditional wood stain should still be a liquid. Gel stain should still be a pudding-like texture. Any indication that the stain has separated, turned stringy, dried up, or had any other change in texture is a sign that it's gone bad.
Oil-based stain can be kept for 1 year if the cans have been opened, but unopened cans will last 2 - 3 yrs. Water-based stain will last 1 year, if opened, and 2 years, if unopened. Oil-based varnishes will be good for 1 year, opened or unopened.
No, the sticky stains will not dry after some time, which is why it is important to wipe off the excess wood stain. If you don't, your work will end up sticky because the stain did not dry properly. You will have to use mineral spirits, more stain, or sandpaper to fix the mess.
How long do you let stain sit before wiping it off? For a lighter stain, wait 5 to 15 minutes before wiping away. For a deeper shade, wait 30 minutes. However, don't allow the stain to dry on the surface before wiping.
Staining over stain is easy and works beautifully if you're applying a dark stain over a lighter stain on the wood. Remember, it's the same principle as dying your hair! This rule applies to oil-based stains, water-based stains, and gel stains.
Using most gel stains, you can darken wood furniture, or stay the same color, without sanding off the old stain. But, I usually use General Finishes Gel Stain because the finish always looks beautiful. Don't forget to Save or Share these steps for how to stain wood without sanding.
Depending on your project, you will not need to remove old stain before restaining. If you want to darken the stain on your wood project, then removing the existing stain is not necessary!
Yes, you may apply stain over an already existing stain on the wood. This process is a fairly easy one as long as all the tools are available. The good thing about a staining project is that you have control over the resulting wood tones. It is easier to apply a darker wood stain than a lighter one.
The longer a stain is left untreated, the less likely it is to be removed. When a spill first occurs, it sits on the surface of the fabric, but over time, that spill can start to react with the fabric causing the fabric to actually change colors.
Temperature-Sensitive Items
Paint, refinishing solvents and stain in garage storage will spoil. Some paints separate, and you'll be left with a curdled, unusable mess.
Using a lint free rag is the best way to apply wood stain because it is great for controlling the amount of stain that is applied and for removing any excess stain. Also, the rag leaves a beautiful, even, and brush stroke free finish. It also can easily be thrown out once finished.
For more professional-looking results, use a sprayer or roller to apply the stain first. Follow with back-brushing to eliminate drips and runs. Stain pads do an excellent job of applying the correct amount of stain, especially on smooth wood.
The most efficient method of applying stain is to wipe it on using a soaking-wet cloth.
A common mistake when applying stain is not taking weather, temperature and moisture into account. Staining when the deck surface is too hot or the wood is too wet; when rain is too imminent or when nighttime temperatures are too cold can all lead to problems down the road and shorten the life of your stain.
Greasy / Oil Stains – such as hand lotion, hair mousse, lard and butter. Oxidisable Stains – key ingredient in alcoholic drinks, coffee and tea (without milk) and soft drinks. Particulate Stains – such as mud and ground in dirt. Combination Stains – these stains can be a mix of two or more of the above stain types.
Treat stain immediately. Soak 30 minutes or more in cold water. Rub detergent into stain. If stain persists, place a small amount of household ammonia on the stain and rub again with detergent.
If you used a penetrating oil stain, you may have allowed the stain to build up too thick a coat on the surface of the wood. Penetrating wood stains are not intended to be a surface finish. If applied too thickly, they won't dry properly and will remain tacky to the touch.
We always recommend two coats of stain for any wood project, but you should only apply as much stain as the wood can absorb. Extremely dense hardwoods may only be able to absorb one coat of wood stain. The general rule of thumb is to apply only as much deck stain as the wood can absorb.
Make sure you sand the wood well before applying stain. Any scratches will be enhanced by stain. Sanding will also help open up the pores of the wood so that they can absorb stain better. Start with 80 grit to remove big scratches and imperfections, then move up to 120 and finally 220 grit.
Wood stain is intended to be wiped off immediately after application. If the wood stain remains on the wood, liquid solvents in the stain will evaporate, leaving sticky pigments behind that will never fully dry. To remove tacky wood stain, firmly scrub the piece with mineral spirits.
You can leave wood stain overnight because it is part of the drying process. After the first coat, you should allow it to dry for at least 12-24 hours. Follow the same process for the second coat.